Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1105-1152 of 3337
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26680 -

Reproduction fuel line to side apron grommet for the Mercury Cougar or Ford Mustang. 3 needed per car.Replaces Ford part # D1ZZ-9288.

$0 Price: $38.35

Buy Details

Availability: In-Stock Item
Item #: 13083 -

Reproduction fuel pump for all 1970-73 Mercury Cougars and Ford Mustangs equipped with the 351 Cleveland engine. 

$0 Price: $2.35

Buy Details

Availability: In-Stock Item
Item #: 10633 -

New replacement carburetor mounting gasket for 1970-73 Ford 351C or 351 Cleveland engines. Mounts between the fuel pump housing and the engine.

MSRP:$119.99
$119.99 Price: $109.15

Buy Details

Availability: In-Stock Item
Item #: 18900 -

Exclusive to WCCC, here's our reproduction in-tank, fuel sending unit with the low fuel option. Good for all 1971 - 1973 Mercury Cougar XR7's and all Ford Mustangs with 16 gallon fuel tanks. This is a reproduction of a 1971 fuel sending unit with three prongs (2 electrical and 1 alignment prong). The original Ford casting number was D1WF-9275-AC. This unit comes with a new 3/8 inch filter, brass float, and sending unit gasket. These are completely interchangeable on all 1971 - 1973 20 gallon...

MSRP:$45.00
$45.00 Price: $41.85

Buy Details

Availability: In-Stock Item
Item #: 13771 -

This is the two prong version fuel sending unit for 71 - 73 Cougars and Mustangs. The reason for the two prong, is that this particular year used a ground wire coming off of the sending unit. Cougars equipped with the convenience control package, and the XR7's used a three prong version. The function however is not as good as original but adequate and usually will work for years. If you have an original, often times it's just the float that needs replacing, so don't be quick to discard your...

$0 Price: $49.85

Buy Details

Availability: In-Stock Item
Item #: 10119 -

This is the stainless steel, two prong version fuel sending unit for 71 - 73 Cougars and Mustangs. The reason for the two prong, is that this particular year used a ground wire coming off of the sending unit. Cougars equipped with the convenience control package, and the XR7's used a three prong version. These units are better than original being made from stainless. The function however is not as good as original but adequate and usually will work for years. If you have an original, often...

$0 Price: $168.93

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 13072 -

Reproduction fuel tank for the 71 - 73 Mercury Cougar. 20 gallon capacity, correct in every way. Beware that the Mustang tanks sold by most vendors has a different filler neck angle that doesn't fit Cougars. Replaces Ford part #: D1WY-9002-A ...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25378 -

We prefer local pick-up only on these used 20 gallon fuel / gas tanks as we cannot ship anything that smells like fuel.

$0 Price: $57.35

Buy Details

Availability: In-Stock Item
Item #: 31328 -

Ford called this part the fuel vapor separator. It mounts to the top of the fuel tank. This is part of the emissions control smog system, the fuel vapors that are collected in the charcoal canister are returned through a hose to this device into the fuel tank. Applications for this part include: 1971-73 Mercury Cougar and Ford Mustang, 1971-72 Pinto and Bobcat, 1971-72 Maverick and Comet, 1971 Thunderbird and Lincoln MKIII, and 1971-73 Ford / Mercury full sized cars. Starting about 1973, this...

$0 Price: $52.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10353 -

Ford called this part the fuel vapor separator. It mounts to the top of the fuel tank. This is part of the emissions control smog system, the fuel vapors that are collected in the charcoal canister are returned through a hose to this device into the fuel tank. Applications for this part include: 1971-73 Mercury Cougar and Ford Mustang, 1971-72 Pinto and Bobcat, 1971-72 Maverick and Comet, 1971 Thunderbird and Lincoln MKIII, and 1971-73 Ford / Mercury full sized cars. Starting about 1973, this...

$0 Price: $125.55

Buy Details

Availability: In-Stock Item
Item #: 15480 -

This is our reproduction, uncut, driver side (left hand), long, front and rear floor pan for your Mercury Cougar convertible.

$0 Price: $125.55

Buy Details

Availability: In-Stock Item
Item #: 15481 -

This is our reproduction, uncut, passenger side (right hand), long, front and rear floor pan for your Mercury Cougar convertible.

$0 Price: $99.00

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15478 -

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

$0 Price: $109.67

Buy Details

Availability: In-Stock Item
Item #: 11684 -

Reproduction full length driver side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years. Hi, and sincerely thanks for all help I've received from WCCC during my (mega) 1968 restoration project. If everyone would be that helpful, the world would be a much better place. ;-) My car is almost ready for the road, but - as always - there...

