Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2641-2688 of 5340
Price: $185.85

Buy Details

Availability: In-Stock Item
Item #: 20409 -

If you shop around you will see many places charge less than this... We have tried several different places that restore stainless trim and they all came back less than mint. These are arrow straight and have been polished to a very high luster. This trim parts will accentuate your new paint job in an incredible way!"...Don - Happy Fourth of July. I wanted to send a note to your team of gratitude for all the help they provided me over the last three years restoring my Cougar. As you know, it...

Price: $154.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12661 -

Good used four piece set with no dings or heavy scratches. Ready to install on your Cougar as is or polish them to a mirror like finish to be installed on a show car.

Price: $163.65

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31774 -

New item as of February 2021! These are sold as a pair, the mounting hardware kit is sold separately. These anodized bright dip mouldings are much closer to the original design than our Premium Stainless mouldings. They are side specific (The more rounded edge mounts towards the rear and the flatter edge mounts towards the front) and will not fit on a 1970 model (due to the increased size of the wheel opening) unless you delete the wheel opening mouldings. Replaces Ford moulding part numbers...

Price: $525.00

Buy Details

Availability: In-Stock Item
Item #: 33135 -

Set of four NOS vinyl top mouldings. The vast majority of hardtops in 1969 and 1970 had painted mouldings, but on two tone painted cars and the 1970 "Hounds-tooth" edition, chromed mouldings were supposed to be included. However, we have found exceptions to the rule.NOTE: These mouldings will have some shelf wear, see photos above. If you have extra sets of cores, we would be willing to give in store credit. Ford casting numbers on backs:  Driver side C9WB-65423A19 Passenger side...

Price: $595.85

Buy Details

Availability: In-Stock Item
Item #: 30942 -

Set of four re-chromed vinyl top mouldings. The vast majority of hardtops in 1969 and 1970 had painted mouldings, but on two tone painted cars and the 1970 "Hounds-tooth" edition, chromed mouldings were supposed to be included. However, we have found exceptions to the rule. If you have extra sets of cores above and beyond the four needed to exchange, we would be willing to give in store credit. Restored moulding will not ship until we receive your cores. All mounting studs must be intact to be...

Price: $322.38

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15504 -

Good set of four die cast original top mouldings for both two tone paint Cougar hardtops and Cougars with a factory installed vinyl top. No broken studs, cracks, bends or chips. Originally these came painted and in rare cases like the 1970 Hounds-tooth edition or select two tone paint cars, those came chrome plated. These trim parts will need to be painted, Includes 15 new or used speed nuts for installation, just in case. This icon means that we're looking to buy this part!WCCC is a buyer of...

Price: $593.87

Buy Details

Availability: In-Stock Item
Item #: 20428 -

These trim parts (as with all our restored aluminum) feature the correct bright dip anodized plating, just as they came from the factory. If you have extra cores you would like to sell then we would like to hear from you! Please DO NOT send heavily damaged trim parts as the finished product will be delicately thin. Cores that are corroded, torn, smashed or kinked are not acceptable cores either.  Please, only send cores with small dings, scratches and dullness.  Extra screw holes and...

Price: $203.85

Buy Details

Availability: In-Stock Item
Item #: 33053 -

Set of 4 reproduction wheel lip mouldings for the 69-70 Cougar. These are spot on and we had no problem fitting them on our cars, the only difference we noticed is that the aluminum is softer than the originals and prone to dimpling. And since they're reproductions, no cores are required! Keep in mind that when you remove your rear core mouldings, you can send them to us as they might be eligible for in store credit. For more info on aluminum trim restoration & core exchanging, check out our...

Price: $314.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20422 -

Good set of four used wheel lip mouldings for your 1969 - 1970 Mercury Cougar. What is considered to be an "acceptable core" is solely at our discretion. If you are in question as to what good cores are, please send quality, in focus, close-up digital pictures to westcoast@classic-cougar.com *NOTE* Some "on the edge" cores that need extra labor can be given a partial credit.*Note - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC....

