Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1009-1056 of 5109
$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 32354 -

Reproduction LED version of the under dash courtesy light located on the very outer right and left under the dash. Although the originals had very slight differences between left and right, this reproduction is good for both sides.  Includes LED bulb. Sold individually, 2 per car required. Replaces Ford part numbers D0ZB-13707-C and  D0ZB-13K705-C

MSRP:$49.85
$49.85 Price: $29.88

Buy Details

Availability: In-Stock Item
Item #: 26198 -

Since the reproduction is no longer available anywhere, we've taken a used plug and our electrical department has pieced it together to make a useable plug. The Eliminator uses the XR7 harness but not the XR7 rocker switches in the center of the dash. This bypass plug completes the circuit left open when no XR7 switches are plugged into the harness.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30418 -

The Eliminator uses the XR7 harness but not the XR7 rocker switches in the center of the dash. This bypass plug completes the circuit left open when no XR7 switches are plugged into the harness.Ford part # C9WB-13B676-A

$0 Price: $5.00

Buy Details

Availability: In-Stock Item
Item #: 14331 -

This plastic socket is very brittle and almost always breaks when installing a new door jamb switches. Does not fit cars with Warning Group with door ajar option. Simply install by carefully breaking the old brittle plastic socket apart with pliers to free up the wire leads and plug wire leads into the new socket.

$0 Price: $81.62

Buy Details

Availability: In-Stock Item
Item #: 26760 -

These were never offered originally but are a popular accessory and more cost efficient than buying a replacement for that unsightly old wheel and tire you took from a Granada in the bone yard!

$0 Price: $81.62

Buy Details

Availability: In-Stock Item
Item #: 26762 -

These were never offered originally but are a popular accessory and more cost efficient than buying a replacement for that unsightly old wheel and tire you took from a Granada in the bone yard!

$0 Price: $59.15

Buy Details

Availability: In-Stock Item
Item #: 10141 -

Reproduction ashtray cover assembly for the center console found in the Mercury Cougar or Ford Mustang. Does not include ashtray receptacle, which is sold separately. Replaces Ford part # C9ZZ-6504814

$0 Price: $22.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31895 -

Used ashtray cover assembly for the center console found in the Mercury Cougar or Ford Mustang. Does not include ashtray receptacle, which is sold separately.. NOTE: When ordering, mention what color you're looking for in the order comments and we will do our best to accommodate.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0243 -

Used quarter window stop, cover plate, for any 1969-70 Mercury Cougar and Ford Mustang. These were originally painted body color, and were laid on either inside the front cowl or the package tray for painting. The one for the quarter is roughly1" x 2-7/16 inches long, the holes are 5/16, and the spacing is 31/32" on center to match the stop. Replaces Ford part number C9ZZ-6530068-A.

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0102 -

Tilt steering column cover plate for turn signal lever. Two versions, two different sizes of openings for the turn signal wand. Original used Ford part, plan on painting to match your steering column. Fits all 1970-71 Mercury Cougar, 1970 Ford Mustang, and other Ford/Mercury cars with factory tilt steering columns. Replaces Ford part number D0AA-9D793-AW.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent...

$85.00 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19350 -

These are Grade "A" no excuses panels. This panel can be rather difficult to fix so we suggest you buy the best from the get go considering the low price. These will have no filler, no damage and often times will still bear the original paint.Ford part # C9ZZ-6502010-A.

MSRP:$85.00
$85.00 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26989 -

These are Grade "B" cowl cover panels. These units may have one or two small dents, but can be an easily straightened and made to be perfect. Ford part # C9ZZ-6502010-A.

$0 Price: $210.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11690 -

Reproduction cowl center panel for Mercury Cougar and Ford Mustang.

$0 Price: $486.17

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11689 -

Reproduction 2 piece cowl panel for the Mercury Cougar or Ford Mustang.Here's our video to help you fortify your Cougar!

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31181 -

Crankshaft oil slinger for all small block Ford V-8's, starting 1963 until at least through 1973. 1963-68 289 and 289 HiPo engines. 1968-73 302 engines, 1969-70 Boss 302 engines, 1969-73 351W engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Outside diameter about 2-7/8 inches. Ford part number C3OZ-6310-A.

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31183 -

Crankshaft oil slinger for all 351C or Cleveland engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines.  Ford part number D0AZ-6310-A.

$0 Price: $79.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-1000 -

For all 1969 and 1970 Cougars with H code 351-2V and M code 351-4V engines and FMX automatic transmissions. This part weighs 2.66 pounds and when set on a level surface the height of the mounting hole on the driver side measures 3" on center and the passenger side 3 1/8" on center. Ford part number C9ZZ-6A023-A. *NOTE* The picture with all four crossmembers in a line shows the three versions of the small block C-6 and FMX units in the foreground and the last is the big block C-6 unit. Notice...

