1970 Mercury Cougar

Steel inspection cover for all 1967 Cougar or Mustang with any of the FE engines 390, 427, or 428CJ and C6 automatic transmissions. Dust and inspection cover for the flexplate and torque converter. Usually will have a casting number of C6AP-7986-A stamped on it, also referred to as a Transmission C6 dust cover 390GT, 428GT500, 428CJ, 428SCJ.*Note - Some of these plates do not have the vent, or dimple at the bottom, like in the picture.Please keep in mind that this is a 40+ year old used item....

Reproduction dust and safety cover for 69 - 73 Cougars and Mustangs with the FMX (X code) automatic transmission. Access plate for the torque converter and flex-plate.NOTE - Although the FMX and the C4 inspection plate look similar visually, they are in fact different sizes with different bolt spacing.

Used dust and safety cover for all 69 - 73 Cougars and Mustangs with the FMX (code X) automatic transmission. Access plate for the torque converter and flex-plate.

Grade B used inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch. This cover will have some rust and a dent or creases. Find the Grade A cover here.

Reproduction inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch.Replaces Ford part number C3AZ-6366-A.

Reproduction 21 pc installation screw kit to install the well liner on your 69 - 70 Convertible Cougar or Mustang.

Reproduction installation kit for the 1970 Cougar dash pad.

Replaces Ford Part # C9ZZ-10914

Insulator for mounting the ammeter on any 1969-73 Mercury Cougar or Ford Mustang with factory ammeter in gauge cluster. Also used on other Ford cars with ammeter. Casting number C9ZF-10C914.Replaces Ford Part # C9ZZ-10C914

Available in original blue light diffuser or custom red or yellow for a brighter "custom" look. Please note that depending on the options you have there are different numbers of defusers (filters) needed for different years and models. SOLD AS SET OF FOUR(4). 67 - 68 Cougar Uses 6 - Instrument Cluster (XR7 or Standard) 2 - Clock 2 - Oil Pressure Gauge 69 - 70 Cougar Uses 5 - Instrument Cluster (XR7 or Standard) 2 - Clock ...

New foam insulation for the lower tube of the steering columns. Can be used on fixed and tilt columns, from 1968-73, on all Mercury Cougars, Ford Mustangs, and most all other Ford steering columns with a lower tube with inside diameter of 1-5/8 inches. The originals have almost always disintegrated. Adhesive probably isn't needed, but we recommend just a little drop of something to hold it in place. This is a dense foam insulation ring. DIY guys, this material can be found in bulk at home...

Self adhesive cork insulation tape for use on any 1967-73 Mercury Cougar or Ford Mustang with air conditioning. This is original style insulation wrap that adheres firmly to all metals. Material is 1/8 inch thick, and 2 inches wide, comes in a roll of 3 foot length. Perfect material for wrapping expansion valves, and joints prone to condensation.   

Reproduction insulator for the lower portion of the steering column found on all 1969-73 Mercury Cougar or Ford Mustangs. Unique slide in plastic bushing or insulator, which slides into the bottom tube of both fixed and tilt columns. Most originals are broken or missing. Two sizes of insulators, please verify year and diameter.1968 tube measures 1 3/8"1969 - 1973 tube measures 1 5/8"*NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this...

Used tube insulator for the lower portion of the steering column found in 1969-72 Mercury Cougar or Ford Mustang. Because of the very fragile nature of this unit, stock is limited. Reproduction version is normally available, see related items. Ford part # C9AZ-3E629-A. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Reproduction Rear Leaf Spring Center Mount Insulator Pad for the 1967 - 1973 Mercury Cougar. Not factory, but also fits Ford Mustang. Reduce vibration and prevent metal to metal contact at the same time with new spring insulators. This molded rubber leaf spring insulator installs in the center of the leaf spring on the top & bottom side, above the spring perch and below the insulator retainer. 4 per car. Manufacturer lists the following applications: MakeModelBody StyleNotesYearMercur...

Set of Four Reproduction Rear Leaf Spring Center Mount Insulator Pads for the 1967 - 1973 Mercury Cougar. Not factory, but also fits Ford Mustang. Reduce vibration and prevent metal to metal contact at the same time with new spring insulators. This molded rubber leaf spring insulator installs in the center of the leaf spring on the top & bottom side, above the spring perch and below the insulator retainer. 4 per car. Manufacturer lists the following applications: MakeModelBody...

