Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Becasue of extreme wildfire conditions, we are under LIMITED Staff and LIMITED Hours Restrictions.
Orders may be delayed for the next two weeks.
We now require a $25 $5* minimum website order (Read More)
loading . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 363
Price: $249.85

Buy Details

Availability: Standard Dropship
Item #: 19899 -

Reproduction "A" pillar repair panels for your 67 - 68 Cougar or Mustang. Included in this kit are the two pillar patches and four backing plates for the door hinges.

Price: $59.85

Buy Details

Availability: Standard Dropship
Item #: 30963 -

Reproduction driver side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $59.85

Buy Details

Availability: Standard Dropship
Item #: 30962 -

Reproduction passenger side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $2.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0267 -

Ford called this small door latch part an adjuster. It threads onto the bottom of the door latch rod inside the door. Common to most Ford products 1965-1970. Ford part number C5AZ-62218106-A.

Price: $3.85

Buy Details

Availability: Normal Stock Item
Item #: 26674 -

These keep the trunk hinge spring rods from rattling. Replaces Ford part #C5ZZ-6545028.Check out our trunk torsion bar installation video below:

Price: $17.85

Buy Details

Availability: Normal Stock Item
Item #: 26779 -

Reproduction of the protector felt pad between the spare tire and jack handle for the 68 through 70 Mercury Cougar with styled steel wheels. Used only in conjunction with applications that store the jack components on top of the wheel.

Price: $12.85

Buy Details

Availability: Normal Stock Item
Item #: 10090 -

Reproduction driver side (left hand) rear apron extension for 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42236 -

Although many would disagree, these are in my opinion average quality. "BUT" they are the best reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford part # C8ZZ-6524100 and C8ZZ-6524101. *NOTE* The Ivy Gold and Aqua armrests...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42237 -

Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard Cougar's. We also have NOS and used available in most colors. I know it will cost us sales by being blunt about the quality on some of these items, but after using these...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42215 -

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made. Replaces Ford part # C8ZZ-6524100-BK.

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42239 -

Unlike the light blue found on a Cougar this is the darker blue used on the 1968 Mustang. The light blue is not available. This is a good match to the darker blue accents found on the 1968 standard and decor Cougar interior. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard Cougar's. We also have NOS and used available in most colors. I know it will cost us sales by being...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42216 -

Unlike the light blue found on a Cougar this is the darker blue used on the 1968 Mustang. The light blue is not available. This is a good match to the darker blue accents found on the 1968 standard and decor Cougar interior. Color on these is inconsistent and never spot on to the original. No returns on this item.

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42242 -

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford part # C8ZZ-6524100 and C8ZZ-6524101. Color on these is inconsistent...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42241 -

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue, Parchment, Ivy Gold, Aqua, Saddle, or Nugget Gold. Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101. *NOTE* The Ivy Gold and Aqua armrests are not correctly colored...

MSRP:$27.85
Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42244 -

Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard Cougar's. We also have NOS and used available in most colors. I know it will cost us sales by being blunt about the quality on some of these items, but after using these...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42221 -

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101. ...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 42219 -

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101 Color on these is inconsistent...

Price: $0.85

Buy Details

Availability: Normal Stock Item
Item #: 30254 -

Bolt with toothed washer for attaching 1967-68 Mercury Cougar and Ford Mustang door window parts. Both of the door window rear stops, and rear door guide. 1/4-20 bolt threads.

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 41302 -

These reproduction fender to pillar bracket bolts fit both the Standard and XR7.

Price: $3.85

Buy Details

Availability: Normal Stock Item
Item #: 41312 -

These reproduction hood latch catch bolts fit both the Standard and XR7.

Price: $6.85

Buy Details

Availability: Normal Stock Item
Item #: 41304 -

Reproduction bolts for the deck/trunk lid latch for the Mercury Cougar or Ford Mustang. This is a set of five bolts and will fit both the standard and XR7. Thinking of replacing this part yourself? Check out our video below for a head start!

Price: $15.85

Buy Details

Availability: Out of Stock
Item #: 13802 -

Reproduction Sun Visor Bracket & Rod for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang. Great quality and fit, left and right use same part, sold separately. Replaces Ford part # C7AZ-6204144-A.

Price: $69.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31216 -

Bracket tack welded in the trunk to reinforce the rear structure for mounting the rear bumper. Ford part number C7ZZ-17B862-A, fits all 1967-68 Mercury Cougar and Ford Mustang. These are sold individually, these are not side specific. There is also a reproduction version available. Used part cut from a 1967-68 Mercury Cougar, some spot welds will need to be drilled out on your end. Picture shows approximately what you will receive. 

Price: $14.85

Buy Details

Availability: Normal Stock Item
Item #: 31217 -

These brackets weld in the trunk to reinforce the rear structure for mounting the rear bumper. Ford part number C7ZZ-17B862-A, fits all 1967-68 Mercury Cougar and Ford Mustang. These are sold as a pair, these are not side specific. 

Price: $4.85

Buy Details

Availability: Normal Stock Item
Item #: 26068 -

These are the plastic brackets that screw to you roof and then slide the vinyl colored piece over. Sold individually, four are required per car. Replaces Ford part # C8AZ-6229232.

Price: $4.85

Buy Details

Availability: Normal Stock Item
Item #: 26065 -

Sold individually, black only. We have an array of colors in good used condition used. We also have the hard plastic bracket that this slips over. Four are required per car. Replaces Ford Part #: C8AZ-6229024-A.

Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24316 -

Used drivers side (left hand) rust free part that is rarely seen in this condition outside of the West Coast region. Comes as taken from parts car.Ford part # C7ZZ-3383-A.

