Home > Engine & Under Hood
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41900 -
Metal-stamped 1968 - 1970 Lower Radiator Mounting Brackets feature exact detail and proper fit. Painted dull black. Sold in Pairs. Rubber insulators not included. Replaces Ford part # C8ZZ-8052-A. Check out our video on Radiator and Fan upgrades below: ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 26780 -
Our used lower cradle brackets for the 24" wide radiator will always have some amount of damage as shown. We will not send you mangled junk that is heavily rusted but they will require some amount of straightening due to their vulnerable location. These also work with the 67 small block and big block when putting in a 68-70 24" radiator but keep in mind the 1967 cars are not pre-drilled as are the 1968-1970 Mustang and Cougar.We are out of the 1970 style of brackets. We only have the two...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 26784 -
Sold as a pair. One long and one short bracket. Fits 1971-73 Mercury Cougar and Ford Mustangs that have original style radiators. Mounting bolts not included. Replaces Ford part number D0OB-8B359 RH, and D0AB-8K007 LH. Check out our video on Radiator and Fan upgrades below: ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27274 -
D0WY-9A188-A and D0WY-9A188-B Mounting bracket for the evaporative vapor separators, mounts in the drivers side trunk rail. Two brackets paired up. *Note - This is only a small part of the 9B004 assembly.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26594 -
Used on big block radiators, unique to 1967. Sold as a pair. Replaces Ford part number C3AZ-8125 Check out our video on Radiator and Fan upgrades below: ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26645 -
Used on the lower mounts on the 67 - 70 big block and small block 24" wide radiator. A 1967 390 with the original radiator uses a different lower mount system which uses a different sized insulator. If you are updating your 67 with a 68 radiator you will need these. Sold as a pair. Replaces Ford part #: C8ZZ-8125. Check out our video on Radiator and Fan upgrades below: ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26655 -
Sold as a pair, fits well into your upper radiator bracket used on 24" radiators 1967 - 1970. Replaces Ford part #: C7OZ-8124Check out our video on Radiator and Fan upgrades below: ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 23835 -
C5AZ-10A370-C Alternator mounting spacer, goes between the cylinder head and alternator housing. Fits 1968-70 390-2V, 390-4V, and 428CJ engines. Smog OK. There is no casting number but one is listed C5AE-10A370-C. Inside diameter 7/16". We measure them out at 1-5/8 inches long, supposed to be pink anodized or tinted.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24335 -
Steel spacer between cylinder head and pump. Inside diameter 3/8", length approximately 1-13/16".
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41044 -
Reproduction exhaust pipe to exhaust manifold nut for the Mercury Cougar or Ford Mustang and they are sold individually.Ford part # 376420-S.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 33080 -
Application is 1968 289-2V, 302-2V, and 302-4V all with manual transmissions. This assembly is needed for the installation of the cylinder head air supply tubes. Sold as one nut/ one ferrule. 8 total needed for smog tube attaching. Originally these were installed in conjunction with a lower tube. New Old StockFord part number C8OZ-9B471-A.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24449 -
Application is 1968 289-2V, 302-2V, and 302-4V all with manual transmissions. This assembly is needed for the installation of the cylinder head air supply tubes. Sold as one nut/ one ferrule. 8 total needed for smog tube attaching. Originally these were installed in conjunction with a lower tube.
Wanted!
Buy
Details
Availability: Rare / NOS Part
Item #: 32945 -
Nut and ferrule assembly for thermactor smog tubes. Sold individually, 8 per car with V-8 engine. This is a NOS replacement nut and ferrule that is one piece. Fits thermactor equipped cars from 1967-71. Including 1967 cars with California emissions, 1968 manual transmission cars, 1968-71 Ford cars with factory Holley carburetors, etc. Several Ford part numbers for this item C7AZ-9B471-A, AND D5TZ-9B471-A, C6AZ-9B471-A,C8OZ-9B471-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 10620 -
New rubber "O" ring for Ford V-8 distributors from 289/302/351W/351C/429 engines.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15831 -
Reproduction black oil cap for your 67 - 70 Cougar or Mustang, featuring the FoMoCo logo.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13862 -
Brightens the engine compartment and looks sharp. Fits our big block finned aluminum valve covers (item# 26018) and others with the round push-in style opening. Requires a rubber grommet to fit into the valve cover, which is usually included with new valve covers.Does NOT fit valve covers with the "stovepipe" fitting (like our small block finned aluminum units) or factory valve covers the tabs for twist-on oil caps. This cap is for after market valve covers.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13861 -
Correct detail. Chrome plated with rectangle-style FoMoCo script stamped into the top surface of cap. Nipple measures 5/8" diameter. This is the correct Closed Emissions oil cap for the finned "G" valve covers we sell.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13860 -
Brightens the engine compartment and looks sharp. Fits aftermarket valve covers only. These require a rubber grommet to fit into the valve cover. Please Note: This oil cap DOES NOT fit the finned "G" valve covers we sale, as they are built to OEM specs.
