Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2881-2928 of 3337
$0 Price: $65.88

Buy Details

Availability: Out of Stock
Item #: 31917 -

Used battery tray, may not be exactly like the assembly line tray. Group 27 battery tray is typical for cars with air conditioning and higher amp alternators. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars. Used condition, minor pitting as shown. Replaces Ford Part #: D0OZ-10732-B.

$0 Price: $25.88

Buy Details

Availability: Out of Stock
Item #: 15-0057 -

Used upper steering column bearing for your 67 - 73 Cougar or Mustang. One required per car. Fixed Columns only use the upper bearing, while the tilt columns used an upper and lower. The used lower bearing can be found here. Outside diameter: 1 3/16 " * - may not fit some 67 Mustang applications with a fixed column as these used Ford part # C4OZ-3517-A, which is the same part used in the Fairlanes/Comets with a fixed column. To our knowledge this bearing is not currently reproduced. *NOTE* For...

$0 Price: $633.87

Buy Details

Availability: Out of Stock
Item #: 25582 -

Ford offered the 1973 Mercury Cougar hood emblem in two versions as a service replacement part. It is very rare to find them new in the box with the chrome center hood moulding, usually they are found without the chrome. This was found at the Spring 2007 Ford Carlisle show. Once its gone I doubt we will see another anytime soon. Keep in mind we are always looking for Texaco gas station memorabilia for trades! At this point we are mostly looking for poor condition signs. Will consider good...

$0 Price: $229.86

Buy Details

Availability: Out of Stock
Item #: 14159 -

Used grade "A" power window master switch bezel. One year only bezel for the Cougar. Good used part with woodgrain appliqué in place and good chrome.Ford engineering # D2AB-14527-A.

$0 Price: $109.89

Buy Details

Availability: Out of Stock
Item #: 54890 -

Used grade "B" power window master switch bezel. One year only bezel for the Cougar. Fair used part with woodgrain appliqué in place and pitted chrome. Ford engineering # D2AB-14527-A.

$0 Price: $125.55

Buy Details

Availability: Out of Stock, On Order
Item #: 19912 -

Here is a piece that will allow to install a modern DIN radio / CD player into your Mercury Cougar or Ford Mustang. No hacking or cutting required! *TRIVIA* Here's some alphabet soup for you. DIN stands for Duetch Industri Normen. An abbreviation for a standard in-dash radio measurement which is approximately 2 inches by 7 inches. The Germans starting using it to standardize the radio�??s in Audi�??s, BMW�??s, Mercedes, and VW�??s way back in the mid 80�?�s. ...

$0 Price: $169.88

Buy Details

Availability: In-Stock Item
Item #: 23892 -

C5ZZ-7610962-A Ford description of this plate is "Plate - Front floor lower cross member". All 1967-73 Cougar convertibles and all 1965-73 Ford Mustang convertibles use this plate. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. As you look at our picture below you will see the repro is about half the thickness. The repro is different in every detail but will work. We also have used plates with minor damage at a reduced cost.

$0 Price: $89.15

Buy Details

Availability: Out of Stock
Item #: 32000 -

Good reproduction reinforcing plate, contours are like the C5ZZ-7610962-A plate which was used through 1970. Thick steel like the originals, and with same contours. Bolts to the left hand and right hand lower floor reinforcement panels. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Replaces Ford Part # C5ZZ-7610962-A. The Ford description of this plate is "Plate - Front floor lower cross member". All 1969 - 1973...

$0 Price: $0.85

Buy Details

Availability: Out of Stock
Item #: 30964 -

Set of new bolts for attaching the floor shift bucket to the hump in the floor board, 1/4-20 bolts with washer head and 3/8 inch hex head. Sold as a set of 4 bolts. Fits all 1967 - 1973 Mercury Cougar and Ford Mustangs, and likely all of other floor shift Ford products from this time period. Check out our video on rebuilding your shifter below: ...

$0 Price: $59.27

Buy Details

Availability: Out of Stock
Item #: 32629 -

Driver side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel.  Ford part number D1ZZ-7653119-A.

$0 Price: $59.27

Buy Details

Availability: Out of Stock
Item #: 32630 -

Passenger side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel.  Ford part number D1ZZ-7653118-A.

