Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 49-96 of 429
$0 Price: $19.45

Buy Details

Availability: In-Stock Item
Item #: 31235 -

Reproduction bolts and washers for the manual transmission bell housing on any 1967-68 Cougar or Mustang equipped with a 289 / 302 engines and either 3 or 4 speed manual stick shift transmissions. Bell housing to engine block bolts. Fits most all other Ford small block V-8's from 1967-68.

$0 Price: $21.25

Buy Details

Availability: In-Stock Item
Item #: 30489 -

Reproduction bolts and washers for the manual transmission bell housing on any 67 - until 2/1968 Cougar or Mustang equipped with a 390 / 428.

$0 Price: $21.25

Buy Details

Availability: In-Stock Item
Item #: 31234 -

Reproduction bolts and washers for the manual transmission bell housing on mid , like Feb 1968 - 1970 Cougar or Mustang or other Ford car equipped with a 390 / 428 engines. Bell housing to engine block bolts.

$0 Price: $8.95

Buy Details

Availability: In-Stock Item
Item #: 32159 -

Four of these bolts are used to secure the isolator portion of the engine mounts to the 289/302/351 blocks. Includes 351W and 351C engines. 5/8" hex head bolt. Sold as a set of 4. Concours phosphate & Oil (gray-black).

$0 Price: $5.18

Buy Details

Availability: In-Stock Item
Item #: 12356 -

New set of bolts for fastening the transmission inspection cover on all 1967-70 Mercury Cougar, Ford Mustang, and Ford anything with 390, 428CJ, and 352 or any FE style Ford engine. Includes 3 and 4 speed transmissions.

$0 Price: $2.85

Buy Details

Availability: In-Stock Item
Item #: 30548 -

Pair (2) Bolts for securing the inspection cover for any C-4 automatic transmission 1967-68 Mercury Cougar or 1965-70 Ford Mustang. Additionally also fits FMX transmissions 1969-73 Mercury Cougar.or Ford Mustang.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 11295 -

Replacement rubber bushing for repairing any automatic shift arms on any 1967-73 Mercury Cougar or Ford Mustang, and most Fords with automatic floor shift levers. Fits arms with 3/4 inch lower holes for attaching transmission shift rods. Replaces Ford part number C7ZZ-7343 Check out our video on rebuilding your shifter below: ...

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 42136 -

These reproduction brake and clutch pedal bushings are made from high strength plastic that is wear resistant. Two are required for automatic cars, four for manual transmission cars. Sold as a pair. Replaces Ford part # B7AZ-2471-A.

$0 Price: $10.00

Buy Details

Availability: In-Stock Item
Item #: 33067 -

Reproduction pair of brass 3/8 ID bushings for the clutch rod. Protects clutch equalizer and rod, and removes excess play.We also sell these in nylon. Replaces Ford Part #: C0AZ-7526-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where in specs when I was replacing my valve cover gaskets. No one I called could tell me because it...

MSRP:$1.20
$1.20 Price: $1.15

Buy Details

Availability: In-Stock Item
Item #: 14249 -

(7526) Nylon plastic injected. Correct original design. Protects clutch equalizer and rod, and removes excess play. These are to put on either end of your clutch pedal rod. Sold individually. If your going to do both ends you will need to order 2 of these.Replaces Ford Part #: C0AZ-7526-B.Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they...

$0 Price: $159.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0081 -

Bare cast aluminum C4 transmission case from a 1967-68 Mercury Cougar or Ford Mustang. Inspected for damage. Replaces Ford part number C6DP-7006-A.

$0 Price: $48.47

Buy Details

Availability: In-Stock Item
Item #: 41553 -

This bezel was never offered from the factory on a Cougar but is a very attractive part for those with a manual transmission and no console. Works with rubber or leather shift boot, three or four speed manual transmission. Check out our video on rebuilding your shifter below: ...

$0 Price: $1.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41771 -

Reproduction Lower Radiator Core Support Loom Clip for the 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang 

$0 Price: $3.95

Buy Details

Availability: In-Stock Item
Item #: 14314 -

This is the speedometer cable clip that connects to the firewall and transmission tunnel. Replaces Ford Part # : 373829

$0 Price: $22.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32189 -

Used clip for mounting the vacuum modulator steel line or tube on 1967-68 Mercury Cougar or Ford Mustang with C4 or automatic transmission. Mounts under one of the top bolts where the bell housing connects to the engine block. This is not a reproduced part, that we know of.  The basic Ford part number is 7C072.

$0 Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 14967 -

(7521) The attaches to the bottom leg of your equalizer bar and the pointed end fits into the recess of your clutch fork. Replaces Ford Part #: C7ZZ-7521-L.

$0 Price: $30.95

Buy Details

Availability: In-Stock Item
Item #: 31837 -

Economy version of the clutch adjusting rod that fits the 1968, 1969, and 1970 Mercury Cougar with the 390GT, 428CJ or the 428SCJ. Replaces Ford Part #: C8ZZ-7521-BR. Can be used on 1967 3 or 4 speed cars with 390 engine, but must use the 1968 clutch fork, see item 13882.

$0 Price: $47.65

Buy Details

Availability: In-Stock Item
Item #: 41718 -

Reproduction premium adjusting rod which includes: 2 Lock Nuts 1 Spacer 1 Retaining Clip Fits the 1968, 1969, and 1970 Mercury Cougar with the 390GT, 428CJ or the 428SCJ. Replaces Ford Part #: C8ZZ-7521-BR. Can be used on 1967 3 or 4 speed cars with 390 engine, but must use the 1968 clutch fork, see item 13882.

