Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1297-1344 of 3185
$0 Price: $34.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32750 -

Used ignition switch for the 67 Cougar or Mustang. Does not include cylinder or keys. Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $24.55

Buy Details

Availability: In-Stock Item
Item #: 32060 -

Reproduction ignition switch w/ cylinder and 2 keys for the 1967 Cougar or Mustang.NOTE: The item comes with economy keys, they are much thinner than the premium Ford keys. The cylinder will not accept the premium keys. Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $38.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24015 -

C7AZ-3C511-B Rear power steering pump support bracket. Also called the high pressure hose indexing bracket. For any 1967 Cougar or Mustang with any V8 engine. OEM used part designed to maintain the position of the high pressure power steering hose from coming in contact with with moving or high heat parts. *Note - May or may not work with non-original or replacement high pressure hoses.

$0 Price: $95.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33664 -

Used compressed gas cylinder for a 1967-1973 Mercury Cougar or Ford Mustang. Later design canister is about 2-7/8" inches in diameter, slightly larger than the OEM 1968-70 version. These will be mostly empty and for display only. OEM cylinders are approximately 2-13/16" thick. These cylinders are very close to propane or Map gas cylinders in construction. Paint one red, and slap a cardboard sleeve with a reproduction decal and close the trunk lid. Dust cap may or may not be included,...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24004 -

Application 1967 289 and 390 thermactor California emissions fresh air inlet assembly or Air pump filter assembly. *Note - Excludes HiPo, or K code 289 engines for 1967. Ford part # C7AF-9A492-A

$0 Price: $171.00

Buy Details

Availability: In-Stock Item
Item #: 42397 -

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $129.87

Buy Details

Availability: Out of Stock
Item #: 42398 -

Full passenger (right hand) side front frame rail that measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 41627 -

Reproduction passenger side front fender apron that has the shelf for installing the battery tray. *Restoration Hint* This section of metal was VIN stamped, consider welding in the stamped VIN section to keep your car whole.Here's a little film to help you fortify your flexxy feline!

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 10932 -

New inner floor frame support for the Mercury Cougar and Ford Mustang.

$0 Price: $140.04

Buy Details

Availability: In-Stock Item
Item #: 42390 -

Full driver (left hand) side front frame rail that measures 52" long. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $248.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0044 -

Used tilt / tilt away column shaft for the Mercury Cougar or Ford Mustang. Inner shaft with tight U-joint and perfect steering wheel mounting threads. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $38.58

Buy Details

Availability: In-Stock Item
Item #: 41880 -

These interior door release handles are the only ones on the market from the 4 different manufacturers that are indexed correctly. They are the updated design for 2019 that fits level and the chrome is excellent. All the other versions either tip up or down too far when placed on the splines. These were used on the xr7 model in 1967 and on all Cougar / Mustang models in 1968.  The casting number on the back reads C7AB-5422617-A.

$0 Price: $38.58

Buy Details

Availability: In-Stock Item
Item #: 41884 -

These interior door release handles are the only ones on the market from the 4 different manufacturers that are indexed correctly. They are the updated design for 2019 that fits level and the chrome is excellent. All the other versions either tip up or down too far when placed on the splines. These were used on the xr7 model in 1967 and on all Cougar / Mustang models in 1968. The casting number on the back reads C7AB-5422616-A.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23993 -

Driver quality used right side or passenger side folding door handle. This type of handle was used on the 1967 XR7 models and 1968 Cougars. This is also the deluxe handle found in Mustang and other Ford / Mercury cars. Some pitting, will have a good spring and rubber bumper. Sorry mounting screw not included.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 30185 -

Reproduction dust and safety plate for all C4 (code W) automatic transmissions also known as the Cruis-o-Matic transmission. Inspection cover for torque converter and flexplate.NOTE - Although the C4 and the FMX inspection plate look similar visually, they are in fact different sizes with different bolt spacing.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0051 -

Dust and safety plate for all C4 (code W) automatic transmissions also known as the Cruis-o-Matic transmission. Inspection cover for torque converter and flexplate.

