Contact Us / Visit Us (click here)
Office/Warehouse Closed Jan 1, 2025.
International Customers Click Here [Updated 1/2025]
 

Need a certain date code? Send us an email and we will check it out for you but please do not make us spend valuable time searching unless you are ready to purchase today.


Search This Category:
Select layout:
Products 1-48 of 70
Bolt - 351C Intake - EACH - Repro
0
$0 Price: $2.45
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41356 -

Used intake manifold bolt for the Mercury Cougar or Ford Mustang equipped with the 351C engine. This item is sold individually.Ford part # 56145-S.

Bolt - Intake - BOSS 302 - EACH - Repro
0
$0 Price: $6.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41347 -

Reproduction intake manifold bolts for the Mercury Cougar Eliminator or the Ford BOSS Mustang equipped with the 302 BOSS engine. These units are sold individually.Replaces Ford part # 56146-S.

Bolt Set - Intake Manifold - 289-2V / 289-4V - Repro
0
$0 Price: $27.49
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41411 -

Set of 12 bolts for the intake manifold on any factory 1966-67 Ford 289 engine. AMK F-478.*Note - Excludes 1968 289 and 302 engines.

Bolt Set - Intake Manifold - 289-2V / 302-2V / 302-4V - Repro
0
$0 Price: $41.27
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 25913 -

Set of (12) 2 1/16" bolts / studs and nuts for the intake manifold on any factory 1968 Ford 289 or 302 engine. AMK F-479. *Note - Excludes 1967 289 engines.

Bolt Set - Intake Manifold - 351C-2V - Repro
0
$0 Price: $37.80
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 25908 -

Set of 12 bolts for the intake manifold on any factory 1970-74 Ford 351C-2V engine. AMK F-1313.*Note - Excludes 351C-4V and 351W engines.

Bolt Set - Intake Manifold - 351C-4V - Repro
0
$0 Price: $33.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14281 -

Set of 12 bolts for the intake manifold on any factory 1970-74 Ford 351C-4V engine. AMK F-1321.*Note - Excludes 351C-2V and 351W engines.

Bolt Set - Intake Manifold - 351W-2V / 351W-4V- Repro
0
$0 Price: $33.03
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12488 -

Set of 16 bolts for the intake manifold on any factory 1969-70 Ford 351W-2V and 351W-4V engine. AMK F-1131.*Note - Excludes all 351 Cleveland engines.

Bolt Set - Intake Manifold - 390-4V / 428CJ - Repro
0
$0 Price: $43.53
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11996 -

Set of 10 bolts and several spacers for the intake manifold on any factory 1967 Ford S or Z code, 390 engine. AMK F-475.*Note - Excludes 1968 1969 1970 - 390 and 428CJ engines.

Bolt Set - Intake Manifold - 390-4V / 428CJ- Repro
0
$0 Price: $44.37
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11273 -

Set of 12 bolts / spacers / stud for the intake manifold on any factory 1969-70 Ford S code 390-4V or 428 Cobra Jet or 428SCJ engine. AMK F-475.*Note - Excludes 1967-68 390 engines.

Bolt Set - Intake Manifold - 428CJ - Repro
0
$0 Price: $41.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 80222 -

Set of bolts and studs for the intake manifold on any 1970 Ford 428 Cobra Jet engine. The 1970 set includes a second double ended stud, while the 1969 set only includes 1 double stud. 1970 R and Q code Mustang and Cougar.Trivia - 1970 Mercury Cougars only have a Q as the 5th digit in the VIN code. Yes, All 1970 428 cobra jet Cougars are designated as Q codes. Ram air was optional and will show on the window sticker or Marti Report.

Bolt Set - Intake Manifold - 429CJ - Repro
0
$0 Price: $47.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 53276 -

Set of 20 bolts for the intake manifold on any 1970-71 Ford 429 Cobra Jet engine. 429CJ engines were optional in only in 1971 on Mercury Cougar and Ford Mustangs. Available in 1970 on B body Torino, Cyclone, Ranchero, Fairlane. *Note - Excludes Boss 429 engines.

