Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 337-384 of 819
$0 Price: $27.35

Buy Details

Availability: Rare / NOS Part
Item #: 19269 -

*NOTE - These knobs are NOT in the original Ford packaging, they were bought in bulk from a supplier who did not provide packaging. This style of knob was used on almost all Ford products starting in 1968 and continuing on through the late 1970's. The latest renditions in reproduction form are actually pretty good but for the purist these make a nice touch. Paste the part number into the Ebay search box and sometimes you can get lucky and get a pair for under $30. Limited supply, original...

$0 Price: $0.95

Buy Details

Availability: In-Stock Item
Item #: 41335 -

Exact replacement inside door handle nut, trunk lock nut, and hood scoop nut. Same finish as originals. 10 of these are used to mount the 68-71 hood scoop found on the 68 428 CJ, 69-70 Eliminator, 69-70 428 Ram Air equipped Cougars and 71 GT and 429CJ. Two of these per door are used on the 69-70 inside door release. Two of of these nuts used to attach 1967-68 Cougar trunk locks.

$0 Price: $4.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24193 -

Rubber pad for installing the trunk lock mechanism to deck lid. Check out this video

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0275 -

Used original driver side (left hand) key lock to latch door lock rod for the Mercury Cougar or Ford Mustang.Ford part # C7ZZ-6522135-A.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0269 -

Used original passenger side (right hand) key lock to latch door lock rod for the Mercury Cougar or Ford Mustang.Ford part # C7ZZ-6522134-A.

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30679 -

This part mates to and is held down by Golde #100 413 681. The Golde part number for the smaller, lower elbow guide is 100 413 664

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30678 -

This part mates to and is held down by Golde #100 413 682. The Golde part number for the smaller, lower elbow guide is 100 413 663

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24526 -

Folding lug wrench for all 1968 - 1973 Mercury Cougars. Standard folding wrench for 13/16" lug nuts. This version has the elongated hex socket portion. There is also a version that has a rounded upper section formed on the socket. This is also the scissors jack tool.There were minor variations over the years, but the handle you will receive will be one of the following:Ford part number: C8ZZ-17032-A (1968 - 1969)Ford part number: D0ZZ-17032-A (1970 - 1971) Ford part number: D4ZZ-17032-A...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33047 -

Folding lug wrench for all 1968 - 1973 Mercury Cougars. Standard folding wrench for 13/16" lug nuts. This version has a rounded upper section of the hex lug socket. This is also the scissors jack tool.There were minor variations over the years, but the handle you will receive will be one of the following:Ford part number: C8ZZ-17032-A (1968 - 1969)Ford part number: D0ZZ-17032-A (1970 - 1971) Ford part number: D4ZZ-17032-A (Factory Service Replacement since 1974) If you'd like a particular...

MSRP:$249.99
$249.99 Price: $233.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 20047 -

Nice reproduction of the original Rotunda, over the counter dealer accessory. Stainless steel construction, weighs just under 8 pounds. The supplier unfortunately does not include the hardware and we have yet to source any. Actual dimensions are 20 1/2 inches wide, 48 1/2 inches long, and the back lip is 3 inches tall. Installation hole spacing is as follows. Rear spacing 47-11/16" on center, front spacing (nearest the rear window) is 47-9/16". The spacing on short sides are 18-3/4" on...

$0 Price: $60.17

Buy Details

Availability: In-Stock Item
Item #: 14376 -

Map light bezel for overhead roof consoles on both 1967-68 Mercury Cougar XR7 and Ford Mustang. These are a great reproduction at a great price. These were always pitted and before the reproductions came out three years ago a very nice used pair sold for about $100. To date we have sold more than 300 pairs and have had great feedback! Sold in pairs. Bezels only. Sometimes called a 'door' Ford part number C7ZZ-13788-A. *Customer Comments* Hello. I just bought my first 1967 Cougar XR7 in about...

$0 Price: $13.55

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 26614 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. Low quality reproduction thin rubber mirror gasket. This is nothing like the...

