Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1729-1776 of 3185
$137.57 Price: $152.75

Buy Details

Availability: In-Stock Item
Item #: 31891 -

Lower pressure hose. High pressure hose from insulator to the control valve. 1967 Mercury Cougar Ford Mustang with S code 390-4V V-8 engines. All correct ribbing, striping, and crimping. Has correct colored protective sheathing. *Note - There are two halves to the pressure hose from the pump to the control valve. This is the upper half only. Please see part number 31890 for the lower section of pressure hose. Click this link for more clarity on power steering hoses: https://secure.cougarpa...

$179.99 Price: $231.75

Buy Details

Availability: In-Stock Item
Item #: 31890 -

C7ZA-3A719-B Upper pressure hose. High pressure hose from the pump to insulator. 1967 Mercury Cougar Ford Mustang with S code 390-4V V-8 engines. All correct ribbing, striping, and crimping. Has correct colored protective sheathing. *Note - There are two halves to the pressure hose from the pump to the control valve. This is the upper half only. Please see part number 31891 for the lower section of pressure hose. Click this link for more clarity on power steering hoses: https://secure.coug...

$0 Price: $126.86

Buy Details

Availability: In-Stock Item
Item #: 12214 -

Pair of correct power steering hoses for your 67-69 Cougar or Mustang. All correct ribbing, striping, and crimping. Hoses have 5/16" fittings. *Note: Cannot be used with the very early 1967 1/4" fittings on control valves and ram cylinders. *Note - Two different hoses attach between the control valve and the ram cylinder. Part numbers: C60A-3A717-A C60A-3A714-A

$49.99 Price: $63.65

Buy Details

Availability: In-Stock Item
Item #: 13723 -

C6OA-3A717-A pressure hose. Ram cylinder to control valve. All correct ribbing, striping, and crimping. Hose with 5/16 fittings used 1967-69 Mercury and Ford. *Note - Two different hoses attach between the control valve and the ram cylinder PS7U1B and PS4U1A. *Note can not be used with the very early 1967 1/4" fittings on control valves and ram cylinders.

$49.99 Price: $63.65

Buy Details

Availability: In-Stock Item
Item #: 13726 -

C6OA-3A714-A pressure hose. Control valve to ram cylinder. All correct ribbing, striping, and crimping. Hose with 5/16 fittings used 1967-69 Mercury and Ford. *Note can not be used with the very early 1967 1/4" fittings on control valves and ram cylinders. *Note - Two different hoses attach between the control valve and the ram cylinder PS7U1B and PS4U1A.

$0 Price: $47.18

Buy Details

Availability: In-Stock Item
Item #: 14333 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to stripping if you torque them to the specs called for by FORD. We do not recommend these hoses and can not stand behind them as they often will leak if not torqued to the proper...

$0 Price: $182.75

Buy Details

Availability: In-Stock Item
Item #: 32245 -

Reproduction multi-year power steering pump, 1967-69, and 1971-73, excludes 1970. When fully assembled you will notice that this year P/S pump has a centered fitting for the pressure hose on the back of the reservoir. Most factory 1970 Mercury Cougar and Ford Mustang have an offset fitting. The only 1970 exception is the R or Q code 428 Cobra Jet engines, they used this pump. Does not include dipstick. Manufacurers note: In place of the paper gaskets, it is recommended that you use gray atv...

$0 Price: $1,381.34

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 13619 -

Reproduction power window conversion for your Cougar or Mustang. These kits are easy to install and bolt into the original mounting holes, and use your existing window channels. Once you install the kit, your window crank becomes the switch. Simply lift up on the crank to roll the window up, and press down on the crank to roll the window down. Made from quality materials like 1018 cold rolled steel, Oilite thrust bearings at the pivot points and treated metal for all the gears makes for a high...

$0 Price: $772.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 13620 -

[No Description Provided]

$65.00 Price: $83.62

Buy Details

Availability: In-Stock Item
Item #: 41805 -

This after market adjustable proportioning valve is far superior to the original equipment. Fully adjustable for tuning front to rear brake bias. Requires some routing modifications of brake lines for proper fit. Includes adapter fittings. Replaces Ford part # C5ZZ-2B091-A, or C7OZ-2B091-B.Fits: 1967 Mercury Cougar 1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar 1973 Mercury Cougar 1967 Ford Mustang 1968 Ford Mustang 1969 Ford Mustang 1970...