Bolt Set - Intake Manifold - GT-E 427-4V / 428PI - Repro
0
$0 Price: $43.75
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 30918 -

Set of 20 bolts / studs, and nuts for the intake manifold on any factory 1968 Mercury Cougar GT-E 427-4V or 1968 Shelby GT-500 all with aluminum Police Interceptor intake manifold from Ford. AMK F-479.*Note - Excludes 1967 GT-500.

Carburetor Installation Nut - 5/16-24 - EACH - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33169 -

5/16-24 hex nut 7/16" head that is used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. Sold individually. AMK B-12786

Carburetor Installation Nuts - Set of 4 - Repro
0
$0 Price: $3.00
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 53278 -

This is a set of four 7/16 nuts that are used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. 

Carburetor Installation Stud Kit - Without Spacer - Repro
0
$0 Price: $12.60
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 53277 -

This is the complete eight piece kit that includes four 7/16 nuts and four studs (1 3/8") which are double threaded. One end is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with NO spacer.

Carburetor Installation Stud Kit For 1" Spacer - Repro
0
$0 Price: $12.05
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 53274 -

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (2 1/2"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with a 1" spacer.

Carburetor Installation Stud Kit For 1/4 - 3/8 Spacer Plates - Repro
0
$0 Price: $9.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 53275 -

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (1 3/4"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with 1/4" to 3/8" spacers.

Choke Gasket - 429CJ - Repro
1970 - 1971 Ford Torino 0
$0 Price: $26.87
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 22631 -

New reproduction of Ford part number D0OZ-9S500-A, Hi Temperature choke gasket for all 1970-71 429 Cobra Jet engines. Must utilize the stock Ford cast iron 429 Cobra Jet intake manifold. Fits J and C code 1971 Mercury Cougar and Ford Mustang, and J and C code 1970-71 Ford Torino, Ford Ranchero, Mercury Cyclone.*Note - Excludes 429 Super Cobra Jet engines which used a different intake manifold.

Choke Stove - 351C-2V Intake Manifold - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $39.87
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22234 -

Used cast iron choke stove from any 1970-73 351C-2V Ford engine. This is held on with 4 bolts, and to our knowledge no block off plate is reproduced. Casting number on the iron plate is D0AE-9A705-D, which is only for the plate. The plate and coiled tube assembly has a Ford part number of D0AZ-9C869-B. No hardware included.

Choke Stove - 351C-4V Intake Manifold - Used
1970 351C-4V Ford engines
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $115.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22235 -

Used cast iron choke stove from any 1970 351C-4V Ford engine. This is held on with 2 bolts. Casting number on the iron plate is D0AE-9A705-C, which is only for the plate. The plate and tube assembly has a Ford part number of D0AZ-9C869-A. No hardware included. Limited to stock on hand.* Note - for those who do not need the choke stove, a cast aluminum block off plate can be purchased through Summit.

Gasket Set - Intake Manifold 289-302 - Repro
0
$0 Price: $24.27
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10128 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1964-73 small block Ford engines with size 260/289/302 cubic inches. C code 289-2V, A code 289-4V, F code 302-2V, and J code 302-4V.*Note - Excludes 1969-70 Boss 302 engines.

Gasket Set - Intake Manifold 351C-2V - Repro
0
$0 Price: $28.76
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12815 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits all 1970-73 Ford 351C engines with 2 barrel intake manifolds 1969-70 Mercury Cougar and Ford Mustang with 351C-2V engines. This gasket set includes a metal pan gasket.Any doubts? 351 Windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 351W engines. *Note - Excludes 351C-4V Cleveland engines. ...

Gasket Set - Intake Manifold 351C-4V - Repro
0
$0 Price: $66.38
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12920 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits all 1970-73 Ford 351C engines with 4 barrel intake manifolds 1969-70 Mercury Cougar and Ford Mustang with 351C-4V engines. This gasket set includes a metal valley pan.Any doubts? 351 Windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 351W engines. *Note - Excludes 351C-2V Cleveland engines. ...

Gasket Set - Intake Manifold 351W - Repro
0
$0 Price: $30.49
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12096 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1969-73 small block Ford engines with size 351 cubic inches, Windsor engine only. 1969-70 Mercury Cougar and Ford Mustang with 351W engines.Any doubts? 351 windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 289/302 engines. *Note - Excludes 351C or 351 Cleveland engines.

