Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Becasue of extreme wildfire conditions, we are under LIMITED Staff and LIMITED Hours Restrictions.
Orders may be delayed for the next two weeks.
We now require a $25 $5* minimum website order (Read More)
loading . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 123
Price: $7.85

Buy Details

Availability: Normal Stock Item
Item #: 16000 -

Reproduction diaphragm pump that mounts on the front all 67 - 73 Cougar or Mustang Autolite 2V carbs as well as 1967 Autolite 4V Carbs. With today's gas, these commonly fail, especially when sitting for extended periods of time. Complete failure will cause fuel leaks, but many times these will affect performance well before a leak actually starts. Good idea to replace every few years or if sitting for 6 months or more. Replaces Ford Part #: C4AZ-9B559-A.

Price: $33.85

Buy Details

Availability: Normal Stock Item
Item #: 23969 -

Reproduction concours correct throttle return spring bracket for the Mercury Cougar or Ford Mustang equipped with the 390GT engine. This bracket is shorter in length than the 390-4V piece.Ford part number C7OZ-9741-B.Also good for 1968-1/2 - 428CJ.

MSRP:$10.00
Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 30513 -

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The benefit of using this foam float, is that sometimes the hollow brass float will leak, causing a bad reading. This foam version of the float is fuel resistant and will never leak.Replaces Ford part #C0AZ-9202-B.

MSRP:$10.00
Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 14258 -

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The problem with these brass floats, is that after year of being in contact with fuel, they will begin to corrode and disintegrate. We suggest going with the new foam floats. They are fuel resistant and will last longer. Find it here. Replaces Ford part #C0AZ-9202-B. ...

Price: $39.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24351 -

8A AN Carburetor core. Autolite 2100 carburetor. 1.23" venturi Good core, at least 95% complete.  Ford master parts catalog says that it is for a 1968 Ford or Mercury full size with 390-2V. Automatic transmission and IMCO emissions.Ford Part #: C8AF-9510-AN

Price: $145.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24521 -

1968 289 and 302-2V Autolite 2100 carburetor, automatic C4 transmission - All 50 states. C8ZF-G stamped on the carburetor base, 1.08" venturi size 287 cfm. Core, rebuildable carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top. PCV spacer plates also available and required for stock air cleaner clearance on top of engine.

Price: $380.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24418 -

1968 390-4V Holley 4150 carburetor, automatic C6 transmission - All 50 states. C8OF-9510-D stamped on the carburetor air horn. Holley list #3796, 600 cfm. Core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube or good choke assembly on our cores.

Price: $468.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24417 -

1968 390-4V Holley 4150 carburetor, 3 or 4 speed manual transmission - all 50 states. C8OF-9510-C stamped on the carburetor air horn. Holley list #3795, 600 cfm. Core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube or good choke assembly on our cores.

Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23332 -

List 1850-1 Holley 4 barrel carburetor, you need to do your homework on part numbers. Good condition but might have a couple of missing or broken linkage bits. Date 0058. Supposed to be a 600cfm carburetor. Here is an interesting article about Holley carbs and how to read the date codes.The above referenced article indicates that the List 1850 Holley is a 4160 Series Carburetor, the lesser expensive replacement model of the 4150 4bbl carburetor that came stock on many Cougars and Mustangs. ...

Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27191 -

List 8004 Holley 4 barrel carburetor, you need to do your homework on part numbers. Good condition but might have a couple of missing or broken linkage bits. Date 1481.Here is an interesting article about Holley carbs and how to read the date codes.

Price: $33.85

Buy Details

Availability: Normal Stock Item
Item #: 10482 -

Basic kit for rebuilding your Ford Autolite or Motorcraft 2100 or 2 barrel carburetor. Covers all factory 2 barrel carburetors on any 1967-73 Mercury Cougar and Ford Mustang with Autolite or Motorcraft 2100 carburetors. Excludes later 2150 carburetors.