$0 Price: $31.85

Buy Details

Availability: In-Stock Item
Item #: 30216 -

Reproduction steel inspection cover for all 67 - 70 Cougars or Mustangs with 390, 427, or 428CJ engines with the C6 automatic transmissions. Dust and inspection cover for the flexplate and torque converter, also referred to as a Transmission C6 dust cover 390GT, 428GT500, 428CJ, 428SCJ.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0052 -

Steel inspection cover for all 1967 Cougar or Mustang with any of the FE engines 390, 427, or 428CJ and C6 automatic transmissions. Dust and inspection cover for the flexplate and torque converter. Usually will have a casting number of C6AP-7986-A stamped on it, also referred to as a Transmission C6 dust cover 390GT, 428GT500, 428CJ, 428SCJ.*Note - Some of these plates do not have the vent, or dimple at the bottom, like in the picture.Please keep in mind that this is a 40+ year old used item....

$0 Price: $49.86

Buy Details

Availability: Out of Stock
Item #: 16-0086 -

Grade B used inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch. This cover will have some rust and a dent or creases. Find the Grade A cover here.

$0 Price: $109.15

Buy Details

Availability: Out of Stock
Item #: 30436 -

Reproduction inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch.Replaces Ford part number C3AZ-6366-A.

$0 Price: $379.40

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19869 -

This used kit is for the person who has purchased a console minus the parts needed to hook it up to the shifter. The chrome shifter is identical to the non-console version except for the little loop welded at the base. This loop is needed to attach the white plastic arm that moves the indicator light. This 1967 console kit includes the light indicator wiring harness with the black plug. It is unique to 1967 harnesses, it has a black colored flat male/female plug. This short wiring harness is...

$0 Price: $18.05

Buy Details

Availability: In-Stock Item
Item #: 13920 -

Available in original blue light diffuser or custom red or yellow for a brighter "custom" look. Please note that depending on the options you have there are different numbers of defusers (filters) needed for different years and models. SOLD AS SET OF FOUR(4). 67 - 68 Cougar Uses 6 - Instrument Cluster (XR7 or Standard) 2 - Clock 2 - Oil Pressure Gauge 69 - 70 Cougar Uses 5 - Instrument Cluster (XR7 or Standard) 2 - Clock ...

$0 Price: $3.78

Buy Details

Availability: In-Stock Item
Item #: 11087 -

Self adhesive cork insulation tape for use on any 1967-73 Mercury Cougar or Ford Mustang with air conditioning. This is original style insulation wrap that adheres firmly to all metals. Material is 1/8 inch thick, and 2 inches wide, comes in a roll of 3 foot length. Perfect material for wrapping expansion valves, and joints prone to condensation.   

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23942 -

C6OE-9425-A Cast iron intake manifold used on all 1967 C code 289-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of C6OE-9425-A. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4AZ-9424-H. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

$0 Price: $187.88

Buy Details

Availability: Out of Stock
Item #: 23943 -

C6OE-9425-B Cast iron intake manifold used on all 1967 A code 289-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C6OE-9425-B. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4OZ-9424-G. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

$0 Price: $251.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31377 -

C6AE-9425-G Cast iron intake manifold used on very early 1967 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold, used before 1-11-1967. Take off manifold with correct casting number of C6AE-9425-G. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C6AZ-9424-N. This manifold will need to be cleaned and hot tanked prior to use. Current dates available: 6F22, 6L15. *Note -...

$0 Price: $297.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23995 -

C7AE-9425-E Cast iron intake manifold used on 1967 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold, used before 9-11-1967. Take off manifold with correct casting number of C7AE-9425-E. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C6AZ-9424-K. This manifold will need to be cleaned and hot tanked prior to use. Current dates available: 7A31, 7C27, 7D3,  *Trivia -...

$0 Price: $396.35

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31558 -

Reproduction lightweight aluminum high performance intake manifold with the Cobra logo. This is an exact copy of the manifolds Carol Shelby offered on his Shelbys and Cobras in the late 1960's. Fits 260,289 and 302 engines.You can find the SHELBY lettered intake here. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. ...