Gasket Set - Intake Manifold 390/428CJ - Repro
0
$0 Price: $22.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12960 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1967-70 big block Ford engines with size 390, 427, or 428 cubic inches, FE engine only. 1967-70 Mercury Cougar, Ford and Ford Mustang.

Gasket Set - Intake Manifold 429CJ - Repro
Other 1971 429CJ 0
$0 Price: $47.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 32380 -

New gaskets for installing your 429 Cobra Jet intake manifold. This is the Felpro branded gasket. Fits 1970-71 Ford 429CJ engines. 1971 Mercury Cougar and Ford Mustang with J or C code 429CJ engines. Intake to cylinder head gaskets and intake end pieces, along with O ring for distributor. *Note - Excludes N code 429-4V or Thunderjet, passenger car engines.

Gasket Set - Intake Manifold Boss 302 - Repro
0
$0 Price: $56.95
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 13122 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1969-70  Boss 302 Ford engines. 1969-70 Mercury Cougar Eliminator and Ford Mustang with G code 302HO engines. *Note - Excludes 289 / 302 / 351C / 351W engines. 

Intake Manifold - 289-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $72.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23942 -

C6OE-9425-A Cast iron intake manifold used on all 1967 C code 289-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of C6OE-9425-A. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4AZ-9424-H. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

Intake Manifold - 289-2V / 302-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $87.89
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24341 -

C8AE-9425-B Cast iron intake manifold used on all 1968 C code 289-2V, and F code 302-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of C8AE-9425-B. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4AZ-9424-J. The 1966-67 289-2V intake is also a good alternate, see related items for that one.*Installation Tip - A 1 inch aluminum spacer...

Intake Manifold - 289-4V - Used
$0 Price: $187.88
Online Only Price

Details

Availability: Out of Stock
Item #: 23943 -

C6OE-9425-B Cast iron intake manifold used on all 1967 A code 289-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C6OE-9425-B. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4OZ-9424-G. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

Intake Manifold - 289-4V / 302-4V - Group II Shelby American COUGAR Lettered - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $2,426.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20531 -

Very rare over the counter, Group II dress up accessory item for any 289 / 302 small block engine. In excellent used condition with no cracks, stripped threads or corrosion damage. The nicest you will ever find. This over the counter Intake was marketed by Shelby American in the Cougar catalog titled "How To Sharpen Your Cat's Claws". Shelby casting number S2MS-9424-A. This intake is basically the same one you so often see with COBRA lettering on it. New to our inventory as of 12-15-2017, the...

Intake Manifold - 302-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $243.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24516 -

C8ZE-9425-A Cast iron intake manifold used on all 1968 J code 302-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C8ZE-9425-A. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C4OZ-9424-H. *Installation Tip - A 1 inch 4 barrel aluminum spacer plate with PCV provision is needed for proper air cleaner clearance.

Intake Manifold - 351C-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $72.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24997 -

D0AE-9425-M Cast iron intake manifold used on all 1970 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of D0AE-9425-M. Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D0AZ-9424-D. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. *Note - 351...

Intake Manifold - 351C-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $72.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25260 -

D1AE-9425-DA Cast iron intake manifold used on all 1971-72 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of D1AE-9425-DA. Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D1AZ-9424-D. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. *Note - 351...

Intake Manifold - 351C-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $72.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25554 -

D3AE-9425-CA Cast iron intake manifold used on all 1973 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of D3AE-9425-CA. Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D3AZ-9424-C. *Installation Tip - A spacer plate with EGR provision is needed for proper installation. *Note - 351 Cleveland engines only. ...

Intake Manifold - 351C-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $175.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24996 -

D0AE-9425-E, -H, or -L Cast iron intake manifold used on all 1970-71 M code 351-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of D0AE-9425-E, -H, or -L . Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D0AZ-9424-C. *Note - 351 Cleveland engines only.

Intake Manifold - 351C-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $145.89
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25594 -

Cast iron intake manifold used on all 1973 Q code 351-4V or 351CJ engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of D3ZE-9425-AA . Intake shipped bare, less choke stove, carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number D3ZZ-9424-A. *Note - 351 Cleveland engines only. *Installation Tip - A spacer plate with EGR provision is needed for proper installation. ...

