Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 529-576 of 819
$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 11391 -

Dimensionally correct reproduction that will allow you to use an original XR7-G remote mirror or the manual mirror found on the Hurst Oldsmobile or AMC Rambler Scrambler. Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $491.27

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11389 -

This driver side (left hand) remote mirror was used only on the 1968 XR7-G Cougar and is a direct bolt on for any 1967-68 Cougar and uses the same mirror base gasket. It comes ready to install with the exception of correct adapter base that we sell separate. The casting and chrome are good quality here, the only thing we find issue with is the quality of the mirror lens and the fact that the lens is rather loose in its setting. It does hold its position well as you drive down the road. Do you...

$0 Price: $1,074.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20015 -

Good used external XR7-G driver side (left hand) rear view mirror with its adapter base, lens, and cables all in good used condition.  Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 26213 -

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $1.92

Buy Details

Availability: In-Stock Item
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

$43.00 Price: $62.05

Buy Details

Availability: In-Stock Item
Item #: 11842 -

5/16" thick sound deadening and heat reflecting material, comes in a 4' X 6' sheet that can be cut to fit. This insulation consists of two layers of polyethylene bubble film sandwiched between two layers of aluminum foil. Temperature range rated -60 deg. F. to 180 deg. F. Combining this with the tar-based sound deadener underlayment will result in similar sound deadening as the OEM sound deadener.Below is listed how many rolls you will need to underlay the sections of a Cougar:  Area...

$0 Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 25937 -

This aluminum backed, tar sound deadener with adhesive is approximately 1/16 of an inch thick and works well behind door panels, at the firewall and under the headliner as a sound, heat and vapor barrier. One sheet required per door. Cut to fit, then remove paper backing to reveal adhesive, and stick in place. Comes in a 36 inch tall by 50 inch wide roll. *NOTE* Use caution when working with this product. The thin sheet of aluminum is quite sharp. We highly recommend using gloves. Before...

$0 Price: $27.27

Buy Details

Availability: In-Stock Item
Item #: 33592 -

This unique little adapter was used on XR7G models equipped with a sunroof. This reproduction is bare metal and will not be wrapped in leather like the originals.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30464 -

This unique little adapter was used on XR7G models equipped with a sunroof. Hand wrapped in the same leather as your center console.

$0 Price: $34.09

Buy Details

Availability: In-Stock Item
Item #: 33055 -

Pair of reproduction sway bar mounting spacer plates, to be used with the 15/16 inch sway bar found on 427 4V / 428CJ / BOSS 302 cars.Mounts between the bracket and the frame mount.

$0 Price: $17.87

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15318 -

This spring does NOT have correct spring finish or tension, but will work fine if you want to save a few $$$. Above is a comparison to this reproduction which is carried by other retailers, compared to our spring which is very close to the correct finish, length, and tension. Replaces Ford Part # : C8ZZ-17119-A ...

$0 Price: $990.77

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30650 -

Original space saver tire from a 1968-70 Mercury Cougar or Ford Mustang with the elusive 7.35-14 size. These were optional in 1968-70. One RARE unit! Just looking for a space saver spare? We have much lower priced space savers with different sized / marked tires, and some with dual valve stems from the 1970's. Please inquire.Just the tire, perfect for someone who has a dated wheel.*NOTE* Does not include inflator bottle and valve caps are usually missing. ...

$0 Price: $16.75

Buy Details

Availability: In-Stock Item
Item #: 20551 -

10 5/8" Spare Tire Mounting Bolt. Not 100% correct, but close replacement for the 1969 - 1973 with the 10 3/4" spare tire mounting bolt. Diameter 7/16" Replaces Ford Part #: C8ZZ-1448-A, D0ZZ-1448-A & D1ZZ-1448-A.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26121 -

The four part, die cast vinyl top trim kit requires 17 (right rear under back glass is the odd ball that requires five fasteners) of these speed nut fasteners. These do not work in conjunction with the various dealer installed aluminum vinyl top mouldings. *NOTE* The factory nuts had a drop of silicone or trim adhesive inside the bowl that acted as a seal. This procedure is advised for reinstallation.