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31306 -

Detachable mounting plate for installing the convertible ram cylinder to the convertible top frame assembly behind the quarter interior panel. Right and left are the same, fits all 1971-73 Mercury Cougar and Ford Mustang convertibles. Ford part number D1ZZ-76531A19-A.

$0 Price: $34.85

Buy Details

Availability: Out of Stock
Item #: 30739 -

Dash mounting speaker bracket for any 1971-73 Mercury Cougar or Ford Mustang. Typical with single center mounted in-dash speaker with AM radio.Ford part number D1ZA-19A054.

$0 Price: $8.87

Buy Details

Availability: Out of Stock
Item #: 25272 -

D1AZ-6788-A Metal tab that bolts to the intake manifold and has a hole for the round hose retaining ring (part number D2AZ-14A163-K). 1972-1973 all 351 engines, *Restoration Tip - These were painted Ford engine blue when the engines were painted, so paint it Dark Ford engine blue.

$0 Price: $55.89

Buy Details

Availability: Out of Stock
Item #: 25284 -

For restoration purposes, this bracket was factory painted satin black. May or may not have a stamped number of D1OA-3C511-AA. *This bracket can only be used in conjunction with an all steel pump mounting bracket. 71 72 73

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 30174 -

Weld in bracket for attaching the trunk lock striker on any 1971-73 Mercury Cougar, coupe or convertible. Majority of these have rust forming at the base where it meets the trunk floor. Removed from a rust free western Cougar. Ford part number D1WY-6543235-A.

$0 Price: $179.87

Buy Details

Availability: Out of Stock
Item #: 24616 -

C9OZ-2211-B Right hand rear brake backing plate for use with 2 inch wide brake shoes. Clean Western part with no heavy corrosion like you see on Eastern cars. Inspected for excessive wear. Used on cars with 10" drums.Originally manufactured by Kelsey-Hayes, KH part number 71085. Originally manufactured by Bendix, part number 317559.

$0 Price: $24.15

Buy Details

Availability: Out of Stock
Item #: 41920 -

Steel tubing features tin/lead coating and plated zinc chromate fitting and are exact copies of the originals with color coded fittings.

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 10742 -

Used brake pedal for the Mercury Cougar or Ford Mustang equipped with an automatic transmission and drum brakes. This is a short style pedal is for cars with four wheel manual drum brakes and is shipped bare.Ford part # D1ZZ-2455-C.

$0 Price: $105.89

Buy Details

Availability: Out of Stock
Item #: 25425 -

Used brake pedal for the Mercury Cougar or Ford Mustang equipped with a manual transmission and manual drum brakes.This unit features a shorter arm than power brake pedals and is for use with a clutch pedal. The picture may show hardware and pedal pad with trim, but the pedal is shipped bare.Ford part # D1ZZ-2455-D.

$0 Price: $187.97

Buy Details

Availability: Out of Stock
Item #: 25423 -

For use with a clutch pedal. Longer arm than drum brake pedals. Pedal shipped bare, picture may show hardware and pedal pad with trim. 1971-73 Mercury Cougar or Ford Mustang with 3 or 4 speed manual transmission and disc brakes.Replaces Ford part number D1ZZ-2455-A.

$0 Price: $158.85

Buy Details

Availability: Out of Stock
Item #: 53283 -

Driver side disc brake spindle for 1971-73 Mercury Cougar and Ford Mustang. Ford part number D1OZ-3106-A left hand or drivers side disc brake spindle. Guaranteed to be a flawless used part. Ford casting number D1ZA-3107-AA.Check out our restoration tips video: ...

$0 Price: $144.86

Buy Details

Availability: Out of Stock
Item #: 53282 -

Used driver side drum brake spindle for 1971-73 Mercury Cougar and Ford Mustang, as well as those mid sized Ford and Mercury's. Ford casting number D1OA-3108-AA.Check out our restoration tips video: ...

$0 Price: $199.85

Buy Details

Availability: Out of Stock
Item #: 19662 -

Good used passenger side (right hand) brake spindle for the Mercury Cougar or Ford Mustang equipped with front drum brakes. These are clean with no major rust and will also work on other mid sized Ford and Mercury products. Ford part # D1OA-3107-AA. Check out this video

$0 Price: $359.87

Buy Details

Availability: Out of Stock
Item #: 12385 -

Core driver side (left hand) and passenger side (right hand) pair of bucket seats with center seat release for the Mercury Cougar or Ford Mustang. The seat frame is the same in the standard, decor or XR7 and are the same driver to passenger side. The foam almost will always be deteriorating, or even missing, and will need to be recovered. These units will be solid core frames taken from a Western parts car. Seat tracks are sold separately. Seat hinge covers and hardware available...