$0 Price: $115.85

Buy Details

Availability: Out of Stock
Item #: 24042 -

Used proportioning valve for the 1967-68 Mercury Cougar or Ford Mustang. This is a cylindrical shaped brass valve, some times called the pressure control valve, brake valve or 'cigar' valve. For 1967 Cougars, this valve is most often found at the junction of the high pressure hose back at the rear end. 1968 had it connected to the distribution block on the driver side firewall. Will come with the C7OE-... stamped valve. Starting in 1969 the valves had a C9OE... Ford part number. These are used...

$69.99 Price: $88.18

Buy Details

Availability: In-Stock Item
Item #: 11953 -

Reproduction proportioning valve for the Mercury Cougar or Ford Mustang. This is a cylindrical shaped brass valve, some times called the pressure control valve, brake valve or 'cigar' valve. This valve is most often found at the junction of the high pressure hose back at the rear end, or later, found with the distribution block mounted on the driver side apron (inner fender). Replaces Ford part # C7OZ-2B091-B. Check out this video ...

$0 Price: $64.89

Buy Details

Availability: Out of Stock
Item #: 30371 -

This plastic protector sleeve is often missing or broken, but occasionally we come across a good used one. This part attaches just in front of / below the fuel tank on the passenger side, and serves two purposes: it routes the wiring closer to the fuel sending unit without it dangling down, and protects it from road debris This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

$0 Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23841 -

Used stamped steel single groove alternator pulley, typically these are described as being 2-7/8 inches in diameter. We find various casting numbers on them, such as: C5AF-10A352-F1, C5AF-10A352-G1, C5AF-10A352-K, C5AF-10A352-L.Replaces Ford part number C5AZ-10344-K.

$0 Price: $106.02

Buy Details

Availability: In-Stock Item
Item #: 31809 -

New crank shaft pulley with 2 sheaves for any 3 bolt, 289 / 302 / 351W engines with power steering and the single belt alternator pulley. Without air conditioning, and without emissions.   6-3/8" overall diameter, has 3/8 and 1/2 inch grooves for fan belts. Replica of the C7AE-6312-A crankshaft pulley by Ford. Double sheave 67 crank pulley.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23853 -

C5AZ-6312-E Application 289 engines with power steering and the single belt alternator pulley. Without air conditioning, and without emissions.   6 5/16" wide 3" deep to mounts.  Ford casting number C7AE-6312-A. Double sheave 67 crank pulley.

$0 Price: $134.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24018 -

C7AZ-6A312-A. Double or two groove crankshaft pulley. Ford casting number C7OE-6312-A. Double sheave 67 68 crank pulley. 6-1/8 inches in diameter. 1967 Application - Mercury or Ford 289 with automatic transmission and standard cooling (17 inch radiators). Without air conditioning and without power steering. 1968 Application - Mercury or Ford 289 or 302 with or without power steering. Thermactor emissions permissible. Ford casting number C7OE-6312-A. Double sheave 67 68 crank pulley. ...

$0 Price: $269.87

Buy Details

Availability: Out of Stock
Item #: 23794 -

Ford casting number C1AE-6312-A. Cast iron double sheave pulley. 6-5/8" and 6.00" in diameter. Ford cast number C1AE-6312-A. For use with power steering and air conditioning or with California thermactor emissions, either or, not both.

$0 Price: $148.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23864 -

Ford casting number C5TE-6312-A. Single cast iron pulley for use with California thermactor emissions and low mount dual alternator pulleys. No other options, just the DSO 52 and 53 California engines. Ford Master Part number C5TZ-6A312-A. 6-5/8 inches in diameter. Together with the inner crankshaft balancer pulley, these now paired pulleys drive both the water pump and alternator pulleys. The Thermactor air pump pulley is driven by the 3rd outer water pump pulley sheave - only. Must use the...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23851 -

Ford part number C5AZ-6312-B. Application for 1967-68 289 and 302 engines without all of the following; air conditioning, power steering, California thermactor smog. The alternator would also have a single sheave pulley. Ford casting number C5AE-6312-A. Single sheave crank shaft pulley. About 6-5/16 inches in diameter.