Price: $33.85

Buy Details

Availability: Normal Stock Item
Item #: 18906 -

Carburetor idle mixture screw caps like originally came on the cars from the factory. Exact reproduction of Ford part number C7AZ-9J500-A. This clip onto the idle mixture screws of any 1967-73 Autolite or Motor Craft carburetor 2100 or 4300. They also will fit the 429 Cobra Jet with Ford numbered Rochester Quadrajet carburetors in 1970-71. Sold as a PAIR.

Price: $49.85

Buy Details

Availability: Normal Stock Item
Item #: 41875 -

Good Quality spacer that measures 1 1/8" tall. Comes with PCV hose clamp and vacuum port cap. This was used on all 289, 302, 351w motors with a 4V carburetor.

Price: $60.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23830 -

Factory cast aluminum four barrel carburetor spacer plate, one inch tall. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. *excludes Boss 302 Eliminator ...

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 11811 -

New 390 2BBL Carburetor spacer gasket for the 1968 X code 390-2V engine. Two needed per installation, one on both sides of the spacer plate.

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 15292 -

New carburetor gasket for 67 - 70 Cougar or Mustang with 390 or 428 cobra jet engines and Ford numbered Holley carburetors. One or two needed per installation (with or without spacer plate) sold individually.

Price: $15.85

Buy Details

Availability: Normal Stock Item
Item #: 41712 -

Concourse Correct Hollow Left Rear Stud for the Carburetor Vacuum port to the C6 transmission modulator hose Replaces Part # 382768-S8

Price: $18.85

Buy Details

Availability: Normal Stock Item
Item #: 41464 -

Reproduction 8 Cylinder 2V Choke Thermostat Shield for the 1967 and 1968 Mercury Cougar and Ford Mustang

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 31594 -

Clips or clamps for attaching the 3/8" hard fuel lines to the body of any 1968-73 Mercury Cougar or Ford Mustang. Clips only, save your attaching body bolts. Sold in packages of 4 clips as shown. Will work on 1967 cars if you change to 3/8 lines. Replaces Ford 354663-S8

Price: $51.85

Buy Details

Availability: Normal Stock Item
Item #: 41051 -

This quality kit contains everything you need to replace the original hardware for fuel and brake lines on your 1968 Cougar or V8 Mustang. It even includes 3 new bolts for the metal protector plate for the fuel line near the left rear wheel. Most of the mounting locations can be seen below: Click on images to enlarge. ...

Price: $55.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31394 -

Used vented fuel, or gas cap as installed on 1967-69 Mercury Cougar and 1970 cars without California emissions. Also fits 1969-70 Shelby Mustang. In 1970 California required a non-vented fuel cap. This version does have a check valve, one way vented. This is probably a service replacement fuel cap. Typically, OEM factory caps only said "VENTED", see our related item for that specific gas cap.We stock these in limited quantities, and will have an intact paper gasket. "ANTI SURGE"...

Price: $75.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13693 -

Used factory installed vented fuel, or gas cap as installed on 1967-69 Mercury Cougar 1970 cars without California emissions. Also fits 1969-70 Shelby Mustang. In 1970 California required a non-vented fuel cap.We stock these in limited quantities, and will have an intact paper gasket. Correct "VENTED" embossed and has the "S" stamped onto the center rivet. Price is established by demand, and these normally are only needed for very high level restorations or strict concours judging...

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 11802 -

This filter fits all V8 Mercury Cougars or Ford Mustangs with the Autolite Carburetor. This filter fits all 1967 - 1973 Cougars except for the following: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many 6 cyl Mustang applications. Replaces Ford Part #: C5AZ-9155-B or C5UZ-9155-A.

Price: $11.85

Buy Details

Availability: Normal Stock Item
Item #: 41436 -

This filter ONLY fits the following 1967 - 1973 Cougars: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many Mustang applications. Replaces Ford Part #: C7OZ-9155-A, Filter FG-19.