$0 Price: $179.87

Buy Details

Availability: Out of Stock
Item #: 19711 -

Core driver side (left hand) bucket seat frame with center seat release for the Mercury Cougar or Ford Mustang. This unit is the same driver to passenger side. The foam almost will always be deteriorating, or even missing, and will need to be recovered. These will be solid core frames taken from a Western parts car. Seat tracks are sold separately. Seat hinge covers and hardware available separately. *NOTE* Want to save on shipping? If you only need the bottom portion of the bucket...

$0 Price: $70.07

Buy Details

Availability: Out of Stock
Item #: 32383 -

Grade A used driver side bucket seat textured plastic trim panel. Available in black, blue, red, ginger, avocado, green, and white. Please specify in the notes your desired color, ginger seems to be the most prolific color, the others may or may not be available. Grade A will not be chalky or have major scuffs or scratches. Various Ford part numbers associated with this panel, here are a few: D12B-6260763, D3ZB-6561633, D1FZ-6260763, D2ZZ-6260763, and D3ZZ-6560763. We also have B...

$0 Price: $70.07

Buy Details

Availability: Out of Stock
Item #: 32381 -

Grade A used passenger side bucket seat textured plastic trim panel. Available in black, blue, red, ginger, avocado, green, and white. Please specify in the notes your desired color, ginger seems to be the most prolific color, the others may or may not be available. Grade A will not be chalky or have major scuffs or scratches. Various Ford part numbers associated with this panel, here are a few: D12B-6260762, D3ZB-6561632, D1FZ-6260762, D2ZZ-6260762, and D3ZZ-6560762. We also...

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 14-0072 -

Female buckle end seat belt for the 73 Cougar or Mustang. The face plate and spring assembly have been replaced on this belt, and has an aftermarket starburst button decal. The originals had the olive branch decal.  This is the actual belt you will receive. Measures 11-1/2" This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by...

$0 Price: $765.85

Buy Details

Availability: Out of Stock
Item #: 42516 -

FYI: We do not plate, paint, or prep the backside of these bumpers as they were not done that way from the factory. (Above are examples of the mirror-like shine you can expect. 1969 front bumper shown out in the sun.) These are very sought after and a rare find without the impact strip holes, therefore we cannot guarantee we will have a core available for purchase. These bumpers are re-chromed using the triple plating process. This produces a significantly higher quality finished product...

$0 Price: $765.85

Buy Details

Availability: Out of Stock
Item #: 12614 -

This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 19773 -

Rear bumper filler for any 1973 Mercury Cougar.No chips or cracks. Does not come with fasteners or clips.See related items for new aftermarket style clips for attaching, 8 total are needed.Replaces Ford part number D3WY-17808-A .* Note - Will not fit 1971-72 Mercury Cougar.

$0 Price: $55.89

Buy Details

Availability: Out of Stock
Item #: 25558 -

D3AZ-17A812-A Front bumper guard rubber pad used prior to September 5, 1972, on a 1973 Mercury Cougar. The early front bumper guards had a narrow rubber pad early on. The rear flat surface measures 3/4 inches wide. Same rubber strip either right or left side. Hard to find without some scaring on the rubber. This pad is not nearly as common as the wider one which measures about 1-1/8 inches wide.Replaces Ford part number D3AB-17A812-A.

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 25559 -

D3AZ-17A812-B Front bumper guard rubber pad used after September 5, 1972, on a 1973 Mercury Cougar. These later front bumper guards have a rubber pad that measures 1-1/8 inches wide on the flat rear surface. Same rubber strip either right or left side. Hard to find without some scaring on the rubber. This pad is more common than the thinner 3/4 inches wide pad.Replaces Ford part number D3AB-17A812-B.

$1.20 Price: $3.85

Buy Details

Availability: Out of Stock
Item #: 32778 -

(7526) Nylon plastic injected. New Old Stock. Protects clutch equalizer and rod, and removes excess play. These are to put on either end of your clutch pedal rod. Sold individually. If your going to do both ends you will need to order 2 of these. Replaces Ford Part #: C0AZ-7526-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where...