Intake Manifold - 351W-2V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $119.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24600 -

C9OE-9425-A or -F Cast iron intake manifold used on all 1969-70 H code 351-2V engines in a Mercury Cougar or Ford Mustang. Stock 2 barrel intake manifold. Take off manifold with correct casting number of C9OE-9425-A or -F. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C9OZ-9424-A. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. *Note - 351...

Intake Manifold - 351W-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $296.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24599 -

C9OE-9425-B Cast iron intake manifold used on all M code 351-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C9OE-9425-B. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C9OZ-9424-B. Casting number can also be C9OE-9425-D, or C9OE-9425-E. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air...

Intake Manifold - 390-4V - Before 1/11/1967 - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $251.87
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31377 -

C6AE-9425-G Cast iron intake manifold used on very early 1967 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold, used before 1-11-1967. Take off manifold with correct casting number of C6AE-9425-G. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C6AZ-9424-N. This manifold will need to be cleaned and hot tanked prior to use. Current dates available: 6F22, 6L15. *Note -...

Intake Manifold - 390-4V - Before 9/11/1967 - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $297.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23995 -

C7AE-9425-E Cast iron intake manifold used on 1967 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold, used before 9-11-1967. Take off manifold with correct casting number of C7AE-9425-E. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C6AZ-9424-K. This manifold will need to be cleaned and hot tanked prior to use. Current dates available: 7A31, 7C27, 7D3,  *Trivia -...

Intake Manifold - 390-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $286.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24340 -

C8AE-9425-A Cast iron intake manifold used on all 1968 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C8AE-9425-A.  Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C8AZ-9424-A or -B. There is also a C8AE-9425-F version that we offer on another listing.  Current dates available: 7H12, 7H17, 7L10, 7L17,...

Intake Manifold - 390-4V - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $194.27
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32667 -

C8AE-9425-F Cast iron intake manifold used on all 1968 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with casting number of C8AE-9425-F. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C8AZ-9424-C. There are other versions of this "S" intake manifold with a suffix "A" letter.  Current dates available: 8A23. *Trivia - One of the heaviest car...

Intake Manifold - 427-4V Medium Riser - Blue Thunder - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $950.00
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33667 -

Lightly used intake manifold cast aluminum 427-4V medium riser. Blue Thunder casting 427MR-4V. Has the oil fill tube in front, dual plane, and the road draft provision in the back. Very tall manifold, likely to not fit under the stock hood of a Cougar or Mustang. Do your research on this, if you know, you know. We don't. Small portion on the driver side front has been lightly ground down, likely for a coil. No other issues noted. 

Intake Manifold - 428CJ - 9C25 / 0A19 - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $1,000.00
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24398 -

Used C8OE-9425-C Cast iron intake manifold used on all 1969 - 1970 Q and 1968 - 1970 R code 428CJ and 428SCJ engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold. Take off manifold with correct casting number of C8OE-9425-C . Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford part number C8OZ-9424-B.  Current date code is 9C25 or March 25, 1969 and 0A19 or January 19, 1970. *Trivia - One of the heaviest...

Intake Manifold - Holley Street Dominator - 351C - Used
0
$0 Price: $299.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33940 -

Used Holley Street Dominator intake manifold for the 70 - 73 Cougar or Mustang equipped with the 351C engine. Casting numbers:  701R-12, 300-12, 02233

Intake Manifold - Small Block - COBRA Lettered - Repro
0
$0 Price: $396.35
Online Only Price

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31558 -

Reproduction lightweight aluminum high performance intake manifold with the Cobra logo. This is an exact copy of the manifolds Carol Shelby offered on his Shelbys and Cobras in the late 1960's. Fits 260,289 and 302 engines.You can find the SHELBY lettered intake here. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. ...

Intake Manifold - Small Block - SHELBY Lettered - Repro
0
$0 Price: $396.35
Online Only Price

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31557 -

Reproduction lightweight aluminum high performance intake manifold with the Shelby logo. This is an exact copy of the manifolds Carol Shelby offered on his Shelbys and Cobras in the late 1960's. Fits 260,289 and 302 engines.You can find the COBRA lettered manifold here. *Installation Tip - A 1 inch aluminum spacer plate with PCV provision is needed for proper air cleaner clearance. ...

  • < Prev
United StatesClose
Flag of United States
Powered by
duty and tax information for United States