Price: $529.85

Buy Details

Availability: Standard Dropship
Item #: 11686 -

Complete floor pan for the 1965-68 Ford Mustang. NOTE: Can be made to fit 67-78 Cougar, Included seat risers are Mustang versions, which are taller than the Cougar seat risers. We recommend re-using your original Cougar seat risers, unless you want the extra height of the Mustang risers. Also note that the risers included with this floor pan will not be attached, you'll have to weld them on. Keep in mind Cougar has a longer wheel base which make the portion under the back seat substantially...

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 14331 -

This plastic socket is very brittle and almost always breaks when installing a new door jamb switches. Does not fit cars with Warning Group with door ajar option. Simply install by carefully breaking the old brittle plastic socket apart with pliers to free up the wire leads and plug wire leads into the new socket.

Price: $59.85

Buy Details

Availability: Normal Stock Item
Item #: 26760 -

These were never offered originally but are a popular accessory and more cost efficient than buying a replacement for that unsightly old wheel and tire you took from a Granada in the bone yard!

Price: $70.85

Buy Details

Availability: Normal Stock Item
Item #: 26762 -

These were never offered originally but are a popular accessory and more cost efficient than buying a replacement for that unsightly old wheel and tire you took from a Granada in the bone yard!

Price: $52.50

Buy Details

Availability: Normal Stock Item
Item #: 13964 -

If your Cougar has to sit outside for any length of time this is a must. Not only will it protect from unwanted moisture but pine needles and other debris will be kept out. If your cowl already leaks then this is a great way to prevent the floors from rusting. Spring loaded T shaped fasteners make for instant installation and removal, attaches under grate bars so as not to damage paint. Very worth while preventative maintenance item.

Price: $234.85

Buy Details

Availability: Standard Dropship
Item #: 11688 -

Get ready for some serious labor if your car needs this complete panel!

Price: $26.85

Buy Details

Availability: Normal Stock Item
Item #: 25963 -

This kit is good for cowls with moderate to minimal rust. Easy to install on the driver side, but takes more effort on the passenger side especially if you have A/C. Another way to avoid doing expensive cowl repairs is to purchase our cowl cover.

Price: $65.85

Buy Details

Availability: Normal Stock Item
Item #: 11372 -

This is the reproduction cross member offered by most of the Mustang vendors. It is over 1.5 Lbs lighter than the factory cross members. We highly recommend purchasing our remanufactured, re-enforced cross member. It is crucial that you use the correct tapered bolts when installing these.

Price: $93.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11373 -

Good original part that has not been noticeably twisted, bumped, bent, or heavily rusted. Notice the factory indentations that are a result of the manufacturing process (dent from jig). Also know that there is always at least a couple minor dings or scrapes from decades of being the lowest point of the car. Much better fit than repro and note the repro is made from thinner gauge steel. Also know that we generally do not bead blast our used parts before sending them but often we show them on...

Price: $32.85

Buy Details

Availability: Normal Stock Item
Item #: 11383 -

This reproduction radiator support crossmember is correct for the 1967-68 Mercury Cougar and Ford Mustang, but will work on any 1967-70 Cat or Pony.Replaces Ford # C7ZZ-6510852-B or C9ZZ-6510852.

Price: $963.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27223 -

1968 Front unibody cut, these 1968 front structures have two torque boxes, unlike the 1967 with only one. This item has the cowl cutouts for factory air conditioning. No shock tower reinforcing, consider 1969 front cuts if you desire the bracing.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of...

Price: $963.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27224 -

1968 Front unibody cut, these 1968 front structures have two torque boxes, unlike the 1967 with only one. This item does not have cowl cutouts for factory air conditioning. No shock tower reinforcing, consider 1969 front cuts if you desire the bracing.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours...

Price: $743.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20184 -

Comes with good shock towers, front aprons, and core support. This is a great value for those that need to replace multiple parts upfront as you will not only get factory joined parts that will save you money and time, but it will also  preserve the value of your car. With a clean Western cut like this, one should be able to install it so that nobody would ever know your car has had anything replaced. You will have to call to order this one. Expect to pay about $300 for crating and...

Price: $1.50

Buy Details

Availability: Normal Stock Item
Item #: 26471 -

Replaces Ford part #C8AZ-6223362-A. Sold individually, four required per car, used on most Ford products. We often get calls like "How do I remove my front window cranks?" Unlike the rear cranks that are held on by an Allen set screw, the fronts have a Phillips screw under this decal. If you are careful, often you can reuse your original and glue it back in place.

Price: $16.85

Buy Details

Availability: Normal Stock Item
Item #: 13870 -

This is the assembly that your inside door handle attaches to and features all new components. They are gold cadmium plated to resist rust and corrosion. *NOTE* We have had complaints of these not fitting as well as originals, therefore we suggest buying our used units. Rod retainers not included. Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers shown can be typed in to the search bar on our site. (Click image to view full size) ...

Price: $15.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0439 -

Good used 'Control and Link Assembly - Door Latch Remote' as Ford calls these. This is the splined shaft assembly located just forward of the arm rest used to mount your interior door release handle for the left or driver side door. These excellent used shafts are not only less money than the reproduction but the quality and fit is superior in all ways. We do not endorse the reproductions due to customer feedback being less than stellar. Comes with the retainer for the door latch rod as shown....

Price: $30.85

Buy Details

Availability: Normal Stock Item
Item #: 23474 -

These are the assemblies that your inside door handle attaches to and features all new components. They are gold cadmium plated to resist rust and corrosion. *NOTE* We have had complaints of these not fitting as well as originals therefore we suggest buying our used units. Rod retainers not included.

  • < Prev
For your convinence, you can view this page on our old site by the following link:
View Page On Old Site.