Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4417-4464 of 5117
Price: $248.85

Buy Details

Availability: Out of Stock
Item #: 25145 -

Select 1970 M-code 351-4V engines and FMX transmission.Shaft diameter 3-1/2 inches. Length 53-9/16 inches, measured on U-joint centers. Used and 'as balanced' from the factory. Not a common part, currently out of stock.Ask about slip yokes. Shipping is oversized due to length.

Price: $523.15

Buy Details

Availability: Out of Stock, Discontinued
Item #: 31355 -

Supplier is not making drive lines at this time, we will update our site when available again. Reproduction one piece drive shaft for the 1967 - 1973 Mercury Cougar. Includes slip yoke and U Joints. Keep in mind that this repro drive shaft will only work on stock configuration cars. If the engine has been swapped, if you've had a different rear end installed etc., these drive shafts will not work. When ordering, be sure to specify (in the notes section) the year of your car, engine size...

Price: $20.05

Buy Details

Availability: Out of Stock
Item #: 11784 -

Reproduction power steering drop bracket for the Mercury Cougar or Ford Mustang. One must use this part when installing headers with power steering.  Because of the way this bracket hangs down, it will get bumped and bumped hard in time. Becasue of this we recommend considerning our premuim version of this bracket, as it is substantially stronger.

Price: $799.88

Buy Details

Availability: Out of Stock
Item #: 13609 -

This kit was sold by Ford Service Departments back in the day for those who were tired of their manual drum brakes. This kit includes all you will need to convert your six cylinder Mustang or V8 Cougar / Mustang from manual to power drum brakes. Technically it is correct only for a 1968 but will work on any year 67-70. The conversion carries a Ford part number of C8ZZ-2A091-A. Ford was generous and gave you both a manual transmission and a automatic transmission brake pedal in the kit. When...

Price: $43.07

Buy Details

Availability: Out of Stock, On Order
Item #: 11-0052 -

C9ZA-18C366-A lower heater duct to floor outlet for Cougars or Mustangs without air conditioning. Used grade "B" part that will have more than one minor defect. It will have a small crack and possibly a broken or missing tab. Almost half the price of the grade "A" piece and works awesome if you don't have one at all. Want to have directed heating, we've got you covered.

Price: $49.15

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10083 -

These is the correct driver side backing plate (sometimes called a splash shield) for 1968 - 1973 Cougars and Mustangs. Sold individually by side, each plate comes with the backing plate retainer. No other hardware is included. Although these plates fit the 68, they're cosmetically different in that 68 did not have cooling scoops.

Price: $49.15

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10080 -

These is the correct passenger side backing plate (sometimes called a splash shield) for 1968 - 1973 Cougars and Mustangs. Sold individually by side, each plate comes with the backing plate retainer. No other hardware is included.Although these plates fit the 68, they're cosmetically different in that 68 did not have cooling scoops.

Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 24380 -

Correct cast aluminum elbow fitting for the rear of the C8AZ-9A486-C smog pump. This elbow will have two single mounting holes. The service replacement elbow (Ford part number D4TZ-9C475-A) has two sets of double mounting holes. Correct Ford part number C8AZ-9C475-A.

Price: $48.35

Buy Details

Availability: Out of Stock
Item #: 41705 -

Concourse correct 351 2bbl engine heater hose connector with a 90?� degree elbow that attaches to the intake manifold. Product discontinued by manufacturer. Know anyone else reproducing these? Let us know!

Price: $51.75

Buy Details

Availability: Out of Stock
Item #: 41706 -

Concourse correct 90 degree heater hose elbow that attaches to the intake manifold and provides proper clearance for the emissions canister and air cleaner housing. Correct for all Boss 302 and 428CJ engines 1969-70.Ford number C9ZZ-18599-A.

Price: $48.87

Buy Details

Availability: Out of Stock
Item #: 41756 -

These were obtained from the original manufacturer and have never been mounted. Very rare find!

Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 41770 -

Rare find in NOS form! 1969 standard model Cougar, passenger side dash plate. Replaces Ford part number C9WB-6504460-A.

