Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3697-3744 of 5109
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10836 -

Reproduction 8-32 x 1/2" stud used to attach the convertible boot mouldings on any 69-73 Cougar or 65-73 Mustang. A number of these studs were installed on the mouldings, going through the body of the car and attached underneath the sheet metal using the boot nuts.

$0 Price: $0.45

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19482 -

These studs attached the taillight housing to the tail panel of a 1969-70 Cougar. 6 used per taillight, 12 required per car. Sold individually.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 31171 -

Exhaust manifold bolt / stud for mounting the heat shield on the passenger side. This is the longer of the two stud bolts. See item 41350 for the short heat shield bolt. For all Mercury Cougar or Ford Mustang, Torino, Cyclone, etc. with Q or R code 428 cobra Jet engines with factory cast iron exhaust manifolds. We also sell the complete bolt kit for the CJ exhaust manifolds. 382803-S

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 41350 -

Exhaust manifold bolt / stud for mounting the heat shield on the passenger side. This is the shorter of the two stud bolts. See item 31171 for the short heat shield bolt. For all Mercury Cougar or Ford Mustang, Torino, Cyclone, etc. with Q or R code 428 cobra Jet engines with factory cast iron exhaust manifolds. We also sell the complete bolt kit for the CJ exhaust manifolds. 

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13067 -

Used stud and nut for inserting and attaching to used or reproduction side marker lenses. Red or amber lenses.

$0 Price: $34.09

Buy Details

Availability: In-Stock Item
Item #: 41943 -

This kit mounts the spoiler pedestals to the trunk lid. Studs measure 2-3/4" long, correct for the Concours correct stands.Some economy or generic kits come with 1-1/2" studs

$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 30657 -

Reproduction mounting studs for the side marker light lenses on 1970 Cougars and Mustangs. 2 required per light, 8 per car.Sold as a pair.

$0 Price: $25.20

Buy Details

Availability: In-Stock Item
Item #: 41274 -

Reproduction studs and nuts for the taillight to body on the 1969 - 1970 Mercury Cougar 

$0 Price: $34.65

Buy Details

Availability: In-Stock Item
Item #: 26237 -

Reproduction chrome center cap with blue background and chrome Mercury man logo for the Mercury Cougar. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the...

$0 Price: $39.45

Buy Details

Availability: In-Stock Item
Item #: 26245 -

Reproduction chrome center cap with red background and chrome Mercury man logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from...

$0 Price: $37.55

Buy Details

Availability: In-Stock Item
Item #: 26241 -

Reproduction chrome center cap with red background and chrome walking cat logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing, we recommend a good...

$0 Price: $313.13

Buy Details

Availability: In-Stock Item
Item #: 33829 -

Pair of reproduction sub frame connectors, designed to tuck up against the floor pan as tightly as possible to maximize ground clearance. The more performance improvements you do to the vehicle, the more demands are put on the uni-body. Sub frame connectors provide resistance to chassis flex, therefore increasing the integrity and rigidity of the chassis. Installing them will also help reduce rattles and squeaks from the car flexing over rough roads.They are a must for any performance...

$0 Price: $181.75

Buy Details

Availability: In-Stock Item
Item #: 27131 -

Excellent quality reproduction sun visor assemblies and corner trim for the convertible 1969 - 1970 Mercury Cougar or Ford Mustang. These feature the correct satin finish, fit perfect and look spot on. Sold as a pair, the original passenger side part has a C9ZB-7604122-C casting number on the back side and the driver side reads C9ZB-7604123-C. These will also interchange with versions ending in A B or D. Later versions will show one less screw tab. Replaces Ford part # C9ZZ-7604144 /...

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33394 -

Grade B used convertible sun visor bracket assembly for the driver side of any 1969-70 Mercury Cougar or Ford Mustang. Grade B will have some pitting in the pot metal. Sanding and painting will be required for the best results.  These will almost always, show some wear in the pocket, where the hook attaches.Ford casting number C9ZB-7604123.

$0 Price: $49.85

Buy Details

Availability: Out of Stock
Item #: 33395 -

Grade B used convertible sun visor bracket assembly for the passenger side of any 1969-70 Mercury Cougar or Ford Mustang. Grade B will have some pitting in the pot metal. Sanding and painting will be required for the best results.  These will almost always, show some wear in the pocket, where the hook attaches.Ford casting number C9ZB-7604122.

$0 Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10750 -

Used single hole front mount center visor bracket for the 1969 / 1970 Mercury Cougar and Ford Mustang hard tops.  The colors don't always match the seat color, so plan on spraying these with vinyl paint to match your interior. We often times can supply your desired color, mention your desired color in the 'comments' section of your order. Ford part # C9AZ-6204132, casting # C9AB-6204132-B.