D0AE-9425-M Cast iron intake manifold used on all 1970 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of D0AE-9425-M. Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D0AZ-9424-D. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. *Note - 351...

D0AE-9425-E, -H, or -L Cast iron intake manifold used on all 1970-71 M code 351-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of D0AE-9425-E, -H, or -L . Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D0AZ-9424-C. *Note - 351 Cleveland engines only.

C9OE-9425-A or -F Cast iron intake manifold used on all 1969-70 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of C9OE-9425-A or -F. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C9OZ-9424-A. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. *Note - 351...

Used C8OE-9425-C Cast iron intake manifold used on all 1969 - 1970 Q and 1968 - 1970 R code 428CJ and 428SCJ engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C8OE-9425-C . Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford part number C8OZ-9424-B.  Current date code is 9C25 or March 25, 1969 and 0A19 or January 19, 1970. *Trivia - One of the heaviest...

Reproduction intake manifold valley pan for the Mercury Cougar or Ford Mustang equipped with the 351 Cleveland engine with the 2V (2 barrel) heads.

Ford licensed reproduction of the interior assembly manual for the 1970 Ford Mustang that shows information provided to those assembling the cars on the assembly lines.  Much of the information is also applicable to the 1970 Mercury Cougar.

Yet another incorrect reproduction sold by West Coast Classic Cougar and made by someone who has never even sat in a Cougar... I have no idea where these manufacturers get their color charts! At least you have a base in which to paint over with the correct color. Sorry, we never get good used units in these days. *NOTE* This would be a good time to purchase trunk filler boards and package tray if you need them as we can save you money by combining these like shaped items. ...

Yet another incorrect reproduction sold by West Coast Classic Cougar and made by someone who has never even sat in a Cougar... I have no idea where these manufacturers get their color charts! At least you have a base in which to paint over with the correct color. Sorry, we never get good used units in these days. *NOTE* This would be a good time to purchase trunk filler boards and package tray if you need them as we can save you money by combining these like shaped items. ...

Yet another incorrect reproduction sold by West Coast Classic Cougar and made by someone who has never even sat in a Cougar... I have no idea where these manufacturers get their color charts! At least you have a base in which to paint over with the correct color. Sorry, we never get good used units in these days. *NOTE* This would be a good time to purchase trunk filler boards and package tray if you need them as we can save you money by combining these like shaped items. ...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction Houndstooth upholstery kit in black and white for the front and rear seats of the Mercury Cougar coupe.*NOTE* This product will take 16-18 weeks for delivery.

Upholstery components have an ETA of 5 - 9 weeks.Nothing captures the feel of 1970 like the hounds-tooth pattern that once again has become fashionable... Now this ultra cool material has been correctly reproduced and we are the first to offer it in a pre-sewn ready to install kit. The houndstooth option was available on both decor and XR7 Cougars and also was available on the Eliminator in black and white only. Houndstooth cloth interior was never offered in a convertible from the factory but...

Upholstery components have an ETA of 5 - 9 weeks.Nothing captures the feel of 1970 like the hounds-tooth pattern that once again has become fashionable... Now this ultra cool material has been correctly reproduced and we are the first to offer it in a pre-sewn ready to install kit. The houndstooth option was available on both decor and XR7 Cougars and also was available on the Eliminator in black and white only. Houndstooth cloth interior was never offered in a convertible from the factory,...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in black for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the front and rear seats. The front seats upholstery kit set will fit both the coupe and convertible, but the rear seat is different and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction vinyl comfortweave interior upholstery kit in black for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of convertible Cougar, the rear seat is a different animal and will not fit the rear seat of the coupe.  *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we offer to...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in dark red for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in dark red for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium blue for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium blue for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium brown for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 5 - 9 weeks. Reproduction comfortweave vinyl interior upholstery kit in medium brown for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible. *TRIVIA* Did you know that after 1971 Ford started calling the comfortweave inserts knitted inserts? ...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium green for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium green for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in white for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in white for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in black for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct...

Upholstery components have an ETA of 5 - 9 weeks. Reproduction comfortweave vinyl interior upholstery kit in black for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe. *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in dark red for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in dark red for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium blue for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium blue for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing...

Upholstery components have an ETA of 5 - 9 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium brown for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 5 - 9 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium brown for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing...