Bumpers & Trim

These plastic fillers were mounted to the end of the 1970 hood extension and filled the gap between center grille surround (extension) and the side grilles. Very rare to find a 1970 Cougar with both of these intact as the driver side often got broken when someone reached in the recess for the hood release latch. These feature the original Ford part numbers. Sold as a pair. Disappointing quality, brittle plastic. Unfortunately, used examples are very hard to find, and these are the only new...

These used original plastic fillers mount to the hood extension, and filled the gap between center grille surround (extension) and the side grilles. Very rare to find a 1970 Mercury Cougar with both of these intact as the driver side often got broken when someone reached in the recess for the hood release latch. These feature the original Ford part numbers. Sold as a pair only. Original Ford parts, these will seldom be in stock. Typically the ultra rare driver side may have a defect or small...

These are our average used, or Grade B, front license plate mounting bracket that attaches to the passenger side of the bumper of all 1971-72 Mercury Cougars. It may or may not have the rubber anti rattle bumpers present, but will have either original or reproduction plastic inserts for screwing on the license plate. This B grade bracket will function properly, but will have some slight damage or signs of straightening.Replaces Ford part number D1WY-17A385-A.

This grille will be less than perfect with one or two cracks, bend showing and pitting. A Grade "B" will not be cracked around the perimeter and will not be missing any pieces. Good for a driver quality car. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in...

This grille will be less than perfect with one or two cracks, bend showing and pitting. A Grade "C" WILL be cracked around the perimeter, but will not be missing any pieces. Good for a driver quality car.

This is a complete 1969 (one year only) grade "A" grille bright work set taken from a Western parts car(s) with no obviously visible cracks, pits on the face of the chrome or bends. Not perfect, but the best we can obtain, usually taken from three or more cars to make one set. This set includes two halves, two eye lids and one center section (which often we will include a reproduction in lieu of used). Brackets, hardware and actuator are sold separate but often we will throw in several pieces...

1970 Mercury Cougar grille chrome pieces. Passenger side, driver side doors, both housings, and the center grille. Technically painted for a standard model, but can easily be detailed for an XR7. Included are the original Ford boxes as shown. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon...

NOS part that shows shelf wear and may need to be repainted in places. For 1967 and early 1968 Cougars built prior 12/15/1967. Can easily be made to fit 1968.  Ford part # C7WY-13A136-B (Headlamp exterior cover) C7WY-13A154-A (Headlamp hinge) Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

NOS part that shows shelf wear and may need to be repainted in places. Can easily be made to fit 1967. Ford part number C7WY-13A136-B Casting number C8WB-13A138 *NOTE* For use on 1968 Cougars built after 12/15/1967. Not for use with 1968 Cougar GT-E. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Used grade "A" driver side (left hand) grille half for the 1969 Mercury Cougar. These will be the best we have available, taken from a Western parts car. The horizontal bars will not have any breaks or cracks, the chrome will not have any pits on the face but you will see minor pitting between the horizontal bars on the black painted areas. Often there will be a crack where the tension spring for the headlight attaches but we will include one of our grille repair clips if that is the case....

Used grade "A" passenger side (right hand) grille half for the 1969 Mercury Cougar. These will be the best we have available, taken from a Western parts car. The horizontal bars will not have any breaks or cracks, the chrome will not have any pits on the face but you will see minor pitting between the horizontal bars on the black painted areas. Often there will be a crack where the tension spring for the headlight attaches but we will include one of our grille repair clips if that is the case....

Used grade "C" driver side (left hand) grille section for use as a patch for those with a break in the section that continues to the fender. Watch the video below to see how to fix your current grille and save a lot of money. Check out our video on grille repair below: ...

Used grade "C" driver side (left hand) grille section for use as a patch for those with a break in the section that bolts to the center grille. Watch the video below to see how to fix your current grille and save a lot of money.

Used grade "C" Passenger side (right hand) grille section for use as a patch for those with a break in the section that bolts to the center grille. Watch the video below to see how to fix your current grille and save a lot of money. Check out our video on grille repair below: ...

Used grade "C" Passenger side (right hand) grille section for use as a patch for those with a break in the section that bolts to the center grille. Watch the video below to see how to fix your current grille and save a lot of money.

Decent looking reproductions that have the correct anodized finish, the holes are drilled in the correct places, sold as a six piece set. We suggest fitting them to your car prior to painting so as to make any minor adjustments (bends) without potentially damaging your paint. The door trim is open on the end which points to the front fender which is not correct. Decent alternative to missing or heavily damaged trim. Contact us if you are considering restoring your originals as we have a cost...

