Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 289-336 of 429
$0 Price: $20.05

Buy Details

Availability: In-Stock Item
Item #: 42006 -

Good quality, does have the built in rubber grommet that seals the cable as it passes through the firewall.

$0 Price: $16.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0044 -

Used clip with bolt for attaching the speedometer cable to the transmission of the Mercury Cougar or Ford Mustang. This unit holds the gear end into both automatic and manual transmissions. Automatic codes W - C4, X - FMX, U - C6, 1 - 3 speed manual, 5 or 6 - 4 speed manual.

$0 Price: $0.35

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33753 -

This screw attaches the speedometer / odometer to the instrument cluster housing. Two needed per speedometer, fits all years of Cougar 1967-73. This is an 8-32 x 3/8" hex flange head machine screw with captured washer. Sold individually. 

$0 Price: $20.55

Buy Details

Availability: In-Stock Item
Item #: 14966 -

Fits the 1967, 1968, 1969 and 1970 Mercury Cougar with the 390, 427, 428CJ or 428SCJ. These have the correct 20 coil spring, but are 1/8" longer than the Ford Master Parts Catalog calls for. Replaces Ford Part #:C7ZZ-7591-AR.

$0 Price: $20.05

Buy Details

Availability: In-Stock Item
Item #: 41540 -

This attaches to the bracket mounted on the top side of your pedal hanger over to the clutch pedal itself. Replaces Ford Part #: C2AZ-7534-A.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41374 -

This gives the thumb release button in your T shaped shift handle its tension. If it is rusted then your button will not return back to its outer position easily. Fits 1967-73 Mercury Cougar and 1965-73 Ford Mustang. Technically this spring fits all Ford and Mercury floor shifters 1965-73. Ford part number C5ZZ-7C300-A. The MPC shows this spring to have a free length of 2-1/16 inches.

$0 Price: $14.85

Buy Details

Availability: Rare / NOS Part
Item #: 33469 -

New Old Stock 1967-68 Mercury Cougar and 1966-68 Ford Mustang clutch release fork to equalizer spring. Upper clutch equalizer to firewall, 289 and 302 engines. This unit will also work for 1969-70 Cougar and has the correct spring hook orientation. 66 - 68 Ford specs: 3-1/16" Long 40 Coils 69 - 70 Ford specs: 3-1/8" Long 36 Coils Ford part #: C6ZZ-7591-A.

$0 Price: $5.91

Buy Details

Availability: In-Stock Item
Item #: 41549 -

Exact reproduction of the 1967-68 Mercury Cougar and 1966-68 Ford Mustang clutch release fork to equalizer spring. Upper clutch equalizer to firewall, 289 and 302 engines. This unit will also work for 1969-70 Cougar and has the correct spring hook orientation. 66 - 68 Ford specs: 3-1/16" Long 40 Coils 69 - 70 Ford specs: 3-1/8" Long 36 Coils Replaces Ford part #: C3DZ-7523.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 42396 -

Z bar return spring for all 1967-68 Mercury Cougar and Ford Mustang. This is the upper spring, proper color and spring tension from original. This is the economy version of the concours spring above. Made in China.

$0 Price: $30.95

Buy Details

Availability: In-Stock Item
Item #: 10616 -

Description: The Ford Master Parts Catalog calls this "Bracket - Clutch Release Lever Retracting Spring". This little "L" shaped bracket is found only on 1967 - 1968 Mercury Cougars and Ford Mustangs with a 3 or 4 speed manual transmissions. When people part out early Cougars they often leave this little detail item behind not fully understanding its function or rarity. Stood on end its length at the very longest point is 3 1/4". Its function is to but tension on your equalizer bar when it is...