Price: $209.88

Buy Details

Availability: In-Stock Item
Item #: 20429 -

This original FoMoCo, five piece windshield trim set has been lovingly restored to far beyond the original luster. Stunning brilliance, perfect match for that high end paint job. Because these pieces are restored original pieces, they will have far superior fit and finish when compared to "offshore" reproductions. This package is also an excellent option for you Mustang owners as well.Ford part numbers include: C9ZZ-6503136-A, C9ZZ-6503137-A, C9ZZ-6503144-A, C9ZZ-6503148-B, and C9ZZ-6503149-B....

Price: $145.76

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20431 -

Because this windshield moulding set is comprised of used original pieces, it will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. They are a great option for those of you who like to restore your parts yourself and are also an excellent option for you Mustang owners as well. Ford part numbers include: C9ZZ-6503136-A, C9ZZ-6503137-A, C9ZZ-6503144-A,...

Price: $510.89

Buy Details

Availability: In-Stock Item
Item #: 27130 -

Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. This original FoMoCo, six piece windshield trim set for the Mercury Cougar convertible has been lovingly restored far beyond the original luster. Stunning brilliance, perfect match for that high end paint job. Because these pieces are restored original pieces, they will have far superior fit and finish when compared to "offshore" reproductions. This package is also an excellent option...

Price: $400.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27139 -

This original FoMoCo, six piece windshield trim set for the Mercury Cougar convertible. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions. This package is also an excellent option for you Mustang owners as well. The four upper pieces are wider than the coupe versions, but the lowers are the same (with about an inch cut off the ends). The trim is... trimmed so it will fit underneath the pillar trim pieces. *NOTE* If your trim has...

Price: $349.89

Buy Details

Availability: In-Stock Item
Item #: 20432 -

This 3-piece blemished front trim set and a scratch obtained during shipping, an irregularity in the anodized plating process, a ding in a hard to reach spot, a slip on the buffer wheel... There are many reasons why we label our restored trim parts as blems. We carefully examine every trim part that comes back from our restorer for the smallest of imperfections. If we would not place them on our $40,000.00 Cougar we do not expect you to. From 10-15 feet away these look as good as our...

Price: $469.85

Buy Details

Availability: In-Stock Item
Item #: 11673 -

These restored mouldings have the correct "bright dip" anodized finish and look almost like NOS! This set is offered at a great price and is better quality than many NOS trim parts as they often show the scars of 40 years of shelf wear. Note, we cannot restore torn, smashed, or heavily damaged cores. If you are in question as to whether your cores can be restored or not please send us a picture and we will let you know whether you should send them to us for credit or exchange. *Tip* Even if...

Price: $20.05

Buy Details

Availability: In-Stock Item
Item #: 15822 -

Reproduction sway bar mount for your 67 - 70 Cougar or Mustang. Close to original design, but misses by a mile. Does not share the correct contour as originals. Welds to the front frame rail.

Price: $65.57

Buy Details

Availability: In-Stock Item
Item #: 32638 -

Original driver side sway bar mount for your LATE 1968-70 Mercury Cougar or Ford Mustang. Nice original, removed from our better cars. Metal cleanup needed, we cut these a little generously to protect the bracket. Two versions available in 1968. Both curved and straight cut, even on the same car. Original part number is 5A483. The MPC and other manuals refer to this bracket as: reinforcement and mounting bracket for front stabilizer bar. One per side, this is the driver side only. See related...

Price: $20.05

Buy Details

Availability: In-Stock Item
Item #: 15821 -

Reproduction sway bar clamp mount for your 67 - 70 Cougar or Mustang. Close to original design, but misses by a mile. Does not share the correct contour as originals. Welds to the front frame rail.

Price: $65.57

Buy Details

Availability: In-Stock Item
Item #: 32637 -

Original passenger side sway bar mount for your LATE 1968-70 Mercury Cougar or Ford Mustang. Nice original, removed from our better cars. Metal cleanup needed, we cut these a little generously to protect the bracket. Two versions available in 1968. Both curved and straight cut, even on the same car. Original part number is 5A483. The MPC and other manuals refer to this bracket as: reinforcement and mounting bracket for front stabilizer bar. One per side, this is the passenger side only....