$0 Price: $119.75

Buy Details

Availability: In-Stock Item
Item #: 13716 -

These black Monte Carlo bars are equipped with Heim joints for smoother operation. Replaces Ford Part # C7ZZ-16A052-BJB.

$0 Price: $43.15

Buy Details

Availability: In-Stock Item
Item #: 11328 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford Part # C7ZZ-16A052-BRB. ...

$0 Price: $61.15

Buy Details

Availability: In-Stock Item
Item #: 11329 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-BRC. ...

$0 Price: $30.35

Buy Details

Availability: In-Stock Item
Item #: 11326 -

Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARB.

$0 Price: $39.95

Buy Details

Availability: In-Stock Item
Item #: 11327 -

Straight Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARC.

$0 Price: $118.18

Buy Details

Availability: In-Stock Item
Item #: 23442 -

This restored drip rail moulding / trim will have had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. Our mouldings / trim are sold outright, as a pair, or one side only. Most people will be satisfied with our used grade "A" drip rail mouldings / trim, however these are for the person that is striving for perfection with his or her show car. Ford part # driver side...

$0 Price: $39.87

Buy Details

Availability: In-Stock Item
Item #: 45464 -

Restored quarter window to drip rail moulding / trim for the driver side (left hand) of the Mercury Cougar. This stainless trim part affixes to the "C" pillar and fills the gap between the roof side weather strip and drip rail gutter. Also known as "Roof Side Cover Retainer."

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20281 -

Stainless trim part that affixes to the "C" pillar. This trim part fills the gap between the roof side weather strip and drip rail gutter. Also known as "Roof Side Cover Retainer"

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 56455 -

This obscure little part fills the gap on the underside of the roof rail where the rear 1/4 window meets the "C" pillar. Also known as "Roof Side Cover Retainer"

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20573 -

This obscure little part fills the gap on the underside of the roof rail where the rear 1/4 window meets the "C" pillar. Also known as "Roof Side Cover Retainer"

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24114 -

Used driver side (left hand) rear vinyl top moulding / trim for your Mercury Cougar. Speed nut fasteners are sold separately. This trim requires 4 speed nuts for attaching.Ford part # C7WY-65423A21-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar

$0 Price: $92.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24116 -

Used driver side (left hand) vinyl top moulding / trim for your Mercury Cougar. We have not had any of these drivers side mouldings / trim to sell single in at least 15 years... When folks remove these with a pry bar they always seem to start with the drivers side before they realize the error of their ways. If you have a few drivers side moulding / trim you would like to sell we would love to hear from you! Speed nut fasteners are sold separately. This piece of trim needs 4 speed nuts.Ford...

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24113 -

Used passenger side (right hand) rear vinyl top moulding / trim for your Mercury Cougar. Good used moulding with no broken studs or heavy scratches. Fasteners sold separate. Speed nuts sold separately, this trim item requires a total of 5 speed nuts.Ford part # C7WY-65423A20-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar ...

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24115 -

Used passenger side (right hand) vinyl top moulding / trim for your Mercury Cougar. Good used part with no heavy scratches or broken studs. Speed nut fasteners are sold separately. This trim requires a total of 4 speed nuts.Ford part # C7WY-65423A18-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar

$0 Price: $595.85

Buy Details

Availability: In-Stock Item
Item #: 30983 -

This is a set of four rechromed die cast mouldings that attach via speed nuts at the bottom of your vinyl top. These do not pry off! Use your 1/4" drive ratchet with a deep 11/32" socket and small extension. You must remove your rear interior side panels to access the studs for the side mouldings. New speed nuts included, just in case.. If you have extra sets of cores above and beyond the four needed to exchange, we would be willing to give in store credit. Restored moulding will not ship...

$0 Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24479 -

For all 1968 Cougar trunks to mount the spare tire. Total length according to the MPC is 9.75 inches, with 4 inches of threads on the end. We have found that the overall length is 8 inches with 3-1/4 inches of threads. Basically the same J- bolt as found on 1967 Mercury Cougars but with the thicker, 1/2-13 threads. As we research more we will post our results here. Would love to get specs on J-bolts from those of you with low mile and very original cars.