Price: $42.89

Buy Details

Availability: Out of Stock
Item #: 20212 -

Due to the fact these were glued on, they are often missing. Separate "XR" and "7", Grade B used, good for a daily driver. We often get asked about where to place 69-70 XR7 and Cougar adhesive emblems. Based on personal experience and pictures from the original Ford archives the answer would be "Pretty much wherever you think looks best". Often as seen in this picture the line workers did not even attempt to get them very well centered. Both emblems were placed on the RH side of the deck lid...

Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30285 -

Will show at least a small amount of pitting. Casting number as seen on the back reads D0WB-652803-E.

Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 42370 -

Original part in Ford box, part number C9WB-16098-A, casting number as seen on back is C9WB-16098-B

Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 31820 -

NOS front fender extension "Cougar" script. Ford Engineering number as found on the backside:  Ford number C9WB-16098-B. 

Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 31819 -

NOS front fender extension "Cougar" script. Ford Engineering number as found on the backside: Ford number D0WB-16098-A . 

Price: $281.88

Buy Details

Availability: Out of Stock
Item #: 42372 -

This version of the emblem was actually used on early 70's full-size Mercurys, and is almost identical to the 1969-70 version used on Cougars. In order to use it on a Cougar fuel door, the studs on the back will need to be trimmed down The only visible difference is the thinner / more numerous ridge lines in the red crest area than on the Cougar version. Casting number on this substitute emblem is D1GB-16607-AA.The original emblems were never sold as a stand alone part from Ford but rather an...

Price: $54.55

Buy Details

Availability: Out of Stock, On Order
Item #: 12163 -

These fuel door Mercury crest emblems are a close to original reproduction. They are an economical alternative to brighten up the looks of the rear of your 1969 - 1970 Cougar. This crest was used on all models except the 1970 Eliminator. To remove your emblem we suggest grinding down the studs on the backside. To install the reproduction emblem you will need the 26120 trim clip.

Price: $124.85

Buy Details

Availability: Out of Stock
Item #: 25126 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 11880 -

Faded but good used emblem with aluminum foil background. If you push on the swedged aluminum studs from the backside these will easily remove. The standard grill emblem with a walking cat uses the same stud configuration as XR7 so you can exchange emblems from one to another.

Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 42371 -

Very difficult to find, delicate aluminum quarter panel emblem in the original Ford box. Ford part number is C9WB-6525622-A, casting number on back reads C9WB-65291B62-AYou can reference the above pictures for correct dimensions, as taken from one of our cars using an original script emblem. Measurements are from the rear and lower body lines.

Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 20373 -

This little emblem was used only on the two spoke steering wheels from 1969 - 1973. We can pretty much guarantee one if not both of the two mounting studs will be broken but because of the way it fits into the recess of the steering wheel pad, gluing it into place is not a problem. We rarely have an emblem this nice in stock for more than a few weeks of any one year as the tail was prone to breaking off as well as the "cats" other limbs. We do not list these hard to find parts here to...

Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 19509 -

This little emblem was used only on the two spoke steering wheels from 1969 - 1973. We can pretty much guarantee one if not both of the two mounting studs will be broken but because of the way it fits into the recess of the steering wheel pad, gluing it into place is not a problem. The tail will always be broken and probably at least one leg is missing on this grade B part. While not an exact fit our 3 spoke wheel emblem cat will fit on this black background.

MSRP:$55.00
Price: $41.85

Buy Details

Availability: Out of Stock
Item #: 20647 -

This is one of the smallest "Cougar" emblems ever put on a Mercury Cougar. Only the 70-73 two spoke cat and xr7-G shift handle Cougar was smaller. It is also the most delicate! Very unusual to find the tail and all limbs intact on this fragile little kitty. Silver spray paint will make this cat look new again, they did not have a chrome finish from the factory. Now that we have reproduced this emblem there is little incentive to purchase this over-priced used emblem.