$0 Price: $109.15

Buy Details

Availability: In-Stock Item
Item #: 17-0002 -

This original part has been reinforced to brace the front frame rails / tie together lower control arm pivots in a superior way to the original design. This design will prevent any camber change in hard cornering. This is not needed for the average Cougar owner but if you are desiring to make your car a "Handling Machine" every bit counts and this is an inexpensive upgrade. These crossmembers are welded in house, and will be unpainted bare metal. This combined with our shock tower...

$65.00 Price: $69.15

Buy Details

Availability: Out of Stock
Item #: 11372 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. This is the reproduction cross member offered by most of the Mustang...

$0 Price: $93.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11373 -

Good original part that has not been noticeably twisted, bumped, bent, or heavily rusted. Notice the factory indentations that are a result of the manufacturing process (dent from jig). Also know that there is always at least a couple minor dings or scrapes from decades of being the lowest point of the car. Much better fit than repro and note the repro is made from thinner gauge steel. Also know that we generally do not bead blast our used parts before sending them but often we show them on...

$0 Price: $29.57

Buy Details

Availability: Out of Stock
Item #: 11383 -

This reproduction radiator support crossmember is correct for the 1967-68 Mercury Cougar and Ford Mustang, but will work on any 1967-70 Cat or Pony.Replaces Ford # C7ZZ-6510852-B or C9ZZ-6510852.

$0 Price: $178.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19949 -

New crossmember to adapt the Tremec TKO manual transmission to the Mercury Cougar or Ford Mustang. This unit can also be used for the Ford AOD. 

$0 Price: $2.55

Buy Details

Availability: In-Stock Item
Item #: 31839 -

Parking brake return spring cup for the 69 - 73 Cougar or Mustang. This cup sits at the end of the spring and is held in place by an adjusting nut. It's used to keep the spring from sliding off of the front emergency / parking brake cable.

$0 Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31627 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

$0 Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31628 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

$0 Price: $185.00

Buy Details

Availability: Out of Stock
Item #: 33030 -

Custom made Walking Cat belt buckle for the Cougar die hard. This would make a great gift for anyone who lives and breathes everything Cougar. The buckle is bare, unpainted and ready for you to customize how you see fit. We're not sure how we ended up with this awesome collectable, but it's definitely one of a kind and the only one we know of, so when it's gone it's gone!  Measures 3 3/8" x 2 1/4"

$0 Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27227 -

1970 Front unibody cut, these 1970 Mercury Cougar front structures all have reinforced shock tower braces like the 428 Cobra Jet Mustangs. Additionally these have the cutouts on top of the radiator core support for the Mustang twist locks. Mustang guys, please note, we do not have them without these braces. This cowl has the holes for the factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No...

$0 Price: $1,200.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27229 -

1970 Front unibody cut, these 1970 Mercury Cougar front structures all have reinforced shock tower braces like the 428 Cobra Jet Mustangs. Additionally these have the cutouts on top of the radiator core support for the Mustang twist locks. Mustang guys, please note, we do not have them without these braces. This cowl only has the holes for the heater hoses only, not cut for factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or...

$0 Price: $743.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20184 -

Comes with good shock towers, front aprons, and core support. This is a great value for those that need to replace multiple parts upfront as you will not only get factory joined parts that will save you money and time, but it will also  preserve the value of your car. With a clean Western cut like this, one should be able to install it so that nobody would ever know your car has had anything replaced. You will have to call to order this one. Expect to pay about $300 for crating and...

$0 Price: $89.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13601 -

Single cylinder head from 1970-73 Mercury Cougar with H code 351C-2V engines. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 2.04 and 1.65 inch valves, and the chambers measure out at 78.2 cc's. These are considered 'Open Chamber Heads'. With stock pistons, these heads will net an approximate compression ration of 9.5:1. Basic cylinder head number is 6090. Several Ford casting numbers were used, including the common D0AE-J. 2V in the...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18866 -

Single cylinder head from 1970 Mercury Cougar H code 351W engines, 351-2V. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 1.84 and 1.54 inch valves, and the chambers measure out at 60-62 cc's. Basic cylinder head number is 6090. Several Ford casting numbers were used, including the common D0OE-6090-C. 1970 351 Windsor engine, not to be confused with the 351 Cleveland engine from the same year.These weigh 53 lbs. each, and cannot be...