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 10749 -

Used 2 hole front mount center bracket for the sun visors in the 69 - 70 Mercury Cougar or 68 - 70 Ford Mustang convertible. The Master Parts Catalog (MPC) shows a specific part for the convertibles, but we have found three different styles of the sun visor arm clips used in the 68 - 70 convertibles.  Casting# C8OB-6304132-A has no dividerCasting# C8ZB-6504132-A has a partial divider (Most Common)Casting# C8ZB-6504132-B has a complete divider.  The colors don't always...

$0 Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 13809 -

This is the 1968 coupe version of the 2 hole front mounting sun visor center bracket and is a close match for the 1968 / 1969 / 1970 convertible sun visor bracket.  This bracket is not, however, an exact match for 1971 /1972 / 1973 convertible as some sites suggest, but it will work. On the 71 - 73, the hole spacing and distance from the windshield are identical to this bracket, but the bracket is not the same size. This bracket is 1/8" longer on the...

MSRP:$22.00
$22.00 Price: $12.75

Buy Details

Availability: In-Stock Item
Item #: 13783 -

Reproduction single hole front mount center visor bracket for the 1969 and 1970 Mercury Cougar or Ford Mustang. This is a decent reproduction, but not quite as nice as the originals. Reproductions only come in 'paint to suit' black but we have most original colors in used. Replaces Ford Part #: C9AZ-6204132.

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31929 -

For the purists out there we have a very limited amount of used visors that have no impressions, seam separation and minimal rust on the clips if any. Convertible and Coupe are the same.Please indicate the color desired and we will try to accommodate but painting might be required.Sold individually

$0 Price: $100.07

Buy Details

Availability: In-Stock Item
Item #: 69_Vinyl_Sun_Visors -

Reproduction sun visors that are fully padded and covered with the correct textured vinyl to match the seats. These units are sold as a pair.

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19609 -

Used Driver Side Grade "A" Center Grille Support for the 1970 Mercury Cougar

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19610 -

Used Driver Side Grade "B" Center Grille Support for the 1970 Mercury Cougar

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19611 -

Used Passenger Side Grade "A" Center Grille Support for the 1970 Mercury Cougar

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19612 -

Used Passenger Side Grade "B" Center Grille Support for the 1970 Mercury Cougar

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10834 -

Support brace between the cowl top and the brake pedal support bracket. Fits 1969-70 Mercury Cougar and Ford Mustang with either automatic or manual transmissions, drum or disc brakes. Ford part number C9ZB-6501554.

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10833 -

Support brace between the cowl and the top of the brake pedal support bracket. Fits 1970 Mercury Cougar and Ford Mustang with either automatic or manual transmissions, drum or disc brakes. Overall width is right at 5-1/2 inches on the 1970, larger than the 1969 version. Ford part number D0ZB-65015A18-A.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19533 -

This tubular support gives rigidity to your hood extension which houses your center grille. These are hard to find with no bends or cracks due to the fact that the 1970 hood protrudes in the center.1 required per car.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25224 -

Used brake pedal support bracket for the Mercury Cougar or Ford Mustang equipped with manual drum front brakes. If you have a manual transmission car with worn out clutch bushings, this is a great replacement part for you as it will have been removed from an automatic transmission equipped car. This means the clutch bushings will be in mint and unused condition. Ford part # D0ZZ-6501508-A. *NOTE* Manual brake supports are different. Manual brake supports have four threaded nuts swedged to the...

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25225 -

D0ZZ-6501508-B This is the correct hanger for a 1970 Mercury Cougar or Ford Mustang with power disc brakes. If you have a manual transmission car with worn out clutch bushings this is a great replacement part for you as it will have been removed from an automatic transmission equipped car which means the clutch bushings will be in mint, unused condition. Ford master part number D0ZZ-6501508-B for power disc brakes. *Note - Power brake and manual brake supports are different. Power brake...

$0 Price: $70.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19531 -

Reproduction brake pedal hanger also known as brake pedal support for Mercury Cougar and Ford Mustang.

$0 Price: $28.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11620 -

Used upper support bracket for the hood latch on any 1970 Mercury Cougar. This 1970 part will work on a 1969. The only difference is the top corner is clipped at an angle on the 1970.Ford part number D0WY-16707-A.

