International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Featured!

Spotlight!

7-Blade Fan / Fan Clutch Kit - w/ Bolts - 428CJ / 428SCJ - Repro ~ 1967 - 1970 Merccury Cougar / 1967 - 1970 Ford Mustang

Reproduction fan blade / clutch / bolt kit for the 67 - 70 Cougar and Mustang.

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

Item #: 33661

Price: $302.62

Cost: 24210

Earns: 1211

Bonus: 0

Availability

In-Stock Item - Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

Description

Reproduction 7-blade fan, fan clutch, fan to clutch bolt kit, and water pump to clutch bolt kit for the 67 - 70 Cougar and Mustang.

This kit can be used to upgrade any 67-70 Cougar/Mustang small block that already has a 24" radiator to the big block cooling fans.

Also keep in mind our 1968-1970 big block clutch fans will fit a multitude of Ford products throughout the 1960's and 1970's, including but not limited to Galaxy, LTD, Ranchero, Marquis, Parklane, Cyclone, Fairlane, Monterey, Montclair, etc.

See photos above for detailed diagrams of the measurements so you can determine if this super duty fan will fit your application.

Check out our video below where Don reiterates the importance of upgrading your cooling kit

center>

Specifications:

Shipping Weight: 10.00 LBS

(weight shown may be the dimensional weight)

0 Reviews ( of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 1

Please login to ask a question.

Question

Rieger Asked:

I have a 68/302/C4.I did the cooling upgrade on a budget. I need the fan, clutch and bolts to finish it. Pricing the parts out appears to be cheaper by $23 rather than buying this combo. Why? Parts appear to be the same. Thx

August 17, 2024 5:16 PM

Answer

WCCC Admin Answered:

Thanks for bringing this to our attention. Our cost on the parts recently changed, and the price of the kit was supposed to automatically adjust to account for this, that apparently did not happen. We have updated the price.

August 19, 2024 2:29 PM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 53255 [More info]
[More info] Fan Shroud Installation Kit - Repro ~ 1967 - 1971 Mercury Cougar / 1967 - 1971 Ford Mustang
Fan shroud installation kit for 67 - 71 Cougars and Mustangs. Will fit 1971 Cobra Jet shrouds.

Buy

$7.15
Frequently
Purchased With

Item #: 19919 [More info]
[More info] Fan Shroud - Radiator - 302 / 351W - 24 Inch - Repro ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Replaces Ford part # C9OZ-8146-A. This is a quality, made in America reproduction made from the original Ford tooling. This is for the 24" radiator found on Mustang, Torino and Cougar with AC or for Cougars that...

Buy

$73.67
Frequently
Purchased With

Item #: 15284 [More info]
[More info] Ignition Coil - Yellow Top - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These replacement "Yellowtop" ignition coils are copies of the original. Nice reproduction cosmetically and functionally. This is a very prominent piece and a must have when trying to detail your engine compartment...

Buy

$47.35
Frequently
Purchased With

Item #: 33270 [More info]
[More info] Contact Set - Points - MOTORCRAFT - EACH - NOS ~ 1967 - 1973 Mercury Cougar - 1967 - 1973 Ford Mustang
A needed part for giving your car a tune-up.

Buy

$18.85
Frequently
Purchased With

Item #: 13685 [More info]
[More info] Bolt Kit - Water Pump - 390 / 428CJ - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
New Bolt kit, for the installation of a water pump on any Ford 352, 390, or 428CJ engine. Fits all 1967-70 Mercury Cougar and Ford Mustang with 390-4V, 390-2V, and 428 Cobra Jet engines.

Buy

$9.25
Frequently
Purchased With

Item #: 42059 [More info]
[More info] Spark Plug Wire Separator Kit - OE BLACK - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and...

Buy

$17.42
Frequently
Purchased With

Item #: 32881 [More info]
[More info] Distributor Primary Lead Wire - NOS ~ 1968 - 1973 Mercury Cougar / 1968 - 1973 Ford
NOS distributor lead wire with green boot for the coil. Direct replacement for 1968-73 Ford distributors. There were several colors of boots that go to the coil, this is a green one as shown. Ford part...

Buy

$35.85
Frequently
Purchased With

Item #: 19918 [More info]
[More info] Fan Shroud - Radiator - 390 / 427 GT-E / 428CJ / 351C 24 Inch - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Replaces Ford part # C8ZZ-8146-A. This is a good reproduction made from the original Ford tooling but does not have the original part number or FoMoCo lettering. Has a smooth texture (unlike original) but it is...

Buy

$72.75
Frequently
Purchased With

Item #: 42047 [More info]
[More info] Elbow - Water Inlet - 390 / 428CJ - GOLD ZINC - Repro ~ 1968 Mercury Cougar / 1968 Ford Mustang
Reproduction water inlet elbow for your 1968 big block Cougar or Mustang.Replaces Ford Part #: C8AZ-18599-AClick on images to enlarge....

Buy

$20.05
Frequently
Purchased With

Item #: 32882 [More info]
[More info] Distributor Ground Cable - NOS ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford
NOS distributor ground wire. Direct replacement for 1967-73 Ford distributors. New old stock cable for inside the distributor, non ferrous metal, brass? Ford part number D2AZ-12264-A.

Buy

$9.85
Frequently
Purchased With

Item #: 11670 [More info]
[More info] Rotor - Distributor - V8 - OEM - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Replaces Ford Part Number: B7A-12200-A / DR-5 And C5TZ-12200-A / DR-87 (Service Replacement)

Buy

$5.82
Frequently
Purchased With

Item #: 42055 [More info]
[More info] Spark Plug - Wire Separator - Valve Cover - BLACK - EACH - Repro ~ 1967 - 1972 Mercury Cougar / 1967 - 1972 Ford Mustang
Keeps spark plug wires neat and orderly. Mounts on valve covers. Replaces Ford Part #: B8Q-12297-A.

Buy

$1.45

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials