Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 721-768 of 770
Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 11446 -

All of our Standard and Decor, 1967 and 1968 rear interior panels come naked without the horizontal basket weave strip. We often will leave a yellowed, peeling one in place when they ship but if they are in good shape we remove them and sell them separately. If you purchase a panel from us and want a grade C strip, just mention it in the comments section of your online order and we will include it for free. Used driver side (left hand) rear interior panel in saddle for the standard Mercury...

Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 11447 -

All of our Standard and Decor, 1967 and 1968 rear interior panels come naked without the horizontal basket weave strip. We often will leave a yellowed, peeling one in place when they ship but if they are in good shape we remove them and sell them separately. If you purchase a panel from us and want a grade C strip, just mention it in the comments section of your online order and we will include it for free. Used passenger side (right hand) rear interior panel in saddle for the standard Mercury...

Price: $292.50

Buy Details

Availability: Out of Stock
Item #: 32900 -

New old stock Ford accessory cable trunk popper. Fits late 1967 - 1973 Mercury Cougar and other Ford products. Lever release, complete kit, NOS Ford. Detailed instructions included.  Ford part number C7AZ-62432A00-A. *Note - All 1967, and most 1968 trunk lids will not have a large enough access opening in the under side structure to allow the trunk latch to be inserted. 

Price: $179.85

Buy Details

Availability: Out of Stock
Item #: 32856 -

New old stock Ford accessory electric trunk popper. Fits late 1968 - 1973 Mercury Cougar and other Ford products. Electric push button release, complete kit, NOS Ford. Detailed instructions included.  Ford part number C9AZ-54432A00-A. *Note - All 1967, and most 1968 trunk lids will not have a large enough access opening in the under side structure to allow the trunk latch to be inserted. 

Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 32507 -

Used, with scratches and pits, suitable for every day driver or restoring.

Price: $179.87

Buy Details

Availability: Out of Stock
Item #: 20287 -

Uncommon jack as identified by the coarse threads. This version was made by a specific supplier AUSCO or Auto Specialties Manufacturing Company. AUSCO supplied jacks to Ford until 1970.See the link for the Ford jack research done by Marcus Anghel - Anghel Restorations

Price: $77.27

Buy Details

Availability: Out of Stock, Discontinued
Item #: 23316 -

Reproduction scissor jack for any year Mercury Cougar or Ford Mustang. This is a cheap Chinese jack that is clearly marked "For Display Use Only, Not for Lifting Vehicles". It resembles an original scissors jack, but there are several differences. It functions properly and will lift weight, but we wouldn't use it on any of our personal cars. This is the ACME brand like used by Wile E Coyote.

Price: $69.25

Buy Details

Availability: Out of Stock
Item #: 23422 -

Excellent reproduction seals for your 67 - 68 Cougar or Mustang vent windows. Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces For part numbers: C7ZZ-6521449-A C7ZZ-6521448-A

Price: $7.35

Buy Details

Availability: Out of Stock, On Order
Item #: 14301 -

Now you can replace this original part, which is commonly stripped out, with a nice reproduction. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like the 1967-73 cars. We have noticed that the last generation 1971-73 Cougars had 4 round shaped plates in the rear floors. Same threads, all work the same. These were pretty much used on all Ford...

Price: $552.35

Buy Details

Availability: Out of Stock
Item #: 23487 -

Reproduction shock tower and apron assembly  for your Cat or Pony.Here's a little film to help you fortify your flexxy feline!

Price: $49.15

Buy Details

Availability: Out of Stock
Item #: 26878 -

Pair of reproduction firewall to shock tower braces for the Mercury Cougar. These are good quality reproductions that are already painted black so the only thing you need to do is bolt them on.Replaces Ford part #'s C7ZZ-16A053 driver side (left hand), C7ZZ-16A052 passenger side (right hand).

Price: $89.87

Buy Details

Availability: Out of Stock
Item #: 20149 -

Passenger side (right hand) front seat floor pan. This pan is cut from the full floor pans in order to save on shipping costs when a customer does not need the entire length pan. Cutting from the Dynacorn full length pans means this will be a quality cut, when compared to other pans on the market.   1967-68 style ribbing, works in 1969-70 and can be modified to fit 1971-73. *NOTE* This floor pan has the outside lip bent down which is proper for coupes, convertibles were bent up....

Price: $174.87

Buy Details

Availability: Out of Stock
Item #: 30165 -

Very nice pit free mirror worthy of a low mile original car.*NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere!Hole spacing: 4 3/8"Ford part # C7WY-17696-ADo you have riv-nut questions? Here are riv-nut answers! ...