Price: $109.15

Buy Details

Availability: Out of Stock, On Order
Item #: 32446 -

COMING SOON Beautiful reproduction C pillar emblem for the 69 - 70 Cougar XR7. This part is also known as the shield or outside roof side ornament. The attention to detail on this exact copy is really impressive. Kudos to Daniel Carpenter Mustang for providing yet another outstanding part. Sold individually, 2 required per car. No core required. Replaces Ford part number: C9WB-65517A56-A Black plastic backer engineering number reads C9WB-65517C00-A Engineering number on back side of chrome...

Price: $171.86

Buy Details

Availability: Out of Stock
Item #: 24760 -

These two emblems were sold separate when ordered as a service replacement part. We sell them as a pair. Located on the passenger side of the trunk, these are a peel and stick with no mounting studs. Ford part # C9WY-6542532-A & C9WY-6542532-BWe often get asked about where to place 69-70 XR7 and Cougar adhesive emblems. Based on personal experience and pictures from the original Ford archives the answer would be "Pretty much wherever you think looks best". Often as seen in this picture the...

Price: $114.89

Buy Details

Availability: Out of Stock
Item #: 25210 -

Used emergency / parking brake assembly for the Mercury Cougar or Ford Mustang. The 1969 model used a T shaped chrome release handle and 1970 used a black plastic T shaped release knob. Seldom in stock, please check out the reproduction version.Ford part # D0ZZ-2780-A.

Price: $620.87

Buy Details

Availability: Out of Stock
Item #: 31511 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY.Used standard bore 4.00" Ford 351W engine block. Will be used, dirty, have measurable taper, and will have a ridge. Good for rebuild. Bare block, will have C9OE-6015 casting. Dated 9J23, September 23, 1969. Picture may show item with damaged oil pan and crank shaft and pistons. When we have them in stock we will post the casting date or dates. Heavy, will require...

Price: $12.55

Buy Details

Availability: Out of Stock
Item #: 14-0071 -

Chassis black aerosal paint for all 1967-73 Mercury Cougar and Ford Mustang engine compartments. High temperature (advertised up to 350°). Manufacturer boasts resistant to cracking and flaking, chemical resistant to gasoline and brake fluid (but don't let brake fluid accumulate). *NOTE* Chemicals can only ship UPS ground only. Please, no foreign orders or USPS shipping allowed.Check out our video below on chassis upgrades: ...

Price: $89.87

Buy Details

Availability: Out of Stock
Item #: 32408 -

Assembly line used engine lift hook. Passenger side 1969-70 with 428 Cobra Jet engines, including 428SCJ. Triangle shaped, with one single hole for the hook. Not stamped with number. Fits all 1968-70 Ford cars with either R code or Q code 428 engines. Cougar, Mustang, Cyclone, Torino, Talledega, Cobra, Fairlane, Montego, Ranchero etc. Attaches to the passenger side exhaust manifold. There is also a driver side engine lift hook, see related items. 

Price: $21.85

Buy Details

Availability: Out of Stock, On Order
Item #: 14-0050 -

New high temperature enamel for painting your block and underhood parts. So far, the best match has been the VHT brand, SP125 "Dark Ford Blue" paint (sometimes called "Ford Corporate Blue"). This enamel resists heat up to 550 degrees so it's a great paint to use on your engine. Dry to touch in 30 minutes and ready to handle in 1 hour. It's also resistant to all types of automotive fluid. Once you get this stuff on, it will not flake, crack or peel. ...

Price: $9.55

Buy Details

Availability: Out of Stock, On Order
Item #: 41567 -

Bushings for the clutch equalizer bar, ball pivot for 1967 through 1970 with big block engines only, sold as a pair. Replaces Ford Part #: C1AA-7543-A

Price: $24.55

Buy Details

Availability: Out of Stock, On Order
Item #: 26079 -

Reproduction Small Block Equalizer Mounting Kit for the 1967 - 1970 Mercury Cougar and Ford Mustang equipped with the 289 / 302 / 351. Includes stud. Also works for BOSS 302

Price: $182.88

Buy Details

Availability: Out of Stock
Item #: 25000 -

D0AE-9431-A 351-2V Cleveland, factory original cast iron exhaust manifold for driver side. At some point there may have been a D0AE-9431-F casting number used, which may be substituted as per the Master Parts Catalog. *351C-2V exhaust manifolds only match up to factory 2V intake manifold ports and some after-market aluminum intakes such as one offered by Edelbrock.