$0 Price: $56.48

Buy Details

Availability: In-Stock Item
Item #: 13608 -

Finally, correct Cougar splash shields! For years, all we had were the Mustang versions that didn't fit right. These are contoured just like the originals to fit your Cougar's fenders. Made from a nice reinforced rubber compound, these are great replacements for your cracked, broken originals. Salvage your original metal brackets and attach these new seals. 1967 and 1968 are different. Staples included.

$0 Price: $148.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 31375 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. A lower front chin spoiler / air dam was never an option for the 1967-68...

$0 Price: $17.05

Buy Details

Availability: In-Stock Item
Item #: 41710 -

Very close to correct spring finish (dark color) and tension. Above is a comparison to the other reproduction, which does not have the correct finish, is not the correct length, and does not have the correct tension. Replaces Ford Part # : C8ZZ-17119-A *Note* Must be used with the correct mounting bracket. See below. ...

$0 Price: $36.36

Buy Details

Availability: In-Stock Item
Item #: 11339 -

Reproduction hood hinge spring for all 1967-69 Mercury Cougars and 1964-70 Ford Mustangs. Common on many Ford and Mercury cars, this spring has 14 coils like the originals. We've found these springs to be of lesser quality than the originals, and they will stretch over time and not hold the hood up very well. We highly recommend you stick with original OEM springs. No returns on these springs. Click here to see our listing for good used originals. Replaces Ford part # C3OZ-16789-A. You can...

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23817 -

Coil hood hinge spring, 5-13/32" in overall length, 14 coils, coil diameter 1.899 inches. Sold individually, one per side. Other applications include:  1967-69 Mercury Cougar1967-70 Ford Mustang1965-69 Torino, Fairlane, Ranchero1965-70 Falcon 1965-66 Falcon Ranchero Ford part # C3OZ-16789-A. You can find the hood hinge apron nuts here.Anghel Restorations offers a very detailed breakdown of the differences in the Cougar and Mustang hood hinges. ...

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20266 -

This spring has two functions. The first is to connect the rod that opens the latch to the deck lock cylinder. The second is to put tension on the cylinder so as to return the key to its perpendicular resting place after unlocking the deck lid. Check out this video

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18907 -

Used pair of diagonal support / stabilizing brackets for the 67 - 68 Cougar. The bars are located behind your back seat and help with stabilizing the car and to prevent the body from torquing or twisting. For added support we recommend installing our seat divider panel. These brackets will be cut out of a scrap car and sent to you as is and will need to be trimmed and cleaned up for paint. Check out our video on front suspension and chassis upgrades below: ...

$0 Price: $143.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24169 -

Best of the best in Western sheet metal! Just sand, paint, and install. This unit is also known as a bumper filler, rock guard, or filler panelFord part # C7WY-17779-A.

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24170 -

Price does not always dictate value... Our grade "B" stone deflectors have very minimal, easy to fix damage. The damage is most often found on the corners and would be hard to detect often times even if you chose not to fix them at all. Due to the flat, simple design of these stone deflectors most people with little or no experience in body work would be capable of making them look new again. We guarantee you will not find and rust (other than surface) and no signs of excessive filler. We have...

$0 Price: $143.87

Buy Details

Availability: In-Stock Item
Item #: 32222 -

Reproduction stone guard for the 67 - 68 Cougar. Also known as a bumper filler, rock guard, or filler panel.Replaces Ford part # C7WY-17779-A.

$0 Price: $81.85

Buy Details

Availability: In-Stock Item
Item #: 41626 -

Reproduction driver side (left hand) strut rod brace / support for Mercury Cougar and Ford Mustang.Replaces Ford # C8ZZ-03487-A.

$0 Price: $81.85

Buy Details

Availability: In-Stock Item
Item #: 41528 -

Reproduction passenger side (right hand) strut rod brace / support for Mercury Cougar and Ford Mustang.Replaces Ford # C8ZZ-03486-A.