$0 Price: $396.35

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31557 -

Reproduction lightweight aluminum high performance intake manifold with the Shelby logo. This is an exact copy of the manifolds Carol Shelby offered on his Shelbys and Cobras in the late 1960's. Fits 260,289 and 302 engines.You can find the COBRA lettered manifold here. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. ...

$0 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 33746 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

$48.50 Price: $57.91

Buy Details

Availability: In-Stock Item
Item #: 14913 -

Sold as a pair, these are a perfect fit Premium Scott Drake reproduction. Correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

$0 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 14914 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

$0 Price: $34.07

Buy Details

Availability: Out of Stock
Item #: 14915 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers so if speaker holes are needed you will have to use your old panels as a template to drill holes in these "Mustang" reproductions. Replaces Ford Part number C7WY-650345-A1G / Casting number as seen on the back of the driver side will read C7WB-6502345-BW

$0 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 14916 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

$0 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 14918 -

Reproduction interior kick panels in parchment / off-white for the Mercury Cougar or Ford Mustang. Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

$0 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 14920 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

MSRP:$24.99
$24.99 Price: $18.05

Buy Details

Availability: In-Stock Item
Item #: 42073 -

Great option for international customers. Light weight, and all you need is a PC or laptop, and you can plug this drive in and access all the same information that you'd find in the full sized shop manual books.

$0 Price: $17.50

Buy Details

Availability: In-Stock Item
Item #: 33583 -

Reproduction jack and tool bag for the trunk area of your Cougar or Mustang. Made in the same plaid style as the trunk mat on the outside, and a white soft liner on the inside. Measures 16 1/2" x 8 1/2"

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 26443 -

Notice this shows a picture of a Mustang not a Cougar and shows the handle on top instead of the disc. This decal did in fact find its way onto some Cougars in 1967. Replaces Ford Part # C7ZB-17093-D. "CZZB" typo on decal can be seen on some originals. We see this decal with the typo and without on original cars.

$0 Price: $7.25

Buy Details

Availability: In-Stock Item
Item #: 14-0052 -

This is the original JB Weld. We decided to bring this stuff in as a convenience to you, our customers. Why not buy a pack so that the next time you need to bond something together, you'll have a couple of tubes handy? No need to get up and go to the hardware store. With just a few clicks of your mouse, you can have it at your door in a few days (more or less, depending on your location). Good for all sorts of projects around the house or garage.

$0 Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21597 -

Used jumper wire with correct ends for doubling back on the tachometer leads from the under dash harness. Works for all generations 1967-68, 1969-70, and 1971-73 Ford anything and Mercury, and Mercury Cougar with factory tachometers. If your tachometer goes bad, you will not start or keep your engine running. Good for bypassing tachometers for testing and getting home. Keep in your glove compartment or tool box. Mostly the wire color is red, but sometimes there will be other colors.

$0 Price: $44.55

Buy Details

Availability: In-Stock Item
Item #: 31538 -

Brake switch jumper wire, 4 inch long extension. Bridges the under dash wiring harness and the brake light switch. Not used on many cars, we suspect that it was used on the assembly line when the brake switch plug didn't reach the brake switch. Adding one of these jumpers, saved time from re-routing the under dash wiring harness. This jumper can also be used to repair bad stop light connectors on 1967-70 Cougars and Mustangs (and other Fords) by cutting off the male end and splicing it...

$0 Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11165 -

Brake switch jumper wire, 4 inch long extension. Bridges the under dash wiring harness and the brake light switch. Not used on many cars, we suspect that it was used on the assembly line when the brake switch plug didn't reach the brake switch. Adding one of these jumpers, saved time from re-routing the under dash wiring harness. Ford master part numbers: C5AZ-14489-C, C8ZA-13K408-A and C8ZZ-13K408-A

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0079 -

Used jumper wire that connects the tilt-a-way door jamb and to the underdash harness.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.