This option requires you to PRE-PAY a $40 core charge. If we do not receive your core within 30 days of the original purchase, your core charge will be an in-store credit only. If your core is full of rust and debris (sounds like a tambourine) then it most likely is not a core we can give credit on. ALL GRADE B ACTUATORS COME WITH A 60 DAY WARRANTY. You can find the seal rebuild kit here. Used grade "B" headlight door actuator for your Mercury Cougar. Every once in a while (not often) we will...

This option requires you to PRE-PAY a core charge of $50. Used grade "B" headlight door actuator for your Mercury Cougar. This grade B actuator has been reconditioned with new seals but will still slowly leak down after time as not all of them will function as new after being reconditioned. These actuators are sold individually on an exchange basis or outright (for an additional core charge). One actuator actuates both headlight doors on the 69-70. This unit also comes with a 30 day warranty....

NOS grille headlight eyelid door vacuum actuator for the Mercury Cougar. No exchange needed for NOS. *NOTE* While original FoMoCo boxes are fun and all, we do not recommend you invest in these units as shown with the multiple crimps at the top. These later dated service replacement units shown here were made out of country and are inferior to what the OEM supplier made back in "the day". The rubber elasticity is not as good as the early units and the porosity of the metal makes them impossible...

This option requires you to PRE-PAY a $50 core charge. If we do not receive your core within 30 days of the original purchase, your core charge will be an in-store credit only. If your core is full of rust and debris (sounds like a tambourine) then it most likely is not a core we can give credit on. ALL RECONDITIONED ACTUATORS COME WITH A ONE YEAR WARRANTY. *NOTE - Reconditioning on these actuators involves replacing the shaft seal and dust boot, we do not service the internal diaphragms. You...

NOS Ford replacement driver side headlight housing for the 1971 - 1973 Mercury Cougar. The 73 headlight housing will fit on 71 - 72, but not vice versa. This is a new in the box original replacement part that inludes the headlight cups and rings. Ford part number D3WY-13008-B

NOS Ford replacement passenger side headlight housing for the 1971 - 1973 Mercury Cougar. The 73 headlight housing will fit on 71 - 72, but not vice versa. This is a new in the box original replacement part that inludes the headlight cups and rings. Ford part number D3WY-13008-A

Concours quality, includes check valve.

NOS or new old stock - C7SZ-13A165-A Bolt like pin that one or both sides of the hidden headlight hinge rides on. 1967-68 Mercury Cougar uses 4, 1969-70 Mercury Cougar uses 2 on the outsides. Also used on many other 1967-71 Ford, Mercury, and Lincoln cars with the vacuum operated hidden headlights. 1967 - 1970 Mercury Cougar and XR7 1967 - 1969 Ford Thunderbird or T-Bird 1968 - 1969 Ford and Mercury full sized cars 1971 Ford and Mercury full sized cars 1970 and newer Lincoln Continental...

D3WY-17K834-A Molded rubber impact strip found on most 1973 Mercury Cougar front bumpers, driver side only. We will seldom have this part in stock, due to its low survival rate and high demand.

D3WY-17K833-A Molded rubber impact strip found on most 1973 Mercury Cougar front bumpers, passenger side only. We will seldom have this part in stock, due to its low survival rate and high demand.

As decades old Cougar lore goes... After Dan Gurney test drove the XR7-G for the first time he was asked what he thought about this new Cougar. His supposed reply was, "you can't hear the horn at high speeds." The car was later equipped with this third horn just for Mr. Gurney. Anyway, that is how the legend goes.  This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

This item has been discontinued until further notice.Basically correct looking except for screws in place of the rivets. The High or Low tone is indicated in raised letters located on the perimeter of the horn. Replaces Ford Part #: C9ZZ-13832 / C9ZZ-13833 or C9ZF-13801-B / C9ZF-13802-C.

This item has been discontinued until further notice.The High tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13832 or C9ZF-13801-B.

This item has been discontinued until further notice.The Low tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13833 or C9ZF-13802-C.

This used original, color coded set of vacuum hoses is 100% complete and relatively pliable. It comes complete with decades of dirt and grime (patina) for no extra charge. If you want to remove the grime it will take some serious elbow grease but it can be done. The color coded stripes are quite resilient to cleaning as the ink used actually embedded itself into the rubber. Kit includes used check valve and fittings shown, but does not include headlight switch. "I found a good way to...

This used original, color coded set of vacuum hoses is 100% complete and relatively pliable. It comes complete with decades of dirt and grime (patina) for no extra charge. If you want to remove the grime it will take some serious elbow grease but it can be done. The color coded stripes are quite resilient to cleaning as the ink used actually embedded itself into the rubber. "I found a good way to remove 50 years of crud. Soak the lines in hot water and dawn dish soap for a bit then take a...

This used original, color coded set of vacuum hoses is 100% complete and relatively pliable. It comes complete with decades of dirt and grime (patina) for no extra charge. If you want to remove the grime it will take some serious elbow grease but it can be done. The color coded stripes are quite resilient to cleaning as the ink used actually embedded itself into the rubber. If you have a tried and true method of cleaning these hoses let us know and if it sounds good we will post it here!NOTE:...

This is what is referred to as a campaign part. It was found that the early 1967 Cougars were having some issues with the headlights and this revised hose kit with ground strap was the fix. Often these have been found opened on dealers shelves with the "near new" take off hoses placed back in the original box. This is a great find for the guy wanting to do a concours restoration on his 1967 Mercury Cougar. Not for use on a 1968 as the switch was located under the dash as opposed to next to the...

Concours quality, includes check valve.

The Hustler Stick features heavy-duty 1-1/4" diameter tubing, and is an alignment bar designed for bumpers, hoods, decks, panels etc. Made in the USA, it has a 1/4", 6 foot long chain with hooks at each end. This versatile tool is very useful in shaping damages on a vehicle body. To use it, hook it up to the panel or bumper, anchor the stick properly, and pull it by hand.We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged...

Driver side front turn signal and combination side marker lens. Clear color, fits 1973 Mercury Cougar all models. Grade A used. These are used and they will have some scratches or scuffs in the plastic.Using a product like Novus Plastic Polish really improves the appearance and helps make these shine.Replaces Ford part number D3WY-13209-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store...

Driver side front turn signal and combination side marker lens. Amber color, fits 1973 Mercury Cougar all models. Grade B used. These will have a defect, discoloration, small crack, or a star from road debris. Using a product like Novus Plastic Polish really improves the appearance and helps make these shine.Replaces Ford part number D3WY-13209-A.

Driver side front turn signal and combination side marker lens. Amber color, fits 1971-72 Mercury Cougar all models. These are New Old Stock or NOS, but they will have shelf wear. Meaning light scratches or scuffs in the plastic. Using a product like Novus Plastic Polish really make these shine.Replaces Ford part number D1WY-13209-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of...

Passenger side front turn signal and combination side marker lens. Clear color, fits 1973 Mercury Cougar all models. These are New Old Stock or NOS, but they will have shelf wear. Meaning light scratches or scuffs in the plastic. Using a product like Novus Plastic Polish really make these shine.Replaces Ford part number D3WY-13208-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of...

These plates show almost no wear and would look right at home on a show car.NOTE: The plates and plate numbers pictured are exactly what you'll receive.

These plates show average wear and can be used as is, or restored to look new.NOTE: The plates and plate numbers pictured are exactly what you'll receive. 

New old stock Grille Center Medallion for the 1967 and 1968 Mercury Cougar.  Ford part # C7WY-8A223-A, casting number C7WB-8B344-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's...

Clean cores are required for this service, cores that are turned in for this service that are kinked, heavily pitted or mouldings with several holes drilled into them are not worth restoring. That being said, often all of the gravel pitting usually found at the front cannot completely be removed as it would result in a product that will be too thin. "...Don - Happy Fourth of July. I wanted to send a note to your team of gratitude for all the help they provided me over the last three years...

Clean cores are required for this service, cores that are turned in for this service that are kinked, heavily pitted or mouldings with several holes drilled into them are not worth restoring. That being said, often all of the gravel pitting usually found at the front cannot completely be removed as it would result in a product that will be too thin. Keep in mind that because these are restored mouldings, they will not have the black strips in place and will need to be painted on."...Don -...

Used driver side (left hand) and passenger side (right hand) convertible top boot moulding / trim for the standard Mercury Cougar or Ford Mustang convertible. No cracks or missing studs, driver quality chrome. We also have some that need re-chrome as well as some singles, please call for details. Ford part # C9ZB-76423A19-A driver side, C9ZB-76423A18-A passenger side. *NOTE* If you have questions about your cores, checkout our video below. ...

Used grade "B" driver side (left hand) convertible top boot moulding / trim for the Mercury Cougar XR7 convertible. These are unique to the XR7 as the standard convertibles used the shorter version (same as Mustang) that ended at the quarter window. We are often asked, "Why so much?" The answer is that the production figures for these XR7's were very low and most folks will consider restoring them in just about any condition. When we do get in a XR7 convertible parts car (every few years or...