$0 Price: $313.13

Buy Details

Availability: In-Stock Item
Item #: 33829 -

Pair of reproduction sub frame connectors, designed to tuck up against the floor pan as tightly as possible to maximize ground clearance. The more performance improvements you do to the vehicle, the more demands are put on the uni-body. Sub frame connectors provide resistance to chassis flex, therefore increasing the integrity and rigidity of the chassis. Installing them will also help reduce rattles and squeaks from the car flexing over rough roads.They are a must for any performance...

$0 Price: $21.75

Buy Details

Availability: In-Stock Item
Item #: 13811 -

This is the 1968 Cougar visor bracket. Not an exact match for 1971 - 1973, but will work. The hole spacing and distance from the windshield is identical to that on the 71-73, the bracket is just 1/8" longer on the side that actually holds the visor tip. This unit is only available in black or neutral. We have most other unfaded colors in used. This item works for 68 Cougar Coupe, 68 Mustang Coupe / Convertible and 71-73 Cougar Convertibles. Replaces Ford Part # C8ZZ-6204132, C8ZZ-17690 OR...

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 10749 -

Used 2 hole front mount center bracket for the sun visors in the 69 - 70 Mercury Cougar or 68 - 70 Ford Mustang convertible. The Master Parts Catalog (MPC) shows a specific part for the convertibles, but we have found three different styles of the sun visor arm clips used in the 68 - 70 convertibles.  Casting# C8OB-6304132-A has no dividerCasting# C8ZB-6504132-A has a partial divider (Most Common)Casting# C8ZB-6504132-B has a complete divider.  The colors don't always...

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31928 -

For the purists out there we have a very limited amount of used moon crater visors that have no impressions, seam separation and minimal rust on the clips if any.Please indicate the color desired and we will try to accommodate but painting might be required.Sold individually.

$0 Price: $56.45-$100.07

Buy Details

Availability: In-Stock Item
Item #: 67_Moon_Crater_Visors -

Reproduction Moon Crater Sun Visor for the 1967 and 1968 Mercury Cougar / Ford Mustang. Visors are fully padded and covered with the correct textured moon skin to match the headliner. Sold as a Pair. Nugget Gold is not available in Moon Skin Crater, it is only available in a smooth vinyl.

$0 Price: $85.85

Buy Details

Availability: In-Stock Item
Item #: 20651 -

This 4 1/2" long flexible drive cable connects the Bosch "sardine can" motor to the gear box drive assembly. Limited supply. Check out this vintage XR7G television commercial ...

$0 Price: $476.87

Buy Details

Availability: Out of Stock
Item #: 32469 -

Used 1968 Mercury Cougar sunroof motor access panel. This panel is covered by the headliner, but can be dropped down (headliner is glued to the panel) to access the sunroof motor. Will always have a multiple, repairable cracks, but is still functional.  This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our...

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24142 -

This is the Left hand or driver side spring that holds the rear license plate or fuel door in the upright position. Fits all years of Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-B

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24141 -

This is the right hand or passenger side spring that holds the rear license plate or fuel door in the upright position. Fits 1967-68 and 1971-73 Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-A

$0 Price: FREE

Buy Details

Availability: Download
Item #: 33850 -

Here is our free 7MB download for the 1967 - 1972 Mercury Cougar suspension diagram.

$32.00 Price: $41.85

Buy Details

Availability: Rare / NOS Part
Item #: 32726 -

New Old Stock Motorcraft 2 prong door jamb switch 3/4 inch door jamb mounting holes. Passenger side switch courtesy light switch, for use on 1971-73 Mercury Cougar and Ford Mustang without automatic seat back release option. Has a white button for the switch as shown. Replaces Ford Part #: C8OZ-13713-A.

$32.00 Price: $38.57

Buy Details

Availability: In-Stock Item
Item #: 14194 -

OEM Motorcraft 2 prong door jamb switch 3/4 inch door jamb mounting holes. Various applications, some for passenger side, some both sides. Replaces Ford Part #: C8OZ-13713-A.