$0 Price: $99.00

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15479 -

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

$0 Price: $109.67

Buy Details

Availability: In-Stock Item
Item #: 11683 -

Reproduction full length passenger side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years.

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10278 -

C8OZ-14A187-A Unique 1/4"-20 bolt for attaching the fuse blocks. 69 70 71 72 73 Mercury Cougar Ford Mustang fuse panel attaching bolt. Includes "C" clip and spring as shown. "C" clip keeps the bolt in the black fuse block.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10277 -

D1ZZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness.72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

$0 Price: $46.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10280 -

D1ZZ-14A068-A GRADE B Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

$0 Price: $7.85

Buy Details

Availability: Rare / NOS Part
Item #: 33325 -

New Old Stock Ford small block Ford distributor shaft to engine block gasket, made of rubber. Fits all 260, 289, 302, 351w, 351c engines. 1959-76. This is a "O" ring rubber washer. Will not fit big block FE, 360, 390, 410, 427, 428 engines. Ford part number B9TF-12143-A.

$0 Price: $4.85

Buy Details

Availability: Rare / NOS Part
Item #: 32883 -

New Old Stock Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

$0 Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 10619 -

Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26656 -

Made from fuel resistant cork like original.  Modeled off the Mustang \ 69 Cougar gasket which has 5 screws (67-68 Cougar only used 4 screws), but works for any 67-73 Mustang / Cougar. For 67-68 Cougar applications you will have to just screw through the cork. We can say with out a doubt, that in both Dearborn and San Jose, the factory workers did not use the pre-drilled holes when installing the fuel filler necks. We have suggested that the supplier not make them with holes. Probably...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26627 -

Door lock and trunk lock gasket as found on all 1969-73 Mercury Cougar. Gasket used to seal the lock cylinders to the exterior door on all 1967 - 1973 Mercury Cougar and Ford Mustang as well as the trunk lock gasket on all 1969-73 Mercury Cougar. It is not used for the trunk lock cylinder on the 1967 - 1968 Mercury Cougar because they uses a flip up trunk lock cover that instead uses a gasket between the covers housing and the trunk. Replaces Ford part #C7AZ-6243625.

$0 Price: $32.00

Buy Details

Availability: In-Stock Item
Item #: 15381 -

Rubber coated fiber oil pan gasket for the 351 Cleveland engine in the 1970, 1971, 1972 and 1973 Mercury Cougar or Ford Mustang.

$0 Price: $59.58

Buy Details

Availability: In-Stock Item
Item #: 15380 -

One piece molded rubber gasket with metal core. Keeps the rails flat and rigid, and prevents damage from over-tightening. Made by Fel-Pro. Oil pan SnapUps are included for easy mounting. This is by far the best oil pan gasket on the market.

$0 Price: $2.27

Buy Details

Availability: In-Stock Item
Item #: 13002 -

New outer axle gasket for any 8 or 9 inch Ford rear end with 28 splined axles. Common on all Mercury Cougar and Ford Mustang with V-8 engines. Excludes 31 splined axles as found on Boss and Cobra Jet cars. One required per side, two per car.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 25724 -

Adhesive-Backed Gasket Material Helps Prevent Breaking of Water Outlet. Gasket Cement is Not Needed. Self-Adhesive Backing Holds Thermostat in Place While Water Outlet is Being Installed.

$0 Price: $28.76

Buy Details

Availability: Out of Stock
Item #: 12815 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits all 1970-73 Ford 351C engines with 2 barrel intake manifolds 1969-70 Mercury Cougar and Ford Mustang with 351C-2V engines. This gasket set includes a metal pan gasket.Any doubts? 351 Windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 351W engines. *Note - Excludes 351C-4V Cleveland engines. ...

$0 Price: $66.38

Buy Details

Availability: In-Stock Item
Item #: 12920 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits all 1970-73 Ford 351C engines with 4 barrel intake manifolds 1969-70 Mercury Cougar and Ford Mustang with 351C-4V engines. This gasket set includes a metal valley pan.Any doubts? 351 Windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 351W engines. *Note - Excludes 351C-2V Cleveland engines. ...

$0 Price: $23.27

Buy Details

Availability: In-Stock Item
Item #: 10627 -

New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.

$0 Price: $22.86

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 10629 -

New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.

$0 Price: $5.25

Buy Details

Availability: In-Stock Item
Item #: 10848 -

Cork gasket for the disc brake splash shield. Fits all 1968-73 Mercury Cougar and Mustang and 1968-71 Ford mid size including Torino, Cyclone, Ranchero, Fairlane.Replaces Ford part number C8OZ-2B160-A.

$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 30555 -

Reproduction pair of taillight lens to housing gaskets for the 71 - 73 Mercury Cougar.