$0 Price: $31.85

Buy Details

Availability: Out of Stock
Item #: 15253 -

This kit is for the clutch equalizer or clutch Z-bar on 1971-73 Mercury Cougars or Ford Mustangs, all V8 engines. All parts included as shown. *Tip - Add a liberal amount of grease to these parts during installation.

$0 Price: $1.89

Buy Details

Availability: Out of Stock
Item #: 15-0197 -

This clip goes on the upper end of your column and keeps your steering shaft from moving around when you pull up on your steering wheel.See item 31804 for new clip.

$0 Price: $9.15

Buy Details

Availability: Out of Stock, On Order
Item #: 13945 -

This passenger side (right hand) reproduction emergency / parking brake cable idler bracket mounts to the right front floor pan. The idler bracket is often discarded when the floor pan is removed for replacement. We also have good used units in stock for those that desire 100% correctness.

$0 Price: $95.00

Buy Details

Availability: Rare / NOS Part
Item #: 33238 -

New Old Stock cable for any 1971-73 Mercury Cougar. Cable only, handle needs to be replaced from your unit. Drift pin hold it onto the cable. Reuse your bezel too. Ford Part Number: D1WY-2760-A or D1WY-2A760-A This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not...

$0 Price: $40.37

Buy Details

Availability: Out of Stock
Item #: 32716 -

This used emergency / parking brake cable connector is for the Mercury Cougar only. That is because it is longer than the Mustang version due to the Cougar's longer wheelbase. This connector connects the two ball ends of the long and short emergency brake cables. Ford part # C7WY-2A790-A.

$0 Price: $589.86

Buy Details

Availability: Out of Stock
Item #: 24498 -

Very rare find in the original service replacement boxes dated 10-07-75. Sold as a pair.Ford part # C8WY-65502B20-A.Click on images to enlarge. ...

$0 Price: $131.27

Buy Details

Availability: Out of Stock
Item #: 25556 -

1973 351-2V Motorcraft 2100 Carburetor, automatic transmissions - both FMX and C6. D3AF-DC stamped on the carburetor base, spreadbore design of 351 cfm. Rebuildable core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. *Trivia - all 1973 Cougars with a H code 351-2V engine were automatics, no manual transmissions built.

$0 Price: $243.77

Buy Details

Availability: Out of Stock
Item #: 25599 -

1973 351CJ-4V Motorcraft 4300D Carburetor, automatic C6 transmission- 50 states. D3ZF-MA stamped on the carburetor base, spreadbore design of 715 cfm. Rebuildable core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top.

$0 Price: $600.17

Buy Details

Availability: Out of Stock
Item #: 25598 -

1973 351CJ-4V Motorcraft 4300D Carburetor, 4 speed manual transmissions- 50 states. D3ZF-LA stamped on the carburetor base, spread-bore design of 715 cfm. Rebuildable core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. This unit was actually rebuilt and never used.

$0 Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 25595 -

D3ZE-9A589-AB Factory 1973 Autolite / Motorcraft 4300 Carburetor spacer plate with attached EGR valve. The exhaust gas recirculation valves started showing up on American cars in 1973. There will be almost always some erosion from the heated exhaust gases. This is for use with the Motorcraft 4300 carburetor with Ford part number D3ZF-MA.

$0 Price: $24.85

Buy Details

Availability: Out of Stock
Item #: 33257 -

New Old Stock console lid catch. Plastic piece that screws to the underside lid of your late 1970-73 Mercury Cougar or 1970-78 Ford Mustang. Yep, used on Mustang II's, too.  Ford part number D0ZZ-63060A96-B and stamped into the plastic D0ZB-63060A96-B ...

$0 Price: $165.85

Buy Details

Availability: Out of Stock
Item #: 42156 -

Set of 4 Chrome center caps with Blue background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. The Magnum 500 wheel was not available on the Mercury line-up until 1974 and it came with a red center cap, star-burst pattern, made from plastic. This brand new to the market cap is a great alternative for the many folks wanting to run an attractive, era correct looking...

$0 Price: $141.05

Buy Details

Availability: Out of Stock
Item #: 42160 -

Set of 4 Chrome center caps with red background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...