Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 577-624 of 785
MSRP:$22.00
$22.00 Price: $12.75

Buy Details

Availability: In-Stock Item
Item #: 13783 -

Reproduction single hole front mount center visor bracket for the 1969 and 1970 Mercury Cougar or Ford Mustang. This is a decent reproduction, but not quite as nice as the originals. Reproductions only come in 'paint to suit' black but we have most original colors in used. Replaces Ford Part #: C9AZ-6204132.

$0 Price: $100.07

Buy Details

Availability: In-Stock Item
Item #: 69_Vinyl_Sun_Visors -

Reproduction sun visors that are fully padded and covered with the correct textured vinyl to match the seats. These units are sold as a pair.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 30515 -

Pair of reproduction cowl vent panel support pads. These pads help prevent the upper cowl cover from flexing. 

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24142 -

This is the Left hand or driver side spring that holds the rear license plate or fuel door in the upright position. Fits all years of Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-B

$0 Price: FREE

Buy Details

Availability: Download
Item #: 33850 -

Here is our free 7MB download for the 1967 - 1972 Mercury Cougar suspension diagram.

$32.00 Price: $41.85

Buy Details

Availability: Rare / NOS Part
Item #: 32726 -

New Old Stock Motorcraft 2 prong door jamb switch 3/4 inch door jamb mounting holes. Passenger side switch courtesy light switch, for use on 1971-73 Mercury Cougar and Ford Mustang without automatic seat back release option. Has a white button for the switch as shown. Replaces Ford Part #: C8OZ-13713-A.

$32.00 Price: $38.57

Buy Details

Availability: In-Stock Item
Item #: 14194 -

OEM Motorcraft 2 prong door jamb switch 3/4 inch door jamb mounting holes. Various applications, some for passenger side, some both sides. Replaces Ford Part #: C8OZ-13713-A.

$0 Price: $6.36

Buy Details

Availability: In-Stock Item
Item #: 14198 -

This switch looks very close to original. On close inspection you will notice that there is no Autolite logo and the plastic is not as milky colored as the originals. Sold Individually. Replaces Ford Part #: C8AZ-13713-C.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0311 -

C9WY-14018-B Left side door ajar switch found on all 1969-70 Mercury Cougar XR7's and part of the Visual Check Panel Package found optionally on Standard Cougars. The visual check panel or "convenience panel" option included the 'door ajar' light.Fits 69 Cougar and XR7Fits 70 Cougar and XR7Fits 69 MustangFits 70 MustangFits 70 Lincoln ContinentalFits 71 Lincoln ContinentalFits 72 Lincoln Continental ...

$0 Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0312 -

C9WY-14018-A Right side door ajar switch found on all 1969-70 Mercury Cougar XR7's and part of the Visual Check Panel Package found optionally on Standard Cougars. The visual check panel or "convenience panel" option included the 'door ajar' light.Fits 69 Cougar and XR7Fits 70 Cougar and XR7 Fits 69 MustangFits 70 MustangFits 70 Lincoln ContinentalFits 71 Lincoln ContinentalFits 72 Lincoln Continental ...

Switch - Door Jamb - Courtesy Light / Tilt Column - 7/8 Inch - Repro ~ 1968 - 1969 Mercury Cougar / 1968 - 1969 Ford Mustang
1963-67 Full sized Ford such as Custom, 500, Galaxie, and XL models|full sized Mercury such as Monterey, S-55, Montclair, and Park Lane|1963-67 Fairlane, 500, XL, Ranchero, and GT|1963-68 Mercury Comet, 202, Capri, Caliente, and Cyclone|1965-67 Ford Mustang| 1967 Cougar|1963-67 Ford Thunderbird|T-Bird, and Landau| 1963-68 Ford Falcon, Futura, Ranchero|1963-67 Lincoln, Continental
0
$0 Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 14193 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. OEM style door jamb switch to release tilt/tilt-away columns on a 68 or 69 Mercury Cougar or Ford Mustang. Here is an excerpt from the 1967 owners manual: The wheel will swing to the right and up towards the instrument panel whenever the driver opens his door, provided the ignition switch is turned off. When re-entering the vehicle on the drivers side, pull the steering...