$0 Price: $72.86

Buy Details

Availability: In-Stock Item
Item #: 31810 -

NOTE* After comparing to the original pulley, we've found that this reproduction is approximately 3/16" shorter in overall height. New crank shaft pulley, single sheave small block Ford 289 / 302 351W engines up to 1969. Single V-belt or fan belt pulley, means for use with only the alternator. Not for use with power steering, air conditioning, or smog pump. Measures just under 6-1/4 inches in diameter. Single sheave crank shaft pulley with 3 bolt holes, excludes engines after 1970....

$0 Price: $68.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23852 -

C5AZ-6312-D Application for 1967-68 289 or 302 engines with air conditioning. Power steering and or California Thermactor emissions permissible. Ford casting number C5AE-B. Triple sheave 67 68 crank pulley. Inner diameters are about 6-1/2 inches, outer diameter is 7-5/16 inches.

$0 Price: $121.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23838 -

Casting number C5AE-D. Triple sheave pulley used with both air conditioning and thermactor emissions. Inner pulley fits over the harmonic balancer, largest pulley is 7-3/4 inches in diameter. *Note - with the inclusion of this larger diameter pulley you must use timing pointer part number C5AE-6023-A.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24010 -

Application 1967 - 1968 - 1969 Cougar with either 289 / 302 / 351w engines with air conditioning. After 9-11-66. Casting number 7AD. 5" diameter and a 3/8" sheave width.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23847 -

Application 289/390 engines without air conditioning. Casting number AC 4-7/8" diameter and a 7/16" sheave width.

$0 Price: $78.25

Buy Details

Availability: In-Stock Item
Item #: 31811 -

Application could be for any 1967-69 Ford 289 / 302 /351W, but with only a single alternator belt. This is a copy of the Ford 7AA power steering pulley. This pulley mounted correctly on an OEM pump with factory brackets, will run on the second V-belt from the inside. The inner most fan belt runs the alternator. You would be using a single belt on the alternator. Correct application is for 1969 with 351W engines. 5-1/4" diameter and 3/8" sheave width.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24013 -

Application, 1967 - 1968 - 1969 - 1970 390 / 428CJ engines with air conditioning. Casting number AF. 5-3/4" diameter and 5/16" sheave width.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33045 -

Application 289-4V auto and 289-2V manual transmissions at the beginning of the 1967 model year. Pulley diameter 4 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C6OZ-9B447-A and engineering number is C6OE-9B447-A or B. *California DSO 52 and DSO 53 only.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24047 -

1967 289-2V after 11/14/1966 without air conditioning. Pulley diameter is 4.75 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C7AZ-9B447-E. *California DSO 52 and DSO 53 only.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24228 -

Application 289-2V (C code engines) prior to 11/14/1966, 289-4V (A code engines) all without air conditioning. Pulley diameter 3.97 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C7AZ-9B447-A and engineering number is C7ZE-9B447-A. *California DSO 52 and DSO 53 only.

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23906 -

Application all 390-4V engines with and without air conditioning. 289-2V and 289-4V all with air conditioning. Pulley diameter is 5.95 inches 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C6AZ-9B447-E, engineering number as seen on the front of the pulley is C6AE-9B447-E. *California DSO 52 and DSO 53 only.

$0 Price: $49.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23856 -

C5AZ-8509-J For use originally on 1967 289 engines without power accessories. No air conditioning, no power steering, and standard 1 sheave alternators. Single belt pulley 6.10 inches in diameter. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2 inches.*This is one of the few water pump pulleys that did not have an imprinted casting number. Originally this pulley had an ink stamp. We will most likely be...

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21606 -

Water pump pulley 1 sheave, about 6.11 inches. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2 inches. Application include 1967 Cougar with 289. 1969 Cougar and Mustang with 390-4V. Also various Mustangs 1965-67, all with 289.Replaces Ford casting number C5OE-8509-A.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23922 -

For use originally on 1967 289 engines with California emissions (All 1967 DSO 52 and 53 Mercury Cougars), and without factory air conditioning. With extra cooling (20 inch wide radiator). 3 sheave pulley (three fan belts), with pulleys having diameters of 4-7/16 inches and 5-7/8 inches. Ford casting number C6OE-8509-A, was probably an ink stamp. These pulleys were made using a double sheave C6AE-8509-A pulley with a second smaller pulley welded on.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23923 -

C6AZ-8509-F With air conditioning. Power steering and or thermactor emissions possible. 2 sheaves or 2 fan belts with a diameter of about 5-5/16 inches. Ford casting number C6OE-8509-B.