Price: $22.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24524 -

For all 1969 Mercury Cougar trunks. The MPC lists the correct length as 8-3/4 inches in total length, with 4 inches of the end being threaded but we have found without fail them to be about 10 3/4" with about 3" of threads. I say "about because some have a blunt end while other versions have a tappered end which will add about 1/8" to the length. Those threads are 1/2-13.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0085 -

Three required per car, held in place by Allen head bolt, fits in the three slots at the top of the column tube.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.Fits: 1968 Mercury Cougar1969 Mercury Cougar 1968 Ford Mustang1969 Ford Mustang ...

Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24559 -

Air compressor mounting pedestal for 1969 and 1970 Mercury Cougars or Ford Mustangs with 390 or 428CJ engines. Casting number C9AA-2882-A.Ford part # C9AZ-2882-A.

Price: $161.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15118 -

Used cast iron pedestal mount for the air conditioning compressor on all 1969 cars with either the H code 351-2V or the M code 351-4V engines. Casting number C9OA-2882-B.Ford MPC part # C9OZ-2882-B.

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24394 -

Used alternator bracket for any 1968-69 Mercury Cougar or Ford Mustang with 289 / 302 / 351W engine, but without factory smog pump.Replaces Ford part number C8OE-10156-A.*Trivia - the only difference between this bracket, and the C6OE-10156-A bracket is the thickness of the steel. Either one will work on 289/302/351W engines 1966-69.

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24334 -

Used alternator mounting bracket for any 390 / 428CJ engine without smog. This is the correct bracket and was found on 1968 390-2V or X-code Mercury Cougar and Ford Mustangs. 1969 390-4V or 390IP engines in any Mercury Cougar or Ford Mustang. If you aren't a concours person or care about correctness, this alternator installation style is the cheap way to go if you aren't planning on installing the thermactor smog components. Look in the related items list for the adjusting bracket and...

Price: $36.35

Buy Details

Availability: In-Stock Item
Item #: 14323 -

Replaces Ford part number C9ZE-10A336-A. One year only Design.

Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24793 -

One year only design. This eliminates the need for the tubular spacer, and is more sturdy. Fits any 1969 Mercury Cougar or Ford Mustang with 351W engines.Replaces Ford part number C9ZE-10A336-A.

Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 19829 -

This used original Bendix spacer bracket is mounted to the rear of the brake booster on the 69 - 70 Cougar and Mustang. These spacer brackets sometimes come up missing when purchased from discount booster rebuilders. If you get a booster that has a piece of plate steel and spacers in place of this stamped steel bracket, it is a go around (homemade). This plate differs from repro in that the mounting holes are the correct size and it has the correct relief spacing for the input rod dust boot....

Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 15688 -

This reproduction Bendix spacer bracket is mounted to the rear of the brake booster on the 69 - 70 Cougar and Mustang. These spacer brackets sometimes come up missing from some booster rebuilders. If you get a booster that has a piece of plate steel and spacers in place of this stamped steel bracket it is a go around (homemade). This plate differs from original in that the holes are smaller than factory so they will need to be enlarged and there is no relief spacing for the input rod dust boot...

Price: $74.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24265 -

Original FoMoCo used part in good condition. Casting number is C7AA-3A772-B. Fits both small and big block. This is really the way to go... Original OEM FoMoCo with all the right markings and about half the price or repro. Ford Part #: C7ZZ-3A732-B.

Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31320 -

This aluminum ninety degree bracket is what fastens the XR7 chrome boot moulding to the quarter panel. The beltline weatherstip also attaches to it. This part is only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass, whereas the XR7 diecast trim goes all the way to the door jamb.You can find our reproduction pair of brackets here. ...

Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 31321 -

These aluminum ninety degree brackets are what fastens the XR7 chrome boot moulding to the quarter panels. The beltline weatherstip also attaches to them. These parts are only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass, whereas the XR7 diecast trim goes all the way to the door jamb.

Price: $69.89

Buy Details

Availability: In-Stock Item
Item #: 31319 -

This aluminum ninety degree bracket is what fastens the XR7 chrome boot moulding to the quarter panel. The beltline weatherstip also attaches to it. This part is only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass, whereas the XR7 diecast trim goes all the way to the door jamb.You can find our reproduction pair of brackets here. ...