$17.00 Price: $25.05

Buy Details

Availability: In-Stock Item
Item #: 14195 -

68 - 70 Courtesy Light Switches! These replacement switches are an exact reproduction of the original Ford part. This is the 2 pin type. Includes original Autolite Logo. Sold only as a pair. *NOTE* The 1967 uses a smaller pin assembly and this switch will not work without modification. Replaces Ford Part #: C8AZ-13713-C.

$0 Price: $485.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27030 -

This is how most of our taillight panels are cut off. If you only need a partial panel we can do that too, just give us a ring. Keep in mind we only cut panels like this if both 1/4's are ruined. It is getting very hard to come up with some of these cuts. Keep in mind that this is an over sized item and cannot get shipped through USPS, it can only go through UPS. You can expect to pay up to $200 in shipping for this item.

$0 Price: $58.10

Buy Details

Availability: In-Stock Item
Item #: 26045 -

Sold as a pair, these cardboard protectors do more than just give your trunk a clean look, they protect your tail light sockets from damage. If you see them advertised for less we want to know about it!

$0 Price: $14.85

Buy Details

Availability: In-Stock Item
Item #: 30377 -

This RAM AIR hood scoop template was created by placing a piece of butcher paper under an original 1969 428 Cobra Jet RAM AIR hood scoop and applying spray paint to the mounting holes and opening. Contrary to what you may have been told, the opening is not supposed to be round, and yes those protrusions you see are in fact correct. The 1969 uses a slightly different cut out than the 1970.

$0 Price: $6.89

Buy Details

Availability: In-Stock Item
Item #: 19417 -

For those wanting to make their own "custom" package tray this will assist you in getting the correct dimensions the first time. This template is traced from a reproduction packege tray onto a piece of butcher paper.

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 97979 -

This listing is for a TEMPLATE which would be used to cut your own shock tower weld in plates. Our supplier made a batch of weld in plates to the wrong thickness, so we're selling this template for anyone who has the ability to fabricate their own. As a stand alone item, this template will not work for what it's indented for because it's too thin. It's made from 18 gauge steel (the actual plates are supposed to be 11 gauge) so they're worth nothing more than being a pattern for the...

MSRP:$3.99
$3.99 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26641 -

These are usually cracked, shrunk or missing. Your visors will constantly fall out of the center holder if these are missing or shrunken. Sold as a pair. Replaces Ford Part #: D1DZ-6204115-A.

$0 Price: $29.57

Buy Details

Availability: In-Stock Item
Item #: 12210 -

This is an upgraded version from what you see in our video but the idea is the same. This tool has a square hole so you can use your 3/8" drive ratchet or breaker bar to get the correct angle and have even better control of your leverage when placing the torsion bar into the slot. Used to remove the hinge springs (torsion rods) off the 1967 - 1973 Cougar or Mustang. No more trying to remove with the wrong tools . These can be tricky to remove without this tool.  Will not work on 1964 -...

$0 Price: $47.35

Buy Details

Availability: In-Stock Item
Item #: 15069 -

Reproduction passenger side (left hand) torque box for Mercury Cougar and Ford Mustang convertibles.Here's our little film to help you fortify your flexxy feline!

$0 Price: $121.55

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31009 -

This is a reproduction 3 piece non assembled torque box for the driver side on the 69 - 70 Cougar or Mustang Coupe. The benefit of getting a non assembled torque box is that you'll find installation much easier as compared to the pre-assembled boxes.  Included are inner and outer panels and gusset. Passenger side non-assembled torque boxes are not available.

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 15823 -

Reproduction torque box gusset for your 67 - 70 Cougar or Mustang. It is the reinforcement bracket that attaches to the bottom of the torque box for extra strength. Sold as a pair.

$0 Price: $44.85

Buy Details

Availability: In-Stock Item
Item #: 20150 -

Driver side (left hand) outer section of the torque box for the Mercury Cougar and Ford Mustang for both coupe and convertible.