Price: $458.60

Buy Details

Availability: Out of Stock, Discontinued
Item #: 23371 -

351 Cleveland factory cast iron 2V exhaust manifold set, both correct right D0AE-9430-A, and left D0AE-9431-A side matching exhaust manifolds. At some point there may have been a D0AE-9431-F and D0AE-9430-F casting numbers used, which may be substituted as per the Master Parts Catalog.

Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 24998 -

D0AE-9430-A 351-2V Cleveland engine, factory original cast iron exhaust manifold for passenger side. At some point there may have been a D0AE-9430-F casting number used, which may be substituted as per the Master Parts Catalog. *351C-2V exhaust manifolds only match up to factory 2V intake manifold ports and some aftermarket aluminum intakes such as one offered by Edelbrock.

Price: $257.27

Buy Details

Availability: Out of Stock
Item #: 25001 -

D0AE-9431-B 351-4V Cleveland factory original cast iron exhaust manifold for driver side. At some point there may have been a D0AE-9431-F casting number used, which may be substituted as per the Master Parts Catalog. *351C-4V exhaust manifolds only match up to factory 4V intake manifold ports and some aftermarket aluminum intakes such as offered by Weiand and Edelbrock.

Price: $299.57

Buy Details

Availability: Out of Stock
Item #: 24602 -

C9OE-9430-B 351W factory original cast iron exhaust manifold for passenger side. For all 1969 and 1970 Windsor 351's. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay...

Price: $550.89

Buy Details

Availability: Out of Stock
Item #: 24403 -

C8OE-9431-B 428 Cobra Jet factory original cast iron exhaust manifold for driver side. For all 1969-1970 428CJ Cougars after 9/2/1968 build date.

Price: $853.88

Buy Details

Availability: Out of Stock
Item #: 24603 -

C9OE-9430-D 428 Cobra Jet factory original cast iron exhaust manifold for passenger side. *No spacer required.

Price: $800.01

Buy Details

Availability: Out of Stock
Item #: 24801 -

C9ZE-9431-A Factory original cast iron exhaust manifold for driver side. Correct for all Boss 302 Eliminators 1969 and 1970.

Price: $1,214.87

Buy Details

Availability: Out of Stock
Item #: 24800 -

C9ZE-9428-A Factory original cast iron exhaust manifold for passenger side. Correct for all Boss 302 Eliminators 1969 and 1970. Nice piece from a CA car, no damage or pitting.

Price: $31.85

Buy Details

Availability: Out of Stock
Item #: 41855 -

Exhaust Manifold Choke Stove Rebuild Kit for All Small Block and Big Block Engines 1967 - 1973. Includes Stainless Steel Mesh Filter Element and Choke Stove End Cap Fitting.

Price: $341.87

Buy Details

Availability: Out of Stock
Item #: 23373 -

351 Windsor factory cast iron exhaust manifold set, both a correct right C9OE-9430-B and left C9OE-9431-B side matching exhaust manifolds. Same manifolds used on all 351 Windsor engines in 1969 and 1970.  No extra charge to look for a date coded pair but no promise we can hit it spot on either.  

Price: $1,084.86

Buy Details

Availability: Out of Stock
Item #: 18978 -

428 Cobra Jet factory cast iron exhaust manifold set, both a correct right C9OE-9430-D and left C8OE-9431-B side matching exhaust manifolds. *Trivia: All 1970 428CJ's had Q engine codes. Ram air was optional and many had that option. Not sure? only way to tell for sure is with a report from Kevin Marti.

Price: $1,192.35

Buy Details

Availability: Out of Stock, Discontinued
Item #: 23766 -

Sold as a pair only, top quality reproductions with correct markings!

Price: $1,623.87

Buy Details

Availability: Out of Stock
Item #: 19821 -

Factory cast iron exhaust manifold set, both a correct right C9ZE-9428-A and left C9ZE-9431-A side matching exhaust manifolds. 1969 and 1970 Boss2 Eliminators