Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4657-4704 of 5109
$0 Price: $127.89

Buy Details

Availability: Out of Stock, On Order
Item #: 11982 -

This is the electrical portion of the new for 1970, locking column mounted switch. This is the rod actuated device mounted on the top of your column under the plastic collar cover. See page 33-02-06 of your 1970 shop manual for proper installation and adjustment. Working, used ignition switch. This is only the electrical side, the mechanical key and lock section is not included. These are tested and repaired as necessary by our Electrical Dept. Ford part number D0AZ-11572-A. While there's...

$0 Price: $88.88

Buy Details

Availability: Out of Stock
Item #: 24431 -

C8OZ-3C511-B Rear power steering pump support bracket. Also called the high pressure hose indexing bracket. For any 1968 - 1970 Cougar or Mustang with any of the 390 / 427 / 428CJ engines. OEM used part designed to maintain the position of the high pressure power steering hose from coming in contact with with moving or high heat parts. *Note - May or may not work with non-original or replacement high pressure hoses.

$0 Price: $440.87

Buy Details

Availability: Out of Stock
Item #: 25420 -

Ultra rare item, subject to availability. Call about spent cylinders, we actively seek out those too. Our guess is that the contents of an NOS cylinder may be unstable for use after nearly 40 years.

$0 Price: $29.15

Buy Details

Availability: Out of Stock
Item #: 20152 -

Universal driver side (left hand) or passenger side (right hand) inner floor frame patch that you can trim to fit the area that needs to be repaired.

$0 Price: $100.05

Buy Details

Availability: Out of Stock
Item #: 42393 -

Full passenger (right hand) side front frame rail that measures 52" long. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $90.86

Buy Details

Availability: Out of Stock, On Order
Item #: 11150 -

1970 Mercury Cougar standard and Eliminator rimblow horn pad bezel with hand painted woodgrain. These have been painstakingly hand painted by a local artist. 1971-74 standard and 1971-74 XR7 straight style woodgrain. Cores cannot be bent or rusted heavily. Does not include the 'kitty', Cougar Emblem sold separately. Core charge is refundable when restorable 1970 woodgrain insert is received by WCCC. Check out this video ...

$0 Price: $90.86

Buy Details

Availability: Out of Stock, On Order
Item #: 41946 -

1970 Mercury Cougar XR7 rimblow horn pad bezel with hand painted burl woodgrain. These have been painstakingly hand painted by a local artist. 1970 XR7 burl woodgrain.  Does not include the 'kitty', Cougar Emblem sold separately. Cores cannot be bent or rusted heavily. Core charge is refundable when restorable 1970 burl insert is received by WCCC.Check out this video ...

$0 Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 16-0050 -

Grade A used inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch. This is a real clean rust free cover but if you are wanting to save money, we have grade B's which will have a dent or creases for about half the price. Find the grade B here.Ford part number C3AZ-6366-A. ...

$0 Price: $44.87

Buy Details

Availability: Out of Stock
Item #: 25816 -

D0ZZ-5493-A Rear sway bar bushing with 1/2" diameter opening. Used on rear anti-sway bar on the 1970 Eliminator and 70 - 73 models ordered with the competition handling package. Casting number as seen on the bushing is D0ZA-5484-E. Sold individually.

$0 Price: $950.00

Buy Details

Availability: Out of Stock
Item #: 33667 -

Lightly used intake manifold cast aluminum 427-4V medium riser. Blue Thunder casting 427MR-4V. Has the oil fill tube in front, dual plane, and the road draft provision in the back. Very tall manifold, likely to not fit under the stock hood of a Cougar or Mustang. Do your research on this, if you know, you know. We don't. Small portion on the driver side front has been lightly ground down, likely for a coil. No other issues noted. 

$0 Price: $930.87

Buy Details

Availability: Out of Stock
Item #: 25183 -

D0ZE-9425-E Cast aluminum intake manifold used on all 1970 G code Boss 302 engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of D0ZE-9425-E . Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C9ZZ-9424-D or -E.

$0 Price: $2,500.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: LeatherUpholsteryKits -

AS OF NOW, NONE OF OUR SUPPLIERS ARE MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Unfortunately all of the manufacturers of the Leather Upholstery Kits have stopped producing them. Most customers are happy with the Vinyl kits that we offer.

$0 Price: $1,725.49

Buy Details

Availability: Out of Stock
Item #: 15102 -

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium green for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because...

MSRP:$426.94
$426.94 Price: $305.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: 33888 -

A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.               ...

$0 Price: $870.91

Buy Details

Availability: Out of Stock
Item #: 15065 -

Upholstery components have an ETA of 10 - 12 weeks. A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 6 - 8 weeks for delivery.               ...

MSRP:$877.44
$877.44 Price: $626.75

Buy Details

Availability: Out of Stock, Discontinued
Item #: 33887 -

Door Tag Trim Code: 6A. Black XR7 Vinyl Upholstery kit to cover the rear seat for the convertible.