$0 Price: $85.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20659 -

These long rods are installed horizontally in your trunk and attach to the trunk lid hinges. We only remove these bars in pairs from cars that demonstrate that they can in fact support the weight of the deck lid on their own. We do not save rusty, bent or weak springs. These are the best we have to offer from our Western parts cars. 1967-70 torsion springs C7WY-6544890-A and C7WY-44891-A. Limited to supply on hand. The body section of the shop manuals describe how to adjust these bars, we...

$0 Price: $289.89

Buy Details

Availability: In-Stock Item
Item #: 30092 -

Reproduction transition panel for the 67 - 70 Cougar. This is a complete replacement for the factory spot-welded-in panel, not a partial cut. For more info on this new trunk panel, check out this video below:

$0 Price: $189.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30097 -

Used transmission support for 67 - 70 Cougars and Mustangs. We strongly recommend that you buy this used support as compared to the reproductions. The repros we offer are inferior to the originals, and to be honest, they simply do not fit as well.

$0 Price: $300.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32409 -

Used transmission tunnel specialty cut. From a 1969 Mercury Cougar, slightly different than the 1970 tunnel.File picture of 1967 tunnel, you get a 1969 tunnel cut. If you choose not to purchase the entire floor pan, you can buy the individual full length floor pans and opt for this specialty cut of the full length transmission tunnel. We will give enough "meat" on all sides to meet up with the firewall, floor pans and rear seat area. If you'd like a smaller section, you can tape off the...

$0 Price: $58.98

Buy Details

Availability: In-Stock Item
Item #: 14-0075 -

WE CAN NOT SHIP THIS PRODUCT INTERNATIONALLY WITHOUT SHIPPING IT AS HAZARDOUS MATERIAL. THIS WILL INCUR HAZARDOUS MATERIAL CHARGES VIA UPS AND SOME COUNTRIES DO NOT ACCEPT IMPORTING THIS PRODUCT.Clear, high strength adhesive for use with lightweight fabrics and carpets. Heat and moisture resistant.

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32264 -

Driver side, rear, lower corner, special cut that ties the quarter panel with the tail light panel on any 1969-70 Mercury Cougar coupe or convertible. These special cuts are removed from rust free examples from a used Cougar. Ford part number C9WY-6545119-A.

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32265 -

Passenger side, rear, lower corner, special cut that ties the quarter panel with the tail light panel on any 1969-70 Mercury Cougar coupe and convertible. These special cuts are removed from rust free examples from a used Cougar. Ford part number C9WY-6545118-A.

MSRP:$95.00
$95.00 Price: $91.22

Buy Details

Availability: In-Stock Item
Item #: 25934 -

*NOTE* 1969 - 1970 Convertible mats do not have any covering to the right of the gas tank. This is in fact how the originals were made. Many Convertible owners prefer to have a full cover mat. If that is you we suggest you purchase the coupe mat for your convertible.This is the best made, most correct Mercury Cougar trunk mat on the market (Mustang mats will not fit). Made of heavy die-cut vinyl with correct gray and black plaid pattern. Do NOT confuse this with the light duty mat you will see...

MSRP:$95.00
$95.00 Price: $91.22

Buy Details

Availability: In-Stock Item
Item #: 25935 -

This is the best made, most correct Mercury Cougar trunk mat on the market (Mustang mats will not fit). Made of heavy die-cut vinyl with correct gray and black plaid pattern. The opening for the spare tire is not cut out, just in case that your Cougar has the space saver spare tire. You will need to carefully transfer the hole and cut it out yourself with a blade.Do NOT confuse this with the light duty mat you will see elsewhere listed for the same money or less. The budget mats you see...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 53223 -

Replacement U-nut or clip for any 1967-70 Mercury Cougar trunk lid. These slide into the bottom of the trunk lid for attaching the hinges. Correct 5/16-18 threads, 7/8" from center of hole to edge. 4 total per trunk lid, sold individually.