$32.00 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31163 -

OEM Motorcraft 2 prong door jamb switch 3/4 inch door jamb mounting holes. Passenger side switch courtesy light switch, for use on 1968 - 1973Mercury Cougar and Ford Mustang. Replaces Ford Part #: C8OZ-13713-A.

$0 Price: $6.36

Buy Details

Availability: In-Stock Item
Item #: 14198 -

This switch looks very close to original. On close inspection you will notice that there is no Autolite logo and the plastic is not as milky colored as the originals. Sold Individually. Replaces Ford Part #: C8AZ-13713-C.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0305 -

C8ZZ-14018 Left side door ajar switch found on all 68 Mercury Cougar XR7's and part of the Safety Convenience Package found optionally on Mercury Cougar or Ford Mustang. The safety convenience package or "convenience control" option included 4 warning lights either mounted on the dash (without air conditioning) or on the console. Switch assembly tag numbers as listed in the 1967 Cougar Electrical assembly manual on page 69, C7ZB-10B997-A switch assembly left hand. The engineering number cast...

$0 Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0310 -

C8WB-14018-B Right side door ajar switch found on all 68 Mercury Cougar XR7's and part of the Safety Convenience Package found optionally on Mercury Cougar or Ford Mustang. The safety convenience package or "convenience control" option included 4 warning lights either mounted on the dash (without air conditioning) or on the console. Switch assembly tag numbers as listed in the 1967 Cougar Electrical assembly manual on page 69, C7ZB-14018-A switch assembly right hand side. The engineering...

Switch - Door Jamb - Courtesy Light / Tilt Column - 7/8 Inch - Repro ~ 1968 - 1969 Mercury Cougar / 1968 - 1969 Ford Mustang
1963-67 Full sized Ford such as Custom, 500, Galaxie, and XL models|full sized Mercury such as Monterey, S-55, Montclair, and Park Lane|1963-67 Fairlane, 500, XL, Ranchero, and GT|1963-68 Mercury Comet, 202, Capri, Caliente, and Cyclone|1965-67 Ford Mustang| 1967 Cougar|1963-67 Ford Thunderbird|T-Bird, and Landau| 1963-68 Ford Falcon, Futura, Ranchero|1963-67 Lincoln, Continental
0
$0 Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 14193 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. OEM style door jamb switch to release tilt/tilt-away columns on a 68 or 69 Mercury Cougar or Ford Mustang. Here is an excerpt from the 1967 owners manual: The wheel will swing to the right and up towards the instrument panel whenever the driver opens his door, provided the ignition switch is turned off. When re-entering the vehicle on the drivers side, pull the steering...

$17.00 Price: $25.05

Buy Details

Availability: In-Stock Item
Item #: 14195 -

68 - 70 Courtesy Light Switches! These replacement switches are an exact reproduction of the original Ford part. This is the 2 pin type. Includes original Autolite Logo. Sold only as a pair. *NOTE* The 1967 uses a smaller pin assembly and this switch will not work without modification. Replaces Ford Part #: C8AZ-13713-C.

$0 Price: $32.55

Buy Details

Availability: In-Stock Item
Item #: 26044 -

This pair of sturdy cardboard taillight covers / protectors are designed to protect your taillight sockets from being dislodged or damaged. In addition to the protection they offer they also serve to give a "cleaner" look to your luggage compartment. Will require minor trimming. Please let us know if you have a good used example so as to use as a template to perfect these parts.

$0 Price: $229.25

Buy Details

Availability: In-Stock Item
Item #: 31683 -

Reproduction taillight panel for the 67-68 Cougar. Yet another in a long line of great fitting parts from our friends over at Dynacorn, this replacement taillight panel is perfect for those of you who have rust holes in and around the taillight area. As seen in the photo above, this is only the taillight panel and will not include the quarter extension panels or the rear taillight lower structure. ...

$0 Price: $485.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27029 -

This is how most of our taillight panels are cut off. If you only need a partial panel we can do that too, just give us a ring. Keep in mind we only cut panels like this if both 1/4's are ruined. It is getting very hard to come up with some of these cuts. ...