Wanted!
Buy
Details
Availability: Restored / Remanufactured
Item #: 30847 -
Rechromed, used oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 or 390 and California emissions. This chromed push on oil cap was used on the DGS package or 390 GT engine dress up kit which included chrome valve covers and air cleaner lid. Identified by the vertical pointing elbow, for attaching a hose to the air cleaner base. Marked FoMoCo on the top inside a rectangle box.*Note - a Black painted version was also available on most 289 engines sold in California.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13859 -
Correct detail. Chrome plated with oval-style FoMoCo script stamped into the top surface of cap. This is a push on cap and requires the type of cap that has a round filler tube protruding from the driver side valve cover. This is the correct Open Emissions oil cap for the finned "G" valve covers we sell.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13866 -
This cap is an exact reproduction of the original. Features include three filters and the AUTOLITE logo. The PCV elbow is included but not installed for those wanting to re-use their original metal elbow or the metal concours reproduction. Fits the 67, 68, 69, and 70 Mercury Cougar. Technically, this is a copy of the Ford service replacement oil cap, and the same cap with plastic elbow as found on cars starting in 1969. 1968 Ford cars sold in the US, had metal elbows. ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 17293 -
Used oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 engine. This black painted twist on oil cap was found on non-emission cars. Meaning 49 States except for California.*Note - a chromed version was also available with engine dress up kits.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41566 -
This 49 state oil filler cap fits valve covers that utilize twist-on oil caps. This cap is a reproduction of the original cap that was found on 1967 models with the S code 390 and 289 engines with dress up kit like found on DGS 1967 Cougars.. This part features a quality chrome finish along with a crisp "FoMoCo" stamping. At its widest point it is 3" in diameter. The total height is 2 1/4" high including the portion that goes into the valve cover.* Trivia - For 289 engines it should have an...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31966 -
Used 1969-70 black Autolite oil fill cap with black plastic elbow. Very limited supply of these. Reproduction, Ford service replacement, and oil caps installed starting in 1969 utilize a black plastic elbow. Several variations noted from our collection, no doubt possible San Jose and Dearborn supplier differences. Will need detailing or fresh black paint applied. Would also suggest replacing the rubber grommet. These 50 year old rubber grommets are rock hard and likely leak air. Gasket to...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 13129 -
Used 1968 black Autolite oil fill cap with correct square metal elbow. Very limited supply of these. Reproduction, Ford service replacement, and oil caps installed starting in 1969 utilize a black plastic elbow. Reproduction steel elbow and rubber grommet available for those who already have an Autolite oil fill cap. Several variations noted from our collection, no doubt possible San Jose and Dearborn supplier differences.Replaces Ford part number C8AZ-6766-A.
Wanted!