$0 Price: $18.25

Buy Details

Availability: Out of Stock
Item #: 20160 -

Reproduction intermediate pipe exhaust bracket for the 67 - 70 Cougar or Mustang. Used on big block vehicles equipped with the transverse muffler. Attaches to the resonator exhaust hangers just before the muffler pipe rises above the rear end. Sold individually, 2 required per car.

$0 Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 31562 -

Used intermediate pipe exhaust bracket for the 67 - 70 Cougar or Mustang. Used on big block vehicles equipped with the transverse muffler. Attaches to the resonator exhaust hangers just before the muffler pipe rises above the rear end. Sold individually, 2 required per car.

$0 Price: $77.85

Buy Details

Availability: Out of Stock
Item #: 32781 -

NOS Key reminder buzzer for 1970-71 Mercury Cougar and Ford Mustang. Also used on 1970-72 Lincoln MKIII and Thunderbird. Can also be stamped DOAB-13150-B, DOAB-13150-E, and DOAB-13150-F. Ford master part number D0AZ-13150-E. NOTE: This buzzer is for ignition key reminder with two posts. The four post ignition / headlight buzzer can be found here. Click on images to enlarge. ...

$0 Price: $358.88

Buy Details

Availability: Out of Stock
Item #: 16-0061 -

This rod is correct for the 428 CJ / SCJ with a C6 and is approximately 28".

$0 Price: $110.57

Buy Details

Availability: Out of Stock, Discontinued
Item #: 19593 -

Exact reproduction of this one year only rod is correct for the 351 Cleveland 4V and is approximately 27". This rod originally had a light blue paint daub near the carburetor. It is a little longer than the 2V rod and connects to the carburetor at a slightly higher point. This reproduction rod is made from stainless steel and weighs slightly more than the original. Replaces Ford Part #: D0OZ-7A187-C

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 19416 -

Very nice knob with no missing / lifting chrome. If you don't mind some damage on your knob we have plenty that are less than perfect, mention it and we will give you one for free with your order.

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 25073 -

Used wiper control knob for lower dash. Plastic knob, will show some minor wear. Ford part number D0OZ-17513-A.

$0 Price: $65.88

Buy Details

Availability: Out of Stock
Item #: 10364 -

This is the factory Ford remote trunk latch as used on luxury cars such as Thunderbird or Lincoln. As you can see from the photo, they are made (and install) exactly like our Cougar trunk latches, but with the addition of a release tab. These can be installed to use either a cable, vacuum, or solenoid release.

$0 Price: $12.30

Buy Details

Availability: Out of Stock
Item #: 12480 -

The 1967 Cougar was Mercury's attempt to enter the Pony Car market segment popularized by the April 1964 introduction of Ford's Mustang. Introduced in the fall of 1966 for the 1967 model year, the first-year 1967 Cougar exceeded all sales expectations with 150,893 units sold. It was selected as Motor Trend's 1967 Car of the Year. Legendary Cougar Magazine is dedicated to the first three generations of Mercury's luxury Pony Car. Each bi-monthly issue includes features on the first-generation...

$0 Price: $31.86

Buy Details

Availability: Out of Stock
Item #: 65665 -

Grade "B" used backup light lens for passenger side 1969 - 70 Cougars. This lens will show some wear, and will also have a few minor cracks and scratches. Cracks inside the plastic from stress, not contact. Ford part number: C9WY-15514-A

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 31123 -

Used fuel door lens for the 69 - 70 Mercury Cougar. This part will have minor chips and stress cracks under the trim but nothing that shows when installed. Ford part number C9WB-13A568-B

$0 Price: $25.97

Buy Details

Availability: Out of Stock
Item #: 10841 -

Good used map light lens, for either of the metal backed map lights with or without the switch. C9WY-15A650-B or C9WY-15A650-A, map light assemblies.

$0 Price: $219.87

Buy Details

Availability: Out of Stock
Item #: 12836 -

NOS driver side (right hand) taillight lens for any 1969-70 Mercury Cougar. Ford part # C9WY-13451-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. Thinking about adding some LED taillight bulbs to your...

$0 Price: $22.86

Buy Details

Availability: Out of Stock
Item #: 31725 -

Used Carter fuel pump lever. From Carter made fuel pump as installed on Ford 352, 390, 410, 427, 428CJ FE engines. Many of the Carter "X" fuel pumps with screw together rebuildable pumps often times have Ford small block levers. Housings are he same. Levers are removable, see youtube for the rebuilding and assembly procedure.

$0 Price: $12.75

Buy Details

Availability: Out of Stock
Item #: 26874 -

Reproduction license plate frame for your Mercury Cougar.  Sold individually. Note: These will not clear on the rear pull down fuel door on the 1967- 1968, so they will only work for the front license plate on the 67-68 Cougar. These can be used for front or back on the 69-73 Cougar.Check out this video of our 2013 Open House event. Se you next year! ...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 31871 -

Pair of reproduction license plate frames bearing the name of the the original Lincoln / Mercury dealer lot in San Jose, California.  Chrome with the city and dealer name written in/on reflective material. Sold only as a pair.