$0 Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33444 -

Used lateral or side bracket for mounting the steering column to the instrument panel on any 1970-71 Mercury Cougar or Ford Mustang. Support bracket only, there is also a large support bracket that is also needed. Tilt and fixed steering columns.Bracket also used on 1970 full sized Ford and Mercury cars, and 1970-71 Ford Maverick.  Ford part number D0ZZ-3B139-A.

$0 Price: $1.55

Buy Details

Availability: In-Stock Item
Item #: 26530 -

Fills the hole in the core support where the A/C lines pass through to the condenser. Replaces part # C9ZZ-19819.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 30515 -

Pair of reproduction cowl vent panel support pads. These pads help prevent the upper cowl cover from flexing. 

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24142 -

This is the Left hand or driver side spring that holds the rear license plate or fuel door in the upright position. Fits all years of Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-B

$0 Price: $17.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32695 -

This is the spring that holds the rear license plate or fuel door in the upright position. Fits 1969-70 Cougar.Ford Part #: C9WY-13455-A

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19453 -

Good aluminum piece that has no corrosion, no dings and all six mounting studs will be firmly in place. This same bezel was used on all Standard, XR7 or Eliminator Cougars for 1969 and 1970. Obviously the clock hole was not utilized on the Standard Cougar.

$0 Price: FREE

Buy Details

Availability: Download
Item #: 33850 -

Here is our free 7MB download for the 1967 - 1972 Mercury Cougar suspension diagram.

$0 Price: $34.97

Buy Details

Availability: In-Stock Item
Item #: 61616 -

Reproduction sway bar clamp and bushing set for 3/4" sway bars on 1967 - 1973 Cougars and Mustangs.  These polyurethane bushings reduce deflection at the bar mounts to quicken the action of stock or aftermarket sway bars, and come with matching mount brackets. Includes lubrication groove to prevent squeaking. Replaces Ford Part #: C5ZZ-5486-H

$0 Price: $257.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 10023 -

DOES NOT FIT BIG BLOCK Reproduction 1 1/8" sway bar for 1967 - 1970 Cougars and Mustangs. End link and bushing kit is included.

$0 Price: $222.17

Buy Details

Availability: Out of Stock
Item #: 10024 -

Reproduction big block 1" sway bar for 1967 - 1970 Cougars and Mustangs. Keep in mind that this sway bar does not come with mounting brackets or the end link kit.  

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25218 -

D0ZZ-5482-B Factory used front sway bar found on most 1970 Cougars. 3/4 inch in diameter. This factory used front sway bar, does not include mounting anybrackets or end link kits.

$0 Price: $36.45-$43.64

Buy Details

Availability: In-Stock Item
Item #: Black_Hooded_Pullover -

Now in black with no zipper, our comfy WCCC hoodie features bold new walking cat graphics on front and back. Perfect for staying warm in the garage, or out and about with your Cougar! This sweatshirt is made with soft, mid weight fleece and generous fit for comfort. Features a jersey lined hood, heavy gauge drawcord with metal eyelets and 1x1 ribbing at cuffs and waistband. 8.5 oz fleece80% cotton 20% polyester blend100% cotton 20 singles face yarnSplit stitch double needle sewing on all...

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: Gray_Hooded_Pullover -

Now in grey with no zipper, our comfy WCCC hoodie features bold new walking cat graphics on front and back. Perfect for staying warm in the garage, or out and about with your Cougar! This sweatshirt is made with soft, mid weight fleece and generous fit for comfort. Features a jersey lined hood, heavy gauge drawcord with metal eyelets and 1x1 ribbing at cuffs and waistband. 8.5 oz fleece80% cotton 20% polyester blend100% cotton 20 singles face yarnSplit stitch double needle sewing on all...

$0 Price: $40.00-$44.55

Buy Details

Availability: In-Stock Item
Item #: Team_Cougar_Quarter_Zip -

This sporty quarter-zip sweatshirt features a Mercury man on the front left chest, "Mercury" script down the right arm, and a Team Cougar logo on the back. A cool tribute to the winning 1967 Trans Am team, and a great way to represent the brand while staying warm. 8.0 oz., pre-shrunk 50/50 cotton/polyester1x1 athletic rib with spandexBrass zipper and dark grey trimSelf fabric lined collarSatin labelDouble needle stitching at waistband and cuffsQuarter-turned ...

$0 Price: $134.85

Buy Details

Availability: Rare / NOS Part
Item #: 32747 -

This A/C fan switch mounts to the rear of the factory installed air conditioning ventilation control panel. NOS, new old stock part. Save your knobs or consider purchasing the 1969-73 selector button kit. Click this LINK for those little beauties.Ford part # C9ZZ-19986-A.