$0 Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10988 -

Steel plate for mounting the door pull or grab handle on 1967-68 Mercury Cougar XR7. Right and left is dependent upon which way the nylon inserts are installed. Comes complete as shown with nylon inserts for attaching the door pulls. The screws with 1/2 inch flat head for mounting this plate to the doors are also a available (three required).

$0 Price: $104.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32973 -

Used mounting bracket for the sunroof motor on the 67 - 70 Mercury Cougar. This bracket is only used with the 67 - 70 power sunroof motor.

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 33593 -

Reproduction mounting bracket / retainer for the XR7G headlight eyelid emblem. The emblem will attach to this bracket with double sided tape or epoxy, whichever you choose. Emblem and 3/8" 10/24 nuts not included.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 10298 -

Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang. Original Ford part number C8MY-1424-A. About 3 inches in diameter, this is the specified trunk hold down plate for the use with the factory mag wheels.

$0 Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 20314 -

These spacers are required to properly mount the trunk lock housing to the trunk. Two required per car, sold individually. Ford part number C7WY-6543565-A. Check out this video

$0 Price: $16.85

Buy Details

Availability: In-Stock Item
Item #: 31769 -

These spacers are required to properly mount the trunk lock housing to the trunk lid.  Sold as a pair. Replaces Ford part number C7WY-6543565-A. Follow this link to find the lock housing nuts. Check out this video

$0 Price: $1.15

Buy Details

Availability: In-Stock Item
Item #: 41263 -

10 of these are used to mount the 1968-71 Cougar hood scoop found on the 68 428 CJ, 1969-70 Eliminator, 1969-70 428 Ram Air equipped Cougars, and 1971 GT and 429CJ. Sold individually Zinc (dark silver).

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31699 -

New O-ring gasket for the 1967-68 Mercury Cougar flip trunk lock cylinder. Lock cylinder must be removed from the trunk lock housing to install. Original O-rings are normally cracked and broken when we disassemble them. 

$0 Price: FREE

Buy Details

Availability: Download
Item #: 90002 -

Here is a free download for the operating instructions for the sunroof panel on the 1968 Mercury Cougar.

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 42391 -

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation.

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31608 -

This listing is for the outer wheel house on a 1967 or 1968. Often when you replace the skin you will find multiple soft spots in the outer wheel house, especially down low. If you do not want to pay the oversized shipping on these large items we do sell patch panels.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31609 -

This listing is for the outer wheel house on a 1967 or 1968. Often when you replace the skin you will find multiple soft spots in the outer wheel house, especially down low. If you do not want to pay the oversized shipping on these large items we do sell patch panels.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

$0 Price: $29.88

Buy Details

Availability: In-Stock Item
Item #: 31623 -

This listing is for the outer wheel house upper patch for the driver side of your 67-68. 

$0 Price: $29.88

Buy Details

Availability: In-Stock Item
Item #: 31624 -

This listing is for the outer upper wheel house patch for the passenger side of your 67-68.  

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31615 -

This listing is for outer wheel house lower patches, front and rear for the driver side of your 67-68. There is no cost savings on the purchase price, but often people only need the lower section and shipping these (especially overseas) can be cost prohibitive. Since we cut these in house you can request where we cut if you would like a custom cut different than what is pictured here.

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31616 -

This listing is for outer wheel house lower patches, front and rear for the passenger side of your 67-68. There is no cost savings on the purchase price, but often people only need the lower section and shipping these (especially overseas) can be cost prohibitive. Since we cut these in house you can request where we cut if you would like a custom cut different than what is pictured here.

MSRP:$74.99
$74.99 Price: $62.87

Buy Details

Availability: In-Stock Item
Item #: 26-0004 -

New reproduction 1968 XR7 Overhead console warning light bar. Unlike 1967 XR7, 1968 features a woodgrain overlay and white lettering painted on the surface of each lens. Ever noticed how the originals have a chunk of vacuum hose wedged behind the mounting tabs? That is because the originals used the wrong grade of steel and the soft metal tabs would not hold them in place without help. We fixed that by using the correct quality of steel.