Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2641-2688 of 5109
$0 Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 15688 -

This reproduction Bendix spacer bracket is mounted to the rear of the brake booster on the 69 - 70 Cougar and Mustang. These spacer brackets sometimes come up missing from some booster rebuilders. If you get a booster that has a piece of plate steel and spacers in place of this stamped steel bracket it is a go around (homemade). This plate differs from original in that the holes are smaller than factory so they will need to be enlarged and there is no relief spacing for the input rod dust boot...

$0 Price: $72.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24428 -

Driver side caliper mounting bracket, also called a caliper anchor bracket in the Ford Master Catalog. Ford Part Number C8OZ-2B293-A Check out this video Check out our caliper tips and tricks video below: ...

$0 Price: $72.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24427 -

Passenger side caliper mounting bracket, also called a caliper anchor bracket in the Ford Master Catalog. Ford part # C8OZ-2B292-A Check out this video Check out our caliper tips and tricks video below: ...

$0 Price: $8.01

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25156 -

D0WY-9A225-A "L" shaped mounting bracket for the rear evaporative vapor separator, mounts in the drivers side trunk well. *Note - This is only a small part of the 9B004 assembly.

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31320 -

This aluminum ninety degree bracket is what fastens the XR7 chrome boot moulding to the quarter panel. The beltline weatherstip also attaches to it. This part is only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass, whereas the XR7 diecast trim goes all the way to the door jamb. You can find our reproduction pair of brackets here. ...

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 31321 -

These aluminum ninety degree brackets are what fastens the XR7 chrome boot moulding to the quarter panels. The beltline weatherstip also attaches to them. These parts are only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass

$0 Price: $69.89

Buy Details

Availability: In-Stock Item
Item #: 31319 -

This aluminum ninety degree bracket is what fastens the XR7 chrome boot moulding to the quarter panel. The beltline weatherstip also attaches to it. This part is only used on the XR7 convertible as the standard convertible boot trim ends at the rear edge of the quarter glass, whereas the XR7 diecast trim goes all the way to the door jamb.You can find our reproduction pair of brackets here. ...

$0 Price: $41.75

Buy Details

Availability: In-Stock Item
Item #: 41896 -

Metal stamped brackets used to mount the radiator on saddle mounts styles only. Rubber insulators not included.Check out our video on Radiator and Fan upgrades below:

$0 Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26781 -

When you compare the originals to the reproductions you will see minor differences. This is one of the first things you look at when you open the hood of your car. For those that are looking to keep their car original, investing a little elbow grease in clean up on these used brackets is the way to go. Consider adding the upper rubber pieces to your order, see related items.These brackets came in two configurations, most has the round mounting holes but some were punched square. Not for use on...

$0 Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10753 -

Sometime during the 1970 model year, this bracket was used on cars with 24 inch radiators. At the beginning of the year the 1969 bracket was being used. Pretty much indistinguishable when mounted on the car. When you compare the originals to the reproductions you will see minor differences. This is one of the first things you look at when you open the hood of your car. For those that are looking to keep their car original, investing a little elbow grease in clean up on these used brackets is...

$0 Price: $19.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20625 -

These plastic mounting brackets came in black or gray. These kinds of minor differences can often be attributed to different suppliers. We have many that still retain the LH & RH decal for those of you trying to obtain a show car level in your restoration. The backside of this bezel will be marked LH - TOP.D0MB-15A470-B

$0 Price: $19.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16210 -

These plastic mounting brackets came in black or gray. These kinds of minor differences can often be attributed to different suppliers. We have many that still retain the LH & RH decal for those of you trying to obtain a show car level in your restoration. The backside of this bezel will be marked RH - TOP.D0MB-15A432-B

$0 Price: $216.67

Buy Details

Availability: In-Stock Item
Item #: 30839 -

Reproduction thermactor smog anti-backfire valve canister mounting bracket. For all 1968 390GT engines, GT-E 427-4V engines, and 1968-70 428 Cobra Jet engines. Painted Ford engine blue a shown. Nice reproduction, made in the USAFord part # C8AE-9C486-A.