$0 Price: $63.65

Buy Details

Availability: In-Stock Item
Item #: 14310 -

Equalizer bar or "Z" bar for small block engines with a manual transmission. Both 3 and 4 speed manual transmissions. Replaces Ford part number C7ZZ-7528-G.

$0 Price: $100.00

Buy Details

Availability: In-Stock Item
Item #: 41577 -

Nice reproduction of the original. Street name is Z-Bar. For all 1967 - 1970 FE engines 390 and 428CJ. Replaces Ford part #: C7ZZ-7528-B.

$0 Price: $59.95

Buy Details

Availability: In-Stock Item
Item #: 41406 -

C5OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long. Specifically used with a 157 tooth flywheel, as opposed to the 164 tooth fly wheel used after Feb 1968.Replaces ford Part # C5OZ-7515-B.  Cougar before 2-15-1968, 289/302 Engines.  Mustang before 2-15-1968, 289/302 Engines. *Note - This style of clutch fork uses the 'wire' for the holder, not the clip. ...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 16-0041 -

C5OZ-7515-B Manual transmission clutch fork for small block V8 engines - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long from the divot where the rod rides to the tip of the forked end. Specifically for the C5DA-6394-A bellhousing that used a 157 tooth flywheel. Cougar 1967 through 2-15-1968. XR7, XR7-G. Mustang 1965 through 2-15-1968. 2+2, GT. Fairlane 1965 through 2-15-1968. 500, XL, Custom. Torino / Ranchero 1968 through 2-15-1968. 500, XL Comet 1965 through...

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 41445 -

C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 9 1/4 from divot to fork end. Specifically used with a 157 tooth flywheel, as opposed to the 164 tooth fly wheel. Replaces ford Part # C8OZ-7515-A, alternate number C8OA-7541-A.  Cougar after 2-15-1968 - 1969, 289/302 Engines.  Cougar 1969, 351 Engines.  Mustang after 2-15-1968, 289/302 Engines.  Mustang 1969, 250/302/351 Engines.  Fairlane after 2-15-1968, 289/302...

$0 Price: $83.88

Buy Details

Availability: Out of Stock
Item #: 16-0042 -

C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 10-1/2 inches long from the divot where the rod rides to the tip of the forked end. Specifically used with a 164 tooth flywheel, as opposed to the 157 tooth fly wheel used before Feb 1968. Replaces Ford part number C8OA-7541-A. Ford casting number C8OZ-7515-A. New reproduction small block fork also available here. Cougar after 2-15-1968 - 1969, 289/302 Engines.  Cougar 1969, 351...

$0 Price: $103.65

Buy Details

Availability: In-Stock Item
Item #: 14233 -

Replaces Ford part number C8OZ-7515-D. Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-D.

$0 Price: $315.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24438 -

C8OZ-7515-D Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-D. Cougar 1968 - 1969, 428 Cobra Jet engines.  Mustang 1968 - 1969, 428 Cobra Jet engines.  Fairlane 1968 - 1969, 428 Cobra Jet engines.  Torino / Ranchero 1968, 428 Cobra Jet engines. Montego / Cyclone 1968 - 1969, 428 Cobra Jet engines. *Trivia - This fork originally had a blue paint mark for identification purposes. This model clutch fork...

$0 Price: $103.65

Buy Details

Availability: In-Stock Item
Item #: 13882 -

C8OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-B. Cougar after 2-15-1968 - 1969, 390 Engines. 390IP. Mustang after 2-15-1968 - 1969, 390 Engines. 390IP. Fairlane after 2-15-1968, 390 Engines. Torino / Ranchero after 2-15-1968 - 1969, 390 Engines. Comet after 2-15-1968 - 1969, 390 Engines. Montego after 2-15-1968 - 1969, 390 Engines. ...

$0 Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 41551 -

Used until early (prior to 2/15/1968) on manual transmission cars. Comes with rivets. Replaces Ford part #: B9AZ-7522-B.This style uses the early clutch fork with the anti rattle wire.

$0 Price: $236.75

Buy Details

Availability: In-Stock Item
Item #: 32757 -

Manual transmission clutch kit for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is a 10 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.

$0 Price: $309.68

Buy Details

Availability: In-Stock Item
Item #: 32758 -

Manual transmission clutch kit for all 1967-69 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 390 engines. This is a 11 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.

$0 Price: $233.33

Buy Details

Availability: In-Stock Item
Item #: 26772 -

This pedal assembly is a copy of the 1967 clutch pedal. It can be used on 1968 with no modifications. Fits all engine applications. Has replaceable shaft as shown. Replaces Ford Part #: C7ZZ-7519-A.

$0 Price: $248.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24552 -

C8ZZ-7519-B We also offer used clutch pedals along with our quality reproduction 1967-1968 clutch pedal. These pedals will no doubt show some wear around the clutch rod holes. Three and four speed pedals are all the same. Mustang is the same too.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 11798 -

Bumper that helps stop the 'clunk' noise when you take your foot off of the clutch pedal on manual transmission 67 - 68 Cougars and Mustangs.Replaces Ford Part Number: C7ZZ-7583

$0 Price: $70.16

Buy Details

Availability: In-Stock Item
Item #: 33278 -

This kit has everything you need to repair your clutch and brake pedal and pedal support in one easy kit. Repairs 1967-73 Mercury Cougar or 1965-73 Ford Mustang. Plus many other Ford cars.This kit requires welding. For use on pedal hangers that are all wallered out, or 1971-73 pedal hangers that are not round. Kit has roller bearings. Quality Scott Drake / Holley product. *Hint - All 1967-70 brake pedal hangers have the clutch pedal shaft bushings, even the automatic cars. The originals are...

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 41494 -

This reproduction stainless trim mounts over your pedal pad. Not only adds style but also holds your pad in place. Replaces Ford part number C5ZZ-7B544-A.