$0 Price: $29.88

Buy Details

Availability: Out of Stock
Item #: 24713 -

Lamp housing with original glass lens, wiring pigtail with integral rubber body plug. Driver quality part. #97 Bulb available. We often find damaged wires with these lights left on our rear bumper cores. Guaranteed to work with no cuts or splices. Specified as a Cougar part in the Master Parts Catalog, but the wiring harness has imprinted on it C9ZB-13412-A. However, it is unknown whether or not it fits the Mustang.

$0 Price: $152.87

Buy Details

Availability: Out of Stock
Item #: 27412 -

This lid is about 16-3/4 inch in diameter. Identified by the spokes in the stamping. 1967 and 1969 Mercury Cougar and Ford Mustang with S code 390-4V engines. Additionally this lid was used on 1969-70 Q code 428CJ or non-ram air Cougars and Mustangs. We believe that this lid was also found on Boss 302 Eliminators. This was originally a chromed lid, plating will usually be poor or missing on these used units. Plan on sending to the chrome plating company prior to use. Ford part number...

$0 Price: $240.03

Buy Details

Availability: In-Stock Item
Item #: 30827 -

Rechromed GT air cleaner lid for the Mercury Cougar and Ford Mustang equipped with either the Boss 302, GT 390, or 428 CJ engine without the shaker option. It was possible to order a 390 GT motor for your Cougar without ordering the 390 GT package. Cougars equipped with the S code 390 6.5 Litre engine, that did not come with the GT package, would have used the painted air cleaner lid. Replaces Ford part # C7OZ-9661-A.*NOTE* The outside dimension of the lid is 16.75 inches and will not fit the...

$0 Price: $1,418.27

Buy Details

Availability: Out of Stock
Item #: 24772 -

This is a 1969 lid. The 1968 lid had several differences, most notable was the stamping wrinkles. This is  Flapper mid plate for use on non-shaker cars. 1969-70 Mercury Cougar with R or Q code engine with ram air. 1969 Mercury mid sized cars such as Montego, and Cyclone all with R code 428CJ or SCJ engines. Ford part number C9ZA-9600-C. This version is said to have been used starting in May of 1968, so there would have been some cars equipped with this mid plate.There are many...

$0 Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 25135 -

This engine compartment lamp assembly includes lamp socket, bracket, mercury switch, and length of wire. Replaces part # D0WY-15702-A

$0 Price: $45.85

Buy Details

Availability: Out of Stock
Item #: 33147 -

NOS glove box light switch for the 69 - 70 Cougar or the 69 - 73 Mustang.

$0 Price: $435.87

Buy Details

Availability: Out of Stock
Item #: 16-0078 -

This very rare part is unique to the 1970 - 1971 CJ and SCJ C6. There was no 390 option in 1970 - 71. Sales were down on the CJ equipped Cougars in 70-71 making this one very hard part to obtain.  We have determined that this part only fits Mercury Cougar and Ford Mustang. Torino and mid sized Ford/Mercury use a different numbered part. Marked D0ZP-D. Ford Part #: D0ZZ-7A256-D. Check out our video on rebuilding your shifter below: ...

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 15-0201 -

Used tumbler linkage arm that connects to the to ignition switch on your 1970 Cougar or Mustang equipped with a tilt column.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$19.85 Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 15-0122 -

Steering column locking gear. For all 1970-73 Ford and Mercury steering columns. Made of brass, has 8 teeth and is 7/16 inches thick. Fits fixed and tilt steering columns. Ford part number D0AZ-3E717-A.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $259.88

Buy Details

Availability: Out of Stock
Item #: 25165 -

Rod used for locking the 4 speed manual transmission in "Reverse". Connects to the lower tab of the steering column and the reverse control transmission lever shift arm. Prevents the transmission from shifting out of reverse when the ignition key is removed. Rod is about 15-1/2 inches long. The 4 speed manual transmission, could be ordered on any 1970 Cougar or Mustang regardless of engine. Transmission code "5" or "6" on your door data tag. Ford part number D0ZZ-7E330-S. *Trivia - Starting in...

$0 Price: $198.86

Buy Details

Availability: Out of Stock
Item #: 16-0040 -

Rod used for locking the 4 speed manual transmission in "Reverse". Connects to the lower tab of the steering column and the reverse control transmission lever shift arm. Prevents the transmission from shifting out of reverse when the ignition key is removed. Rod is about 15-1/2 inches long. The 4 speed manual transmission, could be ordered on any 1970 Cougar or Mustang regardless of engine (except Boss 429). Transmission code "5" or "6" on your door data tag. Ford part number D0ZZ-7E330-C....

$0 Price: $119.57

Buy Details

Availability: Out of Stock
Item #: 31282 -

Reproduction locking pawl for the 1970 - 1979 Mercury Cougar or Ford Mustang that is equipped with a factory tilt steering column. This unit works in conjunction with a pin and is responsible for locking the tilt column in place. In many cases, the pin tends to move out of place and break or chip the teeth of the locking pawl. We have found that 3 of 4 tilt columns that we have disassembled have locking pawls with broken or chipped teeth.  Replaces Ford part # D0AZ-3B661-A. *NOTE*...