International Customers Click Here [Updated 1/2025]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Intake Manifold - 289-4V - Used

Item #: 23943

Out of Stock
Expected back in Stock:
Unknown

Price: $187.88
Online Only Price

Cost: 15031

Earns: 752

Bonus: 188

Availability

Out of Stock - Ships: Unknown

1 Cougar / 1 Mustang Applications

1967 Mercury Cougar
1967 Ford Mustang

Description

C6OE-9425-B Cast iron intake manifold used on all 1967 A code 289-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C6OE-9425-B. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4OZ-9424-G.

*Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

Specifications:

Shipping Weight: 45.00 LBS

(weight shown may be the dimensional weight)

Shipping Dimensions: 30in x 20in x 12in

0 Product Q&A

Number of questions: 0

Please login to ask a question.

1 Reviews (5.00 of 5 Rating)

5.00 out of 5 stars
Based upon 1 Review(s).

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

John

Intake Manifold - 289-4V - Used ~ 1967 Mercury Cougar / 1967 Ford Mustan

6/10/2016

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

the manifold is in perfect shape. great used part

Click here to help us improve this product listing

Why am I being warned about potential exposure to chemicals in motor vehicle parts?

Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
This product is known to contain the following listed chemicals: None

Frequently purchased with:

Frequently
Purchased With

Item #: 23830 [More info]
[More info] Carburetor Spacer Plate - 4V - 289 / 302 / 351W - Used
1967 - 1969 Mercury Cougar
1967 - 1969 Ford Mustang
Factory cast aluminum four barrel carburetor spacer plate, 1-1/8" tall. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. *excludes Boss 302 Eliminator...

Buy

$60.89
Online Only Price
Frequently
Purchased With

Item #: 19902 [More info]
[More info] Fuel Line - Fuel Pump To Carburetor - 289 - 302 - 4V Autolite 4300 - OE Steel - Repro
1968 - 1970 Mercury Cougar
1968 - 1970 Ford Mustang
This is the steel tube that goes from the carburetor to the fuel pump on the 289 or 302 with the AutoLite 4300 4 barrel carberator. Original steel version.

Buy

$30.89
Online Only Price
Frequently
Purchased With

Item #: 19973 [More info]
[More info] Carburetor Spacer Plate - Gasket - Small Block - 4V - EACH - Repro
1967 - 1970 Mercury Cougar
1967 - 1970 Ford Mustang
New carburetor gasket for all 289-4V, 302-4V, and 351-4V, Mercury and Ford cars from 1964-1970. Same gasket used between intake manifold and spacer, and spacer and carburetor. Sold individually, 2 required for...

Buy

$5.95
Online Only Price
Frequently
Purchased With

Item #: 41860 [More info]
[More info] Repair Clips - Headlight Bucket / Grille - Set of Four - New
1967 - 1968 Mercury Cougar
1969 - 1970 Ford Mustang
New to the market grille fix for 1967 - 1968 Mercury Cougars / Patent Pending. These simple little grille repair clips have been needed since these cars were new! Over the years we have seen a multitude of home...

Buy

$14.85
Online Only Price
Frequently
Purchased With

Item #: 41586 [More info]
[More info] Sending Unit - Water Temperature - 289 / 302 / 351W* / 390 / 427 GT-E / 428CJ - PREMIUM - Repro
1967 - 1969 Mercury Cougar
1967 - 1969 Ford Mustang
Brass sensor that screws into intake manifold and activates temperature gauge in dash. Replaces Ford Part #: C6DZ-10884-B (SW-552) or C9WY-10884-A (SW-888)*. Temp Sender Switch Temp Rating : 15.2-19 Ohms Resistance...

Buy

$17.24
Online Only Price
Frequently
Purchased With

Item #: 26407 [More info]
[More info] Air Cleaner Decal - 289 4V - Repro
1967 Mercury Cougar
1967 Ford Mustang
This is a reproduction of the original orange engine displacement decal with a black and white checkerboard background on each end. Located on the top of the air cleaner.Fits the following models with a 289 4...

Buy

$7.75
Online Only Price
Frequently
Purchased With

Item #: 53275 [More info]
[More info] Carburetor Installation Stud Kit For 1/4 - 3/8 Spacer Plates - Repro
1967 - 1973 Mercury Cougar
1967- 1973 Ford Mustang
This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (1 3/4"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course...

Buy

$9.25
Online Only Price
Frequently
Purchased With

Item #: 53272 [More info]
[More info] Gasket - Carburetor to Air Cleaner - Repro
1967 - 1973 Mercury Cougar
1967 - 1973 Ford Mustang
Round ring shaped gasket that goes on top of the carburetor. Protects and seals the carburetor to the air cleaner.

Buy

$4.69
Online Only Price

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...