Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 913-960 of 1042
Price: $184.86

Buy Details

Availability: Out of Stock
Item #: 12230 -

1967 - 1973 Cougar Logo Rubber Floor Mats - Used Dark chocolate brown, correct for Cougars equipped with Saddle, Ginger, or Tobacco interior. Notice this set is the version that is a couple of inches narrower so it will fit well with the addition of convertible inner rockers.

Price: $71.87

Buy Details

Availability: Out of Stock
Item #: 21-0085 -

Background paint is not sun damaged, guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out. Check out the video below on our new gauge tester: ...

Price: $89.87

Buy Details

Availability: Out of Stock
Item #: 21-1015 -

This combination gauge is a fuel and temperature gauge all in one with an oil and amp "idiot" lens on either side. Both gauges are guaranteed to work good. The face will have some amount of fading / spotting and will not look perfect. We sell the precious few Grade "A" faces we get separate.Check out the video below on our new gauge tester: ...

Price: $9.15

Buy Details

Availability: Out of Stock
Item #: 41457 -

Reproduction Glove Box Catch for the 1967 and 1968 Mercury Cougar and Ford Mustang

Price: $49.85

Buy Details

Availability: Out of Stock
Item #: 32774 -

New old stock 1968 glove box lock. A great optional accessory. All original glove box latches. Includes 2 matching aluminum keys. Fits any 1967-68 Mercury Cougar or Ford Mustang.Ford part number C6OZ-6206081-C. Technically the lock style is for 1968, notice the push button with rounded edges? 1967 push buttons had square edges. 

Price: $160.88

Buy Details

Availability: Out of Stock
Item #: 25813 -

Correct for any 1967-73 Ford product with a tilt or fixed column. The repros are fine, but the end knob is distinctly different. Extremely difficult part to find in NOS form and very sought after. Keep in mind we also have excellent used pieces at a fraction of the cost. Ford part # D0AZ-13305-A.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of...

Price: $75.87

Buy Details

Availability: Out of Stock
Item #: 19832 -

Contrary to what you might think at first glance, the support rods used in 1967 - 1968 Cougar headliners are not the same front to back. Each of the rods is bowed to a different curve. To replace a headliner and make it look right, you must keep the rods in the same order as they came out of the original headliner. To help you do this, Lincoln-Mercury coded each rod with a color applied to each end. From front to rear, the 1967 - 1968 color codes of the headliner rods are: None Red White Brown...

Price: $50.27

Buy Details

Availability: Out of Stock, Discontinued
Item #: 42293 -

Reproduction NUGGET GOLD Interior Headliner for the 1967 or 1968 Mercury Cougar. Correct Moon Crater texture available in most stock colors. We also have used headliner bows and used windlace in stock. Keep in mind you have to remove your front and rear glass to do a headliner correctly. This holds true when you replace your vinyl top as well. Now also available in Medium Blue, Dark Aqua, Dark Red (not pictured) and Dark Green (in Cougar called Dark Ivy Gold, not pictured). Thinking of...

Price: $145.36

Buy Details

Availability: Out of Stock, Discontinued
Item #: 42134 -

Reproduction SADDLE Interior Headliner for the 1967 or 1968 Mercury Cougar. Correct Moon Crater texture available in most stock colors. We also have used headliner bows and used windlace in stock. Keep in mind you have to remove your front and rear glass to do a headliner correctly. This holds true when you replace your vinyl top as well. Now also available in Medium Blue, Dark Aqua, Dark Red (not pictured) and Dark Green (in Cougar called Dark Ivy Gold, not pictured). Thinking of installing...

Price: $64.67

Buy Details

Availability: Out of Stock, Discontinued
Item #: 42145 -

Reproduction MAROON Sunroof Headliner for the 1967 and 168 Mercury Cougar. Correct Moon Crater texture available in most stock colors. We also have used headliner bows and used windlace in stock. Keep in mind you have to remove your front and rear glass to do a headliner correctly. This holds true when you replace your vinyl top as well. Now also available in Medium Blue, Dark Aqua, Dark Red (not pictured) and Dark Green (in Cougar called Dark Ivy Gold, not pictured). Thinking of installing...

Price: $160.02

Buy Details

Availability: Out of Stock, Discontinued
Item #: 42148 -

Reproduction SADDLE Sunroof Headliner for the 1967 and 1968 Mercury Cougar or Ford Mustang. Correct Moon Crater texture available in most stock colors. We also have used headliner bows and used windlace in stock. Keep in mind you have to remove your front and rear glass to do a headliner correctly. This holds true when you replace your vinyl top as well. Now also available in Medium Blue, Dark Aqua, Dark Red (not pictured) and Dark Green (in Cougar called Dark Ivy Gold, not pictured). Thinking...