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30674 -

Curved aluminum cable guide as seen on page 13 of the sun roof manual. Golde part number 100 413 681

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30486 -

Curved aluminum cable guide as seen on page 13 of the sun roof manual. Golde part number 100 413 682

$0 Price: $61.85

Buy Details

Availability: In-Stock Item
Item #: 11724 -

Most times you do not need new hinges but rather new bushings and pins. If your hinges are such that the holes are "hogged out" and no longer seat the bushing firmly then you will need to buy one of our good used hinges that come with new bushings and pin. These overseas hinges are not known for fitting well, we cannot recommend them and we do not accept returns or exchanges on them. Replaces Ford part #: D0ZZ-6522800-A. ...

$0 Price: $239.85

Buy Details

Availability: In-Stock Item
Item #: 33601 -

Reproduction front valance for all 1969 - 1970 model Cougars.  Replaces Ford part # C9WY-17620-A. Fits: 1969 Mercury Cougar1970 Mercury Cougar This is our latest (and youngest) new hire! This is JD Rush who was named in part after his Great Grandfather, Jack Donald Rush who got me (Don Rush) interested in old cars at a very young age. My Grandfather was part owner of Mount Hood Motors / Wrecking & Towing for a number of years and I have fond memories as a boy of exploring the yard. Now...

$15.00 Price: $18.45

Buy Details

Availability: In-Stock Item
Item #: 25966 -

Complete four piece door vapor barrier kit specifically cut for the year of your Cougar.

$0 Price: $459.85

Buy Details

Availability: In-Stock Item
Item #: 12-3002 -

High quality reproduction black vinyl top for the Mercury Cougar that features both the correct pattern and finish. This concours correct top also features a durable moisture resistant backing that will look better and last longer than our economy priced version. This unit is for the Cougar owner who demands premium correct parts for his or her prized feline. AT PRESENT, THIS TOP HAS A PRODUCTION TIME OF 3 MONTHS. Thinking about installing this unit yourself? Check out our video below for some...

$150.00 Price: $167.75

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15017 -

A quality reproduction black vinyl top that looks and fits great. This top has the correct pattern, however the finish is a bit shinny and will not look original to the discriminating eye. This top will also have a seam in the A pillar.

$0 Price: $335.85

Buy Details

Availability: In-Stock Item
Item #: 12-3003 -

High quality reproduction black vinyl top for the Mercury Cougar equipped with a factory sunroof that features both the correct pattern and finish. This concours correct top also features a durable moisture resistant backing that will look better and last longer than our economy priced version. This unit is for the Cougar owner who demands premium correct parts for his or her prized feline.Thinking about installing this unit yourself? Check out our video below for some inspiration. ...

$0 Price: $332.33

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12-3006 -

High quality reproduction white vinyl top for the Mercury Cougar that features both the correct pattern and finish. This concours correct top also features a durable moisture resistant backing that will look better and last longer than our economy priced version. This unit is for the Cougar owner who demands premium correct parts for his or her prized feline. Thinking about installing this unit yourself? Check out our video below for some inspiration. Below are some comparison shots to show...

$0 Price: $309.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12-3007 -

High quality reproduction white vinyl top for the Mercury Cougar with sunroof that features both the correct pattern and finish. This top features a durable moisture resistant backing that will look good and last long.  Thinking about installing this unit yourself? Check out our video below for some inspiration. Below are some comparison shots to show the different textures of vinyl tops, including an original 1967 vinyl top for reference. We currently do not carry the...

$11.99 Price: $13.37

Buy Details

Availability: In-Stock Item
Item #: 26151 -

This is an exact replacement for a 1970 remote sport mirror. Nearly indistinguishable from a 1968. Obviously a larger ball and longer than found on 1969, 1971-73 remote mirrors. This threaded replacement wand will require you to cut 8/32" fine threads in your original controller. Your OEM mirror controller is made of a very soft metal so one can often install these as "self tapping".1967 and 1968 are different, see comparison picture. The 1968 version was rounded off due to new safety...