$0 Price: $119.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24019 -

C7AZ-8509-E 289/302 Water Pump Pulley-Used C7AZ-8509-E Thermactor emission systems. Application also includes 1969 Boss 302 Eliminator. All applications are without air conditioning. With or without power steering. Triple sheave pulley all equal diameter at 6-7/16 inches. Ford casting number C7OE-8509-B. *1967 application with standard cooling (17 inch radiator) *After 11-13-1966

$0 Price: $76.45

Buy Details

Availability: In-Stock Item
Item #: 31812 -

For use originally on most 289/302/351w/390/428CJ engines with air conditioning from 1967-1970. 2 sheaves with a diameter of 5-7/8 inches. This is a good copy of the original water pump pulley, it has no stamped part number.Replaces   C6AZ-8509-A or C6AE-8509-A.

$0 Price: $115.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23919 -

C6AZ-8509-A For use originally on most 289/302/351w/390/428CJ engines with air conditioning from 1967-1970. Thermactor OK on any application. 2 sheaves with a diameter of 5-7/8 inches. Ford casting number C6AE-8509-A. *For year 1967 only > Notes say Prior to 1/9/1967.

$0 Price: $223.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41973 -

Usually ships in 3-5 business days. Replaces Ford Part #: C4DZ-7653337-A. This is a new part, not a rebuild, no core needed. Correct brackets for a Cougar, not a generic one size fits all application. 5 year warranty when used with automatic transmission fluid.

$0 Price: $29.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11068 -

Core power steering pump for the Mercury Cougar or Ford Mustang equipped with any V-8 engine. This unit is also for the 1970 Cougar or Mustang equipped with the 428CJ. These are bare pumps, stripped of pulleys, canisters, dip sticks, tags, and brackets. Suitable for core rebuilding. Typically these pumps would have been tagged with numbers which include: HBA-BF, HBA-BF1, HBA-BK, and HBA-BR. *Note - Excludes all 1970 cars with 351 or 302 engines. *NOTE* Core exchange not required. ...

$0 Price: $0.45

Buy Details

Availability: In-Stock Item
Item #: 11998 -

Push on retainer for heating and air conditioning box levers or shafts. Fits 3/16 inch studs or rods. In most cases you will also want to get a washer to go against the pinched stops. Probably fits most Ford products, not just 1967-73 Cougar and Mustang.Replaces Ford part number 383358-S.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31283 -

New push in retainer for any 1967-73 Mercury Cougar or Ford Mustang. These fasteners are used to attach the floor vent / duct to the blower housing, and to connect the defroster assembly to the blower housing, etc. Sold individually. These are all plastic with flush mounted head. Replaces Ford part number 380464-S.

$0 Price: $8.87

Buy Details

Availability: Out of Stock
Item #: 11-0293 -

Used push in retainer for any 1967-73 Mercury Cougar or Ford Mustang. These fasteners are used to attach the floor vent / duct to the blower housing, and to connect the defroster assembly to the blower housing, etc. Sold individually.Replaces Ford part number 380464-S.

$0 Price: $26.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0371 -

Driver side quarter window slide. This is the 10 1/2" slide that bolts to the inner body of the quarter window area.

$0 Price: $26.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0370 -

Passenger side quarter window slide. This is the 10 1/2" slide that bolts to the inner body of the quarter window area.

$0 Price: $39.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0240 -

Good used driver side (left hand) quarter window guide for the Mercury Cougar or Ford Mustang. Grade A will have no rust or erosion from moisture. This unit will have all three window stops and both window guides still attached. Riveted window stops have part number of C4ZB-6529838-A. Ford part # C7ZZ-6529753-A. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great...

$0 Price: $19.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0142 -

Good used driver side (left hand) quarter window guide for the Mercury Cougar or Ford Mustang. Grade B will have some rust or erosion from moisture, missing zinc plating. This unit will have all three window stops and both window guides still attached. Riveted window stops have part number of C4ZB-6529838-A. Ford part # C7ZZ-6529753-A. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our...