MSRP:$6.00
$6.00 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 14100 -

Injection molded plastic stops underdash squeaking from clutch pedal return spring. 2 required per car. Replaces Ford Part #: C1DZ-7A630-A

$0 Price: $4.95

Buy Details

Availability: In-Stock Item
Item #: 41262 -

Stud for attaching heat shield to passenger side exhaust manifold. Fits all 1968 Mercury Cougar or Ford Mustang and other Ford too. Sold individually. Phosphate & Oil (gray-black)

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24277 -

This used brake pedal support bracket is the correct hanger for a 1967-68 Mercury Cougar or Ford Mustang with manual drum front brakes. If you have a manual transmission car with worn out clutch bushings, this is a great replacement part for you as it will have been removed from an automatic transmission equipped car. This means the clutch bushings will be in mint, unused condition. Ford part # C7ZZ-6501508-C. *NOTE* Manual brake supports are different. Manual brake supports have four threaded...

$0 Price: $69.55

Buy Details

Availability: Out of Stock
Item #: 41562 -

C7ZZ-15520-C Backup lamp switch that mounts to the factory 3 speed shifter linkage. 67 - 68 Mercury Cougar and Ford Mustang applications. Autolite or Motorcraft switch number SW-573.*Note - 3 speed switches are different than the 4 speed switches.

$0 Price: $57.35

Buy Details

Availability: In-Stock Item
Item #: 14317 -

Reproduction backup lamp switch that mounts to the factory 4 speed shifter linkage. 67 - 68 Mercury Cougar and Ford Mustang applications. Autolite or Motorcraft switch number SW-561. Replaces Ford part number C7ZZ-15520-A.*Note - 4 speed switches are different than the 3 speed switches.

$0 Price: $75.02

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18696 -

Tested and inspected neutral safety switch for the C-4 and C-6 transmissions installed in 1967-69 Mercury Cougar and 1967-69 Ford Mustangs. Look for a transmission code of W or U on your door data plate. If your car has a code X, your original transmission was an FMX and uses a different neutral safety switch.Replaces Ford Part #: C7DP-7A247-A, C8ZP-7A247, C9ZZ-7A247-C, SW 887.Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 13909 -

High quality alternative to the expensive OEM switch. If you have an early 67 the plug may be the dual type which is also listed on this site. This will work with your C-4 or C-6 automatic transmission. The only real difference is that this switch does not come with the FoMoCo logo or part number on it. Replaces Ford Part #: C9ZZ-7A247-B, SW 877 

$0 Price: $893.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30488 -

Ultra rare C-6 transmission cast iron tail shaft for any 428 Cobra Jet or 429 Cobra Jet. Nice condition, has casting number RT-C8OP-7A040-A on side as shown. 1968-71 Mercury Cougar, Ford Mustang and Torino / Cyclone / Ranchero with Q or R code 428CJ engines including 428SCJ engines. J and C code 429CJ engines too for 1970-71.Ford MPC number C8OZ-7A039-B.

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0016 -

Used C-4 transmission tail shaft or housing extension as Ford called them in the Master Parts Catalog. Fits all 1967-68 Mercury Cougar and 1967-69 Ford Mustang cars with transmission code W on the door tag. Cast aluminum construction, the 1968 Cougar version will have the provision for mounting the damper weight on the bottom. Replaces Ford part number C6DP-7A040-A.

$0 Price: $5.95

Buy Details

Availability: In-Stock Item
Item #: 14-0035 -

New blue removable strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

$0 Price: $12.15

Buy Details

Availability: In-Stock Item
Item #: 14-0027 -

New red permanent strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27465 -

Clip for mounting the throttle linkage rod rod to the carburetor and mounts C-4 or C-6 throttle cables to the throttle bell cranks.Replaces Ford part number C2VY-9826-A.

$0 Price: $27.25

Buy Details

Availability: In-Stock Item
Item #: 15317 -

Nice quality hardware for attaching the shift rods to the bottom of the shifter mechanism. Won't work with the 1970-73 Hurst shifters, but does work with all of the others. Including 3 speeds, sorry, sold in packages of 3 though. Check out our video on rebuilding your shifter below: ...