Price: $41.75

Buy Details

Availability: In-Stock Item
Item #: 41896 -

Metal stamped brackets used to mount the radiator on saddle mounts styles only. Rubber insulators not included.Check out our video on Radiator and Fan upgrades below:

Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26781 -

When you compare the originals to the reproductions you will see minor differences. This is one of the first things you look at when you open the hood of your car. For those that are looking to keep their car original, investing a little elbow grease in clean up on these used brackets is the way to go. Consider adding the upper rubber pieces to your order, see related items.These brackets came in two configurations, most has the round mounting holes but some were punched square. Not for use on...

Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18526 -

This special bracket gets glued to the windshield. Rear view mirror bracket gets mounted to it. Glass bead blast it or just use a wire brush and it is ready to go!

Price: $216.67

Buy Details

Availability: In-Stock Item
Item #: 30839 -

Reproduction thermactor smog anti-backfire valve canister mounting bracket. For all 1968 390GT engines, GT-E 427-4V engines, and 1968-70 428 Cobra Jet engines. Painted Ford engine blue a shown. Nice reproduction, made in the USAFord part # C8AE-9C486-A.

Price: $182.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24346 -

Thermactor smog anti-backfire valve canister mounting bracket. For all 1968 390GT engines, GT-E 427-4V engines, and 1968-70 428 Cobra Jet engines. Ford part # C8AE-9C486-A. *RESTORATION TIP* This bracket was painted Ford Engine blue from the factory.

Price: $104.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32973 -

Used mounting bracket for the sunroof motor on the 67 - 70 Mercury Cougar. This bracket is only used with the 67 - 70 power sunroof motor.

Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24881 -

Bracket that mounts in the rear Carburetor mounting holes of all 1969 and 1970 351 Windsor 2 barrel or H code engines. Has the square hole that holds the factory throttle cable.Replaces Ford part number C9ZZ-9741-D.

Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 26533 -

Bracket that mounts to the rear Carburetor mounting holes of all 1969 351-4V and 428 Cobra Jets or Super Cobra Jets. Has the square hole that holds the factory throttle cable and hole for the return spring. *Note - This is not a flat bracket like the 1970 351C-4V. There is a distinct drop in the bracket to clear the underside of the Holley carburetor on Cobra Jet equipped cars.

Price: $160.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24879 -

Bracket that mounts to the rear Carburetor mounting holes of all 1969 351-4V and 428 Cobra Jets or Super Cobra Jets. Has the square hole that holds the factory throttle cable and hole for the return spring.  Replaces Ford part number C9ZZ-9741-B. *Note - This is not a flat bracket like the 1970 351C-4V. There is a distinct drop in the bracket to clear the underside of the Holley carburetor on Cobra Jet equipped cars This is the original factory bracket, reproduction brackets have...

Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24880 -

Used with factory "Autolite" carburetor and aluminum carburetor spacer unique to the 1969 Cougar. Bracket that mounts to the rear Carburetor mounting holes of all 1969 390-4V. Has the square hole that holds the factory throttle cable and hole for the return spring. Has a distinct dip or curve, midway between the mounting holes for the carburetor.Replaces Ford part number C9ZZ-9741-C.

Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 15319 -

Nice reproduction of the Boss 302 throttle bracket as found on the G code Boss2 cars. Includes 1969-70 Cougar Eliminator and Mustang. Similar to the 428 Cobra Jet bracket but with an extended spring tab.

Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32862 -

Original FoMoCo used windshield wiper motor mounting bracket for your 1969-70 Mercury Cougar or Ford Mustang. This used bracket comes with grommets, for all 1969-70 Cougar and Mustangs. Mounts under the cowl cover at the windshield. Ford part # C9ZZ-17496-A.

Price: $53.49

Buy Details

Availability: In-Stock Item
Item #: 41900 -

Metal-stamped 1968 - 1970 Lower Radiator Mounting Brackets feature exact detail and proper fit. Painted dull black. Sold in Pairs. Rubber insulators not included. Replaces Ford part # C8ZZ-8052-A. Check out our video on Radiator and Fan upgrades below: ...