Price: $57.47

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10604 -

Reproduction DARK BLUE Headliner for the 1967 and 1968 Mercury Cougar. Correct Moon Crater texture available in most stock colors. We also have used headliner bows and used windlace in stock. Keep in mind you have to remove your front and rear glass to do a headliner correctly. This holds true when you replace your vinyl top as well. Now also available in Medium Blue, Dark Aqua, Dark Red (not pictured) and Dark Green (in Cougar called Dark Ivy Gold, not pictured). Thinking of installing your...

Price: $13.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27304 -

Pair of used wire anchors for keeping the rear most headliner bow stationary. These are fragile wires, and prone to rusting. We try to keep them in inventory. 1967-68 anchor wires are 5-9/16 inches long. A DIY person can improvise these pretty easy, using lengths of regular wire. Ford part # C4OB-6252180.

Price: $164.85

Buy Details

Availability: Out of Stock
Item #: 27184 -

Used grade "A" horn center / pad in light blue fro the Mercury Cougar. This is the best used example of a 1967 horn center / pad. Rarely do we have more than one center as nice as this one in stock but we'll do what we can to get you a good pad. This unit includes a reproduction center emblem and reproduction outer ring, but will be shipped disassembled so that you can paint it to match your interior. The reproduction center emblem and outer ring can also be purchased separately. *Restoration...

Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 23994 -

Driver quality used left side or driver side folding door handle. This type of handle was used on the 1967 XR7 models and 1968 Cougars. This is also the deluxe handle found in Mustang and other Ford / Mercury cars. Some pitting, will have a good spring and rubber bumper. Sorry mounting screw not included.

Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 23993 -

Driver quality used right side or passenger side folding door handle. This type of handle was used on the 1967 XR7 models and 1968 Cougars. This is also the deluxe handle found in Mustang and other Ford / Mercury cars. Some pitting, will have a good spring and rubber bumper. Sorry mounting screw not included.

Price: $48.29

Buy Details

Availability: Out of Stock, Discontinued
Item #: 14915 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers so if speaker holes are needed you will have to use your old panels as a template to drill holes in these "Mustang" reproductions. Replaces Ford Part number C7WY-650345-A1G / Casting number as seen on the back of the driver side will read C7WB-6502345-BW

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14916 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14918 -

Reproduction interior kick panels in parchment / off-white for the Mercury Cougar or Ford Mustang. Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14920 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $1,228.37

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10754 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black interior seat kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter. Kits come with a pair of upper...

Price: $772.97

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10755 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black front seat interior kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter. Kit comes with a pair of...

Price: $525.47

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10756 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black rear seat interior kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather rear bench with upper and lower seat skins. Keep in mind the rear seats were primarily vinyl with only the very top...

Price: $1,228.37

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10757 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white interior seat kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter....

Price: $772.97

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10758 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white front seat interior kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the...

Price: $525.47

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10759 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white rear seat interior kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather rear bench with upper and lower seat skins. Keep in mind the rear seats were primarily...

Price: $11.88

Buy Details

Availability: Out of Stock
Item #: 15-0054 -

Rubber isolator used in tilt away steering column near the lower bearing. Two required per car. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Price: $43.65

Buy Details

Availability: Out of Stock
Item #: 22668 -

This mounts at the top front corner of the driver side rear interior panel. Ford called this part a "Cap - quarter trim panel upper". All 1967-68 Mercury Cougar and also used on 1968 Ford Mustang coupe with deluxe interior or body code 65B.You may also need the attaching screw. Replaces Ford part number C7WY-6531491-B or C7WB-6531491. Fits 67 CougarFits 68 CougarFits 68 Mustang with body code 65B ...

Price: $43.65

Buy Details

Availability: Out of Stock
Item #: 22667 -

This mounts at the top front corner of the passenger side rear interior panel. Ford called this part a "Cap - quarter trim panel upper". All 1967-68 Mercury Cougar and also used on 1968 Ford Mustang coupe with deluxe interior or body code 65B.You may also need the attaching screw. Replaces Ford part number C7WY-6531490-B or C7WB-6531490. Fits 67 CougarFits 68 CougarFits 68 Mustang with body code 65B ...

Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 24087 -

This knob is for Cougars equipped with consoles only and then only the earliest of Cougars would have seen this plastic, lower profile, delicate knob. Very hard to find Cougar only knob that is not found on any other model. This is one RARE little dude indeed!Replaces part # C7WA-18817

Price: $160.88

Buy Details

Availability: Out of Stock
Item #: 19032 -

Complete five piece set for 1967 Cougars with center console. The majority of 1967 model Cougars got this improved design with stronger outer knobs. Keep in mind we have reproduction knobs that will work in place of these. Also keep in mind we will accept your incomplete set of used 67 console radio knobs for a complete set of our 1968 reproduction knobs. Give us a ring for details.

Price: $15.05

Buy Details

Availability: Out of Stock, On Order
Item #: 56565 -

Reproduction pair of LED's sold as an add-on to our existing kit. If you have a 67 - 70 XR7, you will need this pair of LED's for the clock. These bulbs can also be used for the oil gauge, the 67 - 68 rear console light and the courtesy lights on your door panels.

Price: $79.65

Buy Details

Availability: Out of Stock, On Order
Item #: 26923 -

New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color while retaining your dimmer function. This kit will require o-ring installation to make the LEDS fit correctly. The rest of the installation is easy. Please do look at our diffusers listings in blue, red or yellow for that stand out custom color you...

Price: $29.88

Buy Details

Availability: Out of Stock
Item #: 21-0056 -

Used " BLUE " high beam indicator lens for the Mercury Cougar. The early 1967 lens was taped to the back of the dash pad. The late 1967 through 1968 used a lens with a small metal housing.

MSRP:$23.75
Price: $9.86

Buy Details

Availability: Out of Stock, On Order
Item #: 11514 -

Used grade "B" rear courtesy / opera light lens for the Mercury Cougar. Opera lights were came as standard equipment on all XR7 Cougars, but were installed on many decor and standard level Cougar interiors. These units will have a few "warts" which show up as pitting in the chrome and may also have some minor cracking in the lens. If you just need a lens for your driver quality car, these are a great option. But if you compare this grade "B" lens to our reproductions, it will look like...

Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 24216 -

This used assembly includes lamp socket, bracket, mercury switch, and length of wire.Replaces part # C7ZB-15702-A

Price: $395.87

Buy Details

Availability: Out of Stock
Item #: 19095 -

Used Grade A pads are almost a little wrinkled and drawn looking.  We most likely will not be able to provide the color of your choice.

Price: $197.91

Buy Details

Availability: Out of Stock
Item #: 32183 -

Grade B pads are will be wrinkled peeling away from the base. We most likely will not be able to provide the color of your choice.

Price: $72.55

Buy Details

Availability: Out of Stock
Item #: 55889 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

Price: $66.85

Buy Details

Availability: Out of Stock
Item #: 12041 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

Price: $60.17

Buy Details

Availability: Out of Stock
Item #: 41656 -

Reproduction pillar post mouldings for the Mercury Cougar or Ford Mustang. These units are sold as a pair.

Price: $65.57

Buy Details

Availability: Out of Stock
Item #: 41658 -

Reproduction pillar post mouldings for the Mercury Cougar or Ford Mustang that feature two 2" gauge pods on the driver side. Sold as a pair.

Price: $13.65

Buy Details

Availability: Out of Stock, On Order
Item #: 15532 -

This is the second printing so it does include the xr7 package.

Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 20091 -

Good used original insulation pad as taken from a Western parts car. Used Jute pad that will not have any water or pest damage. These original pads are nice because they are made from a much more dense material (3.74 pounds) than the reproductions (.75 Pounds) and they have the factory perforated "knock out" sections for the optional speakers. A "Must Have" for show cars as the rear package tray fits better with this low profile material and no modern insulation resembles the original when...

Price: $138.87

Buy Details

Availability: Out of Stock
Item #: 11747 -

Nothing matches the fit and feel of NOS. This will outlast the reproduction armrest three to one.

Price: $138.87

Buy Details

Availability: Rare / NOS Part
Item #: 33531 -

Base standard saddle arm rest on a 1967 Mercury Cougar or Ford Mustang, interior trim code 2F. Nothing matches the fit and feel of NOS. This will outlast the reproduction armrest three to one. Ford part number C7ZZ-6524140-A1F.

Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 15-0022 -

Used pivot pin for the Mercury Cougar or Ford Mustang / Thunderbird equipped with a tilt / tilt away column. This is a pressed pin with a flange and five are required per car. This pin is internally threaded with a # 6-32 thread. Ford part # C7SZ-3D739-A. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 15-0036 -

One required per car, mates to female version attached to the under dash loom. Same plug for tilt and non tilting columns.