$0 Price: $225.33

Buy Details

Availability: In-Stock Item
Item #: 33195 -

Rebuilt C4 24 spline torque converter for the 1967 - 68 Mercury Cougar or 1966 - 69 Ford Mustang. This item carries a $200 core charge, refundable when we receive your rebuildable core. Ford part number C6AZ-7902-M. What does it mean to “rebuild” a torque converter? When there are problems with a car’s automatic transmission, sometimes it’s the torque converter. It could be fluid loss, bent vanes, or bad bearings among other problems. We have a local shop with decades of...

$0 Price: $225.33

Buy Details

Availability: In-Stock Item
Item #: 33686 -

Rebuilt small block C6 Ford transmission torque converter for the 1971-73 Mercury Cougar and Ford and Mustang. 31 splines and 1.375" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. Fits small block C6 transmissions, typical for 351C engines and others when equipped with "U" code transmission and H, or M code engines 1971-73. Has 11.5 inch circle diameter for the flex plate studs, Ford part number D1AZ-7902-A....

$0 Price: $225.33

Buy Details

Availability: In-Stock Item
Item #: 33196 -

Rebuilt C6 FE Engine torque converter for the 1967 - 70 Mercury Cougar and 1966-70 Ford and Mustang. 31 splines and 1.848" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. 1966-70 Ford FE engines include: 352, 360, 390, 427, 428, etc. Ford part number C8OZ-7902-A. What does it mean to “rebuild” a torque converter? When there are problems with a car’s automatic transmission, sometimes it’s the torque converter. It...

$0 Price: $729.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12146 -

This kit is an easy way to covert your 289 / 302 / 351W engine from a C4 or C6 transmission to an Automatic Overdrive Transmission. Kit includes: Cross memberTrans Mount InsulatorSlip YokeKick Down CableFlex Plate AOD Shift Linkage This is just the kit, and does not include the full transmission!

$0 Price: $600.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13370 -

Core C4 transmission for a 1968 Mercury Cougar or Ford Mustang. Tag number PEE-S. Floor shift C4 Transmission.  Core transmission only, No bell housing, dip stick, dip stick tube, vibration dampener, or torque converter. This is a rebuildable core transmission, removed from a 1968 Mercury Cougar with J code 302-4V engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.

$0 Price: $1,050.00

Buy Details

Availability: Out of Stock
Item #: 23554 -

Core C6 transmission for a 1968 Mercury Cougar or Ford Mustang, with X code 390-2V engine. Tag number PGA-S. Floor shift C6 Transmission. Core transmission only, NO dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1968 Mercury Cougar with 390-2V engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.

$0 Price: $1,200.00

Buy Details

Availability: Out of Stock
Item #: 24826 -

Core C6 transmission for a 1968 Mercury Cougar or Ford Mustang, with S code 390-4V engine. Tag number PGA-P2. Floor shift C6 Transmission. Core transmission only, NO dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1968 Mercury Cougar with 390-4V engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.

$0 Price: $3,200.00

Buy Details

Availability: Out of Stock
Item #: 33206 -

Core C6 transmission for a 1968 Mercury Cougar or Ford Mustang, with R code 428CJ engine. Tag number PGB-AF. Floor shift C6 Transmission. Core transmission only, NO dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1968 Mercury Cougar with 428CJ engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.

$0 Price: $95.76

Buy Details

Availability: Out of Stock
Item #: 19872 -

Reproduction transmission cooling lines made of OE steel for the Mercury Cougar or Ford Mustang equipped with a V-8 engine and the C-6 automatic transmission. These lines are sold in pairs.

$0 Price: $99.92

Buy Details

Availability: In-Stock Item
Item #: 27552 -

New manufactured transmission oil pan for the Ford C6 transmission as found on 1967-73 Cougar and Mustangs, big block and small block engines. Very high quality heavy gauge steel.Replaces Ford part number C6AZ-7A194-A.