Price: $209.88

Buy Details

Availability: Out of Stock
Item #: 26940 -

Working grade "A" driver side (left hand) remote mirror with nice chrome. This would look right at home on a low mile unrestored car. Hole spacing: 4 3/8"Do you have riv-nut questions? Here are riv-nut answers!

Price: $201.45

Buy Details

Availability: Out of Stock
Item #: 14703 -

Quality reproduction mirror for your 1967 Cougar. Whereas it is not easily detected at first glance, the head of the mirror does have a slightly different contour than original. The base is spot on perfect and the controller, cable assembly are all excellent quality. The wand (sold separately) is correct for 1967 (fluted, baseball bat shaped wand) as opposed to the 1968 version with a ball on the end (which we also sell). Plastic mounting pad and hardware included. *NOTE* Mustang mirrors...

Price: $22.86

Buy Details

Availability: Out of Stock
Item #: 19170 -

Fine scratches but great for the guy who wants original. The Reproduction does not have the II-DMI-6 lettering at the bottom like this original. You will have to carefully peel (roll back) the aluminum backing that is glued in place before gluing it in your mirror. If you use needle nose pliers and take your time it usually works fine. Note that the pictures of our 67-68 mirrors and lens can be deceiving. This is a tapered mirror, the narrow end faces upward on a Cougar, it is reversed when...

Price: $29.88

Buy Details

Availability: Out of Stock, Discontinued
Item #: 12975 -

These are almost impossible to crimp back together after your mirror has been repaired or re-chromed. Fits many Ford products from the 1960's and 1970's.

Price: $2.70

Buy Details

Availability: Out of Stock
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

Price: $161.87

Buy Details

Availability: Out of Stock, Discontinued
Item #: 26179 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. A lower front chin spoiler / air dam was never an option for the 1967-68...

Price: $199.85

Buy Details

Availability: Rare / NOS Part
Item #: 32684 -

New old stock, This unit is also known as a bumper filler, rock guard, or filler panel. Fits any 1967-68 Mercury Cougar.Ford part # C7WY-17779-A.

Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 12441 -

Used driver side (left hand) sunroof cable for the Mercury Cougar. We have a really hard time keeping these units in stock. Keep in mind this same basic cable design was used on many makes including Porsche, BMW, Mercedes and several other cars through the early 1980's. The same basic design (minor changes through the years) was used on Lincolns, Thunderbirds and other Ford products through the mid seventies. We are buyers of used sunroof cables, motors and misc parts so keep us in mind you...

Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 11902 -

Used passenger side (right hand) sunroof cable for the Mercury Cougar. We have a really hard time keeping these units in stock. Keep in mind this same basic cable design was used on many makes including Porsche, BMW, Mercedes and several other cars through the early 1980's. The same basic design (minor changes through the years) was used on Lincolns, Thunderbirds and other Ford products through the mid seventies. We are buyers of used sunroof cables, motors and misc parts so keep us in mind...

Switch - Door Jamb - Courtesy Light / Tilt Column - 7/8 Inch - NOS ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
1963-67 Full sized Ford such as Custom, 500, Galaxie, and XL models|full sized Mercury such as Monterey, S-55, Montclair, and Park Lane|1963-67 Fairlane, 500, XL, Ranchero, and GT|1963-68 Mercury Comet, 202, Capri, Caliente, and Cyclone|1965-67 Ford Mustang| 1967 Cougar|1963-67 Ford Thunderbird|T-Bird, and Landau| 1963-68 Ford Falcon, Futura, Ranchero|1963-67 Lincoln, Continental
0
Price: $34.97

Buy Details

Availability: Out of Stock
Item #: 32727 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. NOS new old stock door jamb switch to release tilt/tilt-away columns on a 67, 68 or 69 Mercury Cougar or Ford Mustang. Here is an excerpt from the 1967 owners manual: The wheel will swing to the right and up towards the instrument panel whenever the driver opens his door, provided the ignition switch is turned off. When re-entering the vehicle on the drivers side, pull the...

Price: $14.85

Buy Details

Availability: Out of Stock
Item #: 20265 -

This tiny little spring has a diameter no larger than a pencil. Its function is to attach the deck lock cover to the deck lock housing and to keep the deck lock cover closed. This is a unique spring to this application and rather hard to find.Check out our video below showing how to easily remove and reinstall your 67-68 trunk latch, lock, and cover plate, and some info on getting a new key made. ...