Buy
Details
Availability: Restored / Remanufactured
Item #: 31251 -
Chromed "Autolite" oil filler cap, original cap chromed, not reproduction. Bare cap, will need baffle material added. Also recommend purchase of a rubber grommet and either plastic or steel PCV elbow. Your specific application will determine if plastic or steel elbow. See related items. C8AZ-6766-B$40 refundable core charge does apply.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31972 -
Original used oil filler cap adapter for any 1967 Mercury Cougar or 1965-67 Ford Mustang. This is for use with the open emissions, push on oil cap. This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D. Will most definitely need a new gasket. These will ship "as found" or fresh from our wrecking yard. Photo is most cases will show a cleaned part for glamour photography shots. Also have reproduction version.Ford part...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 27450 -
This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33520 -
Oil filler cap elbow for hose that goes to the air cleaner elbow. Black plastic like original, fits 1968-70 Mercury Cougar and Ford and Mustang. See related items for grommet and other related parts.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13853 -
This cap is an exact reproduction of the original. Features include three filters, the AUTOLITE logo and a beautiful chrome finish. The PCV elbow is included but not installed for those wanting to re-use their original metal elbow or the metal ( concours reproduction). Fits the 67, 68, 69, and 70 Mercury Cougar. Available in Black or Chrome Finish.Technically, this is a copy of the Ford service replacement oil cap, and the same cap with plastic elbow as found on cars starting in 1969. 1968...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27352 -
Engine oil dipstick as found on most any 1967 Ford with 289 engines (C, A, or K Code). This has the correct small shield as found on 1967 and earlier cars, starting in 1968 this dip stick gained a larger 'bell' shaped shield that went over the dip stick tube. Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dip stick end is approximately 19.40 inches. The handles appear to have been painted black...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11271 -
Nice reproduction oil dipstick made from all stainless steel. Only fits 289 or 302 Ford engines from 1967-73. These dipstick tubes have the 'full' and 'add' markings in the correct place, however they do not have any Ford part numbers stamped on them. Black steel as shown, not plain shiny steel like originals.Replaces Ford part # C7OE-6750-B or C8OE-6750-B.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27353 -
Engine oil dipstick as found on most any 1968 Ford with 289 or 302 engines (C, F or J Code). This has the correct bell shaped shield as found on 1968 and later cars. Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 19.40 inches. The handles could have been painted black or blue originally.Ford casting # C8OE-6750-B.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27356 -
Engine oil dipstick as found on most any 1970-73 Ford with 351 Cleveland engines (H, or M Code), 1972-73 (Q code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dipstick end is approximately 21-11/16 inches. The handles were painted blue originally. Ford part # D0AZ-6750-A, Ford casting # D0AE-6750-A.*NOTE* In 1970 351W engines also were designated as H codes, 351W has 6 bolts attaching the valve covers,...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27354 -
Engine oil dipstick as found on most any 1969 Ford with 351 Windsor engines (H or M Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 22.80 inches. The handles were painted blue originally. Ford part # C9OZ-6750-A, Ford casting # C9OE-6750-B.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27355 -
Engine oil dipstick as found on most any 1970 Ford with 351 Windsor engines (H Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 20 inches. The handles were painted blue originally. Ford master part # D0AZ-6750-C, Ford casting # D0AE-6750-C.*NOTE* 351C engines also were designated as H codes, 351W has 6 bolts attaching the valve covers, 351C has 8 bolts attaching the valve covers. ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27357 -
Chromed engine oil dipstick as found on many 1967-69 Ford with 390 engines (S Code), 427-4V (W Code), 428CJ (Q or R Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dipstick end varys at either 19.25" and approximately 20.25" (full, add, and safe marks are the same). The handles were chromed originally. Ford part # C7OZ-6750-A, Ford casting # C7OE-6750-A.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 27358 -
Painted engine oil dipstick as found on many 1967-69 Ford with 390 engines (S or X Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. From the top of the shield to the dipstick end varys from either 19.25" to approximately 20.25" (full, add, and safe marks are the same). The handles were painted blue originally. Typically the painted dipsticks were found on the non-GT (6.5 Litre) cars in 1968. Ford part # C7AZ-6750-A, Ford casting...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15295 -
Original design in painted Ford Blue. Beautiful fit, a really nice part. Also known as oil level indicator tube. Replaces Ford part # C6AZ-6754-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15250 -
Small block dipstick tube for the 1968 Cougar and Mustang. Painted blue as original. Replaces Ford Part # : C8AZ-6754-A. Also fits 1969 Mustangs with the 302.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41535 -
Also available in Chrome. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375With the paint Stripped, it measures .365It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15294 -
Nice chrome finish. Also available in Ford blue. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375 With the paint Stripped, it measures .365 It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A. ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15281 -
This oil filter is absolutely concours correct. A must for Show. All are silk-screened with multiple colors.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41450 -
Quality After-Market oil filter for the 1967 - 1973 V-8 Mercury Cougar or Ford Mustang. Better filter than OEM.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 31629 -
Reproduction oil filter adapter from any 1968-70 Ford with 390 or 428CJ (non SCJ). Fits Cougar, Mustang, Torino, Fairlane, Cyclone, Ranchero, etc. Nice cast aluminum bracket for installing the spin on oil filter and oil pressure sending unit. Ford casting number C8AE-6881-A. Will fit 1967 FE engine blocks too. Those technically used an adapter with a casting number of C0AE-6881-A.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 30409 -
Used oil filter adapter from any 1968-70 Ford with 390 or 428CJ (non SCJ). Fits Cougar, Mustang, Torino, Fairlane, Cyclone, Ranchero, etc. Nice cast aluminum bracket for installing the spin on oil filter and oil pressure sending unit. Ford casting number C8AE-6881-A. Will fit 1967 FE engine blocks too. Those technically used an adapter with a casting number of C0AE-6881-A.