$0 Price: $2.95

Buy Details

Availability: In-Stock Item
Item #: 10228 -

This "D" clip is larger than that found on the Mustangs and 1967 Cougar because it not only hung the wiring loom on the driver side of your engine compartment but also the vacuum lines going to the headlight switch. This clip is also found under the starter solenoid and under dash. We think that it is Ford part number 382184.

$0 Price: $189.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33090 -

Used highly collectible Dan Gurney slot car racing track made by the Republic Tool and Manufacturing Corporation in Los Angeles California. Open box and lightly used. Both cars are intact, and the decals have been placed on the the vehicles and the track. Everything is good condition, but the cars have not been tested and the red car has had it's wheels painted. Other than that, this is a rare and truly great find. Features the Mercury Cougar Logo on front of the box.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10526 -

1970 Mercury Cougar Upper Steering Column Dash Filler "Grade B" - Used Plastic filler piece that goes over the steering column and bridges the instrument cluster portion of the dash pad. Ford calls this part a "PANEL" (Instrument Panel Cluster) in the Master Parts Catalog. "B" grade used is one with a crack in the middle and at least one other chip (see picture), you can put a desired color in the comments section of the online order. We suggest planning on 'painting to match your interior'....

$0 Price: $189.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0101 -

Complete very nice grade A bezel for the standard or decor level interior for both the 1970 and 1969 Mercury Cougar. Includes a metal "COUGAR" emblem. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you...

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31832 -

Complete grade B bezel for the standard or decor level interior for both the 1970 and 1969 Mercury Cougar. Grade B bezels will have faded woodgrain and slightly bent edges. Includes a metal "COUGAR" emblem.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-2000 -

Complete very nice bezel for the Standard or Decor level interior for both the 1970 and 1969 Mercury Cougar. Includes a plastic "COUGAR" emblem.

$0 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0205 -

Grade "A" panel with no blemishes, ready to install on your show car. This listing does not include emblem or the aluminum surround.

$0 Price: $189.27

Buy Details

Availability: In-Stock Item
Item #: 11766 -

This actually is a pretty impressive part once installed if your expectations are not overly high. It fits snug (very tight) over your existing cracked dash and you affix it by putting silicone around the perimeter. Once in place the obvious indicators of it not being original are the lack of simulated stitching on the leading edge and the larger perforations for the center speaker. The good thing about this unit is that your dash pad can have large chunks missing and it still will work! You...

$0 Price: $299.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0112 -

Used steel lower dash panel for all 1970 Mercury Cougar and Ford Mustang with factory air conditioning. This is a bolt in dash section, ships bare, no brackets included. Grade A = no pitting, no extra holes. Replaces Ford part number D0ZZ-6504320.

$0 Price: $299.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0111 -

Used steel lower dash panel for all 1970 Mercury Cougar and Ford Mustang without factory air conditioning. This is a bolt in dash section, ships bare, no brackets included. Grade A used = no pitting, no extra holes. Replaces Ford part number D0ZZ-6504320.

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0515 -

Used steel lower dash panel for all 1970 Mercury Cougar and Ford Mustang without factory air conditioning. This is a bolt in dash section, ships bare, no brackets included. Grade B used = some pitting and or extra holes. Replaces Ford part number D0ZZ-6504320.

$0 Price: $20.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32085 -

Used wire set for the dash plug from the main under dash wiring harness from 69 - 70 Cougar or Mustang. Wire colors may vary. NOTE: When ordering, make sure to leave comment on whether you have a Standard or XR7

$0 Price: $125.45

Buy Details

Availability: In-Stock Item
Item #: 26000 -

Quality Kenwood speakers that features two 40 watt 3 1/2" coaxial two way speakers. this unit is a huge improvement over the factory single speaker and no modifications needed. This unit is for all 1967-73 cars with in-dash factory AC or not. In Non-A/C cars, this speaker may partially crush the vent duct tube. Check out this video

$0 Price: $70.91

Buy Details

Availability: In-Stock Item
Item #: 11381 -

Since at least 2 speakers (channels) are required for stereo radios, this speaker system has been developed for classic vehicles that came with only one mono speaker. These dual voice coil "DVC" speakers will give you the best possible sound from your original speaker location. DVC speakers have up to 70% more cone area than the conventional dual speaker assemblies giving you improved bass response and 140 watt power handling. Both stereo channels connect directly to one speaker with dual...

$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 14981 -

This plate allows you to install (2) 3 1/2" speakers of your choice in place of the (1) original factory speaker in the dash of your Cougar or Mustang. This is the same plate used on the Kenwood and Pioneer Dual Dash Speaker kits. Check out this video