$0 Price: $182.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24346 -

Thermactor smog anti-backfire valve canister mounting bracket. For all 1968 390GT engines, GT-E 427-4V engines, and 1968-70 428 Cobra Jet engines. Ford part # C8AE-9C486-A. *RESTORATION TIP* This bracket was painted Ford Engine blue from the factory.

$0 Price: $104.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32973 -

Used mounting bracket for the sunroof motor on the 67 - 70 Mercury Cougar. This bracket is only used with the 67 - 70 power sunroof motor.

$0 Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 25097 -

Used bracket that mounts in the rear Carburetor mounting hole of all 1970 351 Cleveland 2 barrel engines. Has the square hole that holds the factory throttle cable. This bracket is identified by the hump or curve midway between the carburetor mounting studs.Replaces Ford part number D0OZ-9741-A.*Note - Not for use with 351 Windsor engines, or M code 351C-4V engines.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24881 -

Bracket that mounts in the rear Carburetor mounting holes of all 1969 and 1970 351 Windsor 2 barrel or H code engines. Has the square hole that holds the factory throttle cable.Replaces Ford part number C9ZZ-9741-D.

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 15319 -

Nice reproduction of the Boss 302 throttle bracket as found on the G code Boss2 cars. Includes 1969-70 Cougar Eliminator and Mustang. Similar to the 428 Cobra Jet bracket but with an extended spring tab.

$0 Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32862 -

Original FoMoCo used windshield wiper motor mounting bracket for your 1969-70 Mercury Cougar or Ford Mustang. This used bracket comes with grommets, for all 1969-70 Cougar and Mustangs. Mounts under the cowl cover at the windshield. Ford part # C9ZZ-17496-A.

$0 Price: $53.49

Buy Details

Availability: In-Stock Item
Item #: 41900 -

Metal-stamped 1968 - 1970 Lower Radiator Mounting Brackets feature exact detail and proper fit. Painted dull black. Sold in Pairs. Rubber insulators not included. Replaces Ford part # C8ZZ-8052-A. Check out our video on Radiator and Fan upgrades below: ...

$0 Price: $62.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26780 -

Our used lower cradle brackets for the 24" wide radiator will always have some amount of damage as shown. We will not send you mangled junk that is heavily rusted but they will require some amount of straightening due to their vulnerable location. These also work with the 67 small block and big block when putting in a 68-70 24" radiator but keep in mind the 1967 cars are not pre-drilled as are the 1968-1970 Mustang and Cougar.We are out of the 1970 style of brackets. We only have the two...

$0 Price: $35.01

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27274 -

D0WY-9A188-A and D0WY-9A188-B Mounting bracket for the evaporative vapor separators, mounts in the drivers side trunk rail. Two brackets paired up. *Note - This is only a small part of the 9B004 assembly.

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 24274 -

U-shaped bracket that mounts the long flat part of the front sway bar to the chassis. Clamps sold individually, two needed for attaching front sway bars. This clamp with the folded ears on the sides is for the 7/8 and 15/16 inch front sway bars.

$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 13372 -

Concours correct reproduction of the front sway bar clamps used on all 67 - 70 Cougars and Mustangs with the competition suspension option, or 15/16th" sway bar. Never available until now. Exactly like the originals in every detail. Standard for all Shelbys, Boss 302s, and Cobra Jets. Stamped and formed just like the originals.

$0 Price: $22.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23952 -

Pair of U-shaped brackets that mounts the long flat part of the front sway bar to the chassis. Two needed for attaching front sway bars. *Note* 1969 and 1970 Cougars with the Competition Handling Package which included all with 428CJ and Boss 302 engine packages, used a different bracket with a Ford part number of C7ZZ-5486-A.Replaces Ford part number #: C6OZ-5486-B.

$0 Price: $15.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14975 -

There is not a special part number for this angled cup that was originally spot welded to the front of the headlamp switch. We offer these for use with our reproduction headlamp switch. This adapter or retainer is needed to correctly keep the headlamp switch at the correct angle to the lower metal dash. 1969-70 Mercury Cougar.

$0 Price: $2.95

Buy Details

Availability: In-Stock Item
Item #: 10632 -

Repro fuel pump gasket for 1967 - 1970 Cougars or Mustangs with 289/302/351W/390/428CJ engines.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13091 -

Good used part cut from the trunk of a 69-73 Mercury Cougar. This hook is concealed under the trunk mat and suspends the sequential unit over the trunk drop off area on the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

$0 Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 26645 -

Used on the lower mounts on the 67 - 70 big block and small block 24" wide radiator. A 1967 390 with the original radiator uses a different lower mount system which uses a different sized insulator. If you are updating your 67 with a 68 radiator you will need these. Sold as a pair. Replaces Ford part #: C8ZZ-8125. Check out our video on Radiator and Fan upgrades below: ...

$0 Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 26655 -

Sold as a pair, fits well into your upper radiator bracket used on 24" radiators 1967 - 1970. Replaces Ford part #: C7OZ-8124Check out our video on Radiator and Fan upgrades below: ...

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30972 -

This kit includes the 4 fine threaded "T" shaped studs (with nuts) that mount the backing plate to the spindle and the plate that goes on the inside of the backing plate. These are used parts that are not damaged or corroded, taken from a Western parts car.

$0 Price: $10.55

Buy Details

Availability: In-Stock Item
Item #: 30853 -

Reproduction mounting kit contains everything you need to install the cowl cover on the 69 - 70 Mercury Cougar.

$0 Price: $0.98

Buy Details

Availability: In-Stock Item
Item #: 33726 -

Locking nut that attaches the shift lever to the shifter arm and support inside the shifter buckets. We normally see the fine threaded nuts on the 1967-70 shifters. Please check your shift arm support for correct threads.  3/8-24 threaded nut, serrated washer head style. Check out our video on rebuilding your shifter below: ...

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10470 -

Locking nut that attaches the shift lever to the shifter arm and support inside the shifter buckets. We normally see the fine threaded nuts on the 1967-70 shifters. Please check your shift arm support for correct threads. Check out our video on rebuilding your shifter below: ...

$0 Price: $13.37

Buy Details

Availability: In-Stock Item
Item #: 11-4003 -

Used mounting plate for the heater blower motor on the 69 - 70 Cougar or Mustang without A/C.Keep in mind that this same plate can be used on a 67 - 68 Cougar and Mustang heater blower motor with A/C.

$0 Price: $31.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14158 -

This retainer is found on the backside of the door panel and is held in place by two screws. Screws that hold plate on may be available upon request for an additional fee.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14157 -

Used on the backside of all but the driver side door panel. The screws that hold this plate on may be available upon request for an additional charge.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 10298 -

Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang. Original Ford part number C8MY-1424-A. About 3 inches in diameter, this is the specified trunk hold down plate for the use with the factory mag wheels.

$0 Price: $123.18

Buy Details

Availability: Out of Stock
Item #: 41891 -

Correct looking mounting plates used to mount the 1970 original spoilers. Comes with all hardware shown, not intended for 1969 spoilers as the use of these requires large rectangular holes, found only on 1970 of the bottom side of the deck lid.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 26199 -

This specialty screw attaches the gas pedal to the throttle linkage. Fun fact: the head looks like Phillips (and that works fine) but this is actually designed for a Pozi bit.

$0 Price: $0.29

Buy Details

Availability: In-Stock Item
Item #: 26135 -

Attaching screws for the headlamp adjusting screws for the 1967-70 Mercury Cougar and most other Ford and Mercury cars and trucks. Each of the headlamp adjusting screws uses 2 of these screws. A Cougar with 4 headlights would need a total of 16 of these screws.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0017 -

Unique shouldered screw that keeps your switch in perfect alignment, using incorrect screws will damage the switch.Fixed columns require 3 screws. Tilt columns require 2 screws.  *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

$0 Price: $3.59

Buy Details

Availability: In-Stock Item
Item #: 33216 -

Set of 16 attaching screws for the headlamp adjusting screws for the 1967-70 Mercury Cougar and most other Ford and Mercury cars and trucks. Each of the headlamp adjusting screws uses 2 of these screws. A Cougar with 4 headlights would need a total of 16 of these screws.

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23835 -

C5AZ-10A370-C Alternator mounting spacer, goes between the cylinder head and alternator housing. Fits 1968-70 390-2V, 390-4V, and 428CJ engines. Smog OK. There is no casting number but one is listed C5AE-10A370-C. Inside diameter 7/16". We measure them out at 1-5/8 inches long, supposed to be pink anodized or tinted.