Price: $40.05

Buy Details

Availability: Out of Stock
Item #: 20151 -

Reproduction passenger side (right hand) torque box outer section for Mercury Cougar and Ford Mustang coupe and convertible.Here's our little film to help you fortify your flexxy feline!

Price: $43.97

Buy Details

Availability: Out of Stock
Item #: 32131 -

NOTE: We've been getting reports that these reproduction torsion bars lose their tension after a few weeks and will no longer lift the deck lid. These reproduction rods are installed horizontally in your trunk and attach to the trunk lid hinges.  Replaces Ford part numbers C7WY-6544890-A and C7WY-44891-A. The body section of the shop manuals describe how to adjust these bars, we offer a torsion bar adjusting tool for this purpose. *Note - Does not fit Mustang. Check out our...

Price: $89.87

Buy Details

Availability: Out of Stock
Item #: 12281 -

Good used, rust free valance with minor amounts of filler, dings and creases. These are not paint ready flawless parts, but rather 40 years old and taken from a parts car. Unless you have body work skills these are not a good value considering the amount of work needed to make them paint ready. We are very happy with the repro front valance we sell.Ford part # C7WY-17620-A. ...

Price: $259.88

Buy Details

Availability: Out of Stock
Item #: 24191 -

Good used, rust free valance that will have minimal prep time to be paint ready. Getting to be hard to find without excessive filler. If you have the optional rear bumper guards then you will want a valance like the one pictured that has the factory holes for them. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car. Ford part # C7WY-6540544-A.

Price: $250.88

Buy Details

Availability: Out of Stock
Item #: 32682 -

Good used, rust free valance for the 67 - 68 XR7G Cougar that will have minimal prep time to be paint ready. Getting to be hard to find without excessive filler. If you have the optional rear bumper guards then you will want a valance like the one pictured that has the factory holes for them. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car. Ford part # C7WY-6540544-A.

Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 12282 -

Decent used, rust free valance that will need work done. Getting to be hard to find without excessive filler. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car that will have small dents, creases and often some amount of filler. The current reproduction rear valances (unlike the front) do not fit very well.Ford part # C7WY-6540544-A.

Price: $530.87

Buy Details

Availability: Out of Stock
Item #: 42364 -

We have a very hard time keeping these NOS rear lower valences in stock. Since the reproductions don't quite fit right, NOS and good used are the best options at this time.Ford part # C7WY-6540544-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store...

Price: $266.85

Buy Details

Availability: Out of Stock
Item #: 11209 -

Good used, rust free valance with provisions for rear bumper guards. Getting to be hard to find without excessive filler. We have a local body man take out the small dents and he does not load them up with Bondo. He removes the filler and works the dent out properly. If you have the optional rear bumper guards then you will want a valance like the one pictured that has the factory holes for them. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car. We do...

Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 15994 -

Decent used, rust free valance that will need substantial work. Getting to be hard to find without excessive filler. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car that will have small dents, creases and often some amount of filler. We do have NOS and on occasion we get in a flawless used example.Ford part # C7WY-6540544-A.

Price: $28.85

Buy Details

Availability: Out of Stock
Item #: 33235 -

New Old Stock passenger side (right hand) vent / wing window handle for the 1967 Mercury Cougar or Ford Mustang. Also fits 1966 Ford and Mercury mid sized cars. Ford part number C6OZ-6222916-A.

MSRP:$11.99
Price: $9.15

Buy Details

Availability: Out of Stock, On Order
Item #: 26131 -

This threaded replacement wand will require you to cut 8/32" fine threads in your original controller. Your OEM mirror controller is made of a very soft metal so one can often install these as "self tapping".1967 and 1968 are different, see comparison picture. The 1968 version was rounded off due to new safety standards. The mirror nut tool will fit over the 1967 wand, but not the 1968.

Price: $175.95

Buy Details

Availability: Out of Stock
Item #: 15014 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. Economy replacement vinyl top that looks great and fits perfect. This...

Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 24225 -

Good used crank correct for 1967 XR7 or standard models. No obvious blemishes, driver quality. The Ford part # is C5ZZ-6523342-C, casting number as found on the back reads C7ZB-6523348-A. *Customer Feedback* Don, Lin and staff; Just to let you gentlemen know that I have received the 1967 XR7 saddle tan door panels you sent and I am extremely happy with the condition and the service! It has been less than a week since I ordered them and they arrived via USPS, as per requested, with a very...