Price: $11.85

Buy Details

Availability: Normal Stock Item
Item #: 41857 -

Quality U.S.A. made hose with concours repeating GAS markings. Also include OEM mounting hardware. Replaces Ford Part #: C7ZZ-9327-A. Check out our video on replacing the fuel system on a '68 Cougar!

Price: $11.85

Buy Details

Availability: Normal Stock Item
Item #: 41859 -

Quality U.S.A. made hose with concours repeating GAS markings. Also include OEM mounting hardware. Replaces Ford Part #: C5ZZ-9327-A.

Price: $29.85

Buy Details

Availability: Out of Stock
Item #: 31551 -

This is the steel tube that goes from the carburetor to the fuel pump. Designed to fit OEM Carter X fuel pump with screws holding two halves together. Modern Carter fuel pumps are crimped and will need some bending of this tube to fit. Please see item 11761 tube for use with generic Carter fuel pumps.

Price: $17.85

Buy Details

Availability: Normal Stock Item
Item #: 14961 -

This is the OE steel tube that goes from the Ford Holley carburetor to the Carter X fuel pump. This was copied to fit the vintage Ford Holley 4150 carburetors as originally found on 1968 390-4V, and 1968-70 428CJ engines. *Note - Designed to fit OEM Carter X fuel pump with screws holding two halves together. Modern Carter fuel pumps are crimped and will need some bending of this tube to fit. Please see item 11761 tube for use with generic Carter fuel pumps. **Note - Excludes 1969 390-4V with...

Price: $29.85

Buy Details

Availability: Normal Stock Item
Item #: 15262 -

This is the stainless steel tube that goes from the carburetor to the fuel pump. Designed to fit OEM Carter X fuel pump with screws holding two halves together. Modern Carter fuel pumps are crimped and will need some bending of this tube to fit. Please see item 11761 tube for use with generic Carter fuel pumps.

Price: $23.85

Buy Details

Availability: Normal Stock Item
Item #: 19902 -

This is the steel tube that goes from the carburetor to the fuel pump on the 289 or 302 with the AutoLite 4300 4 barrel carberator. Original steel version.

Price: $29.85

Buy Details

Availability: Normal Stock Item
Item #: 14030 -

This is the steel tube that goes from the carburetor to the fuel pump if you have a 289 or 302, and you have the Autolite 4300 4 Barrel Carburetor. Stainless Steel.

Price: $32.85

Buy Details

Availability: Normal Stock Item
Item #: 10695 -

Reproduction stainless steel line that runs from the fuel pump to the carburetor on your 68 Cougar or Mustang X Code equipped with a 390 2V engine.

Price: $208.85

Buy Details

Availability: Normal Stock Item
Item #: 11354 -

Reproduction fuel pump for all 1967-69 Mercury Cougars and Ford Mustangs equipped with either the 427 or 428 engine. Updated design from the originals, fuel lines fit the same.

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 10625 -

Reproduction gasket for the vintage two piece Carter fuel pump bowl for the Mercury Cougar or Ford Mustang equipped with either the 390-4V, 427-4V or 428CJ engine.

MSRP:$45.00
Price: $35.85

Buy Details

Availability: Normal Stock Item
Item #: 11268 -

This is the single prong version fuel sending unit for 67 - 68 Cougars and Mustangs. Cougars equipped with the convenience control package, and the XR7's used a three prong version. The function however is not as good as original but adequate and usually will work for years. If you have an original, often times it's just the float that needs replacing, so don't be quick to discard your original. *Note - This reproduction sending unit is technically a copy of the 1968 version. Be aware that the...

Price: $45.85

Buy Details

Availability: Normal Stock Item
Item #: 10117 -

This is the stainless steel, single prong version fuel sending unit for 67 - 68 Cougars and Mustangs. Cougars equipped with the convenience control package, and the XR7's used a three prong version. These units are better than original being made from stainless. The function however is not as good as original but adequate and usually will work for years. If you have an original, often times it's just the float that needs replacing, so don't be quick to discard your original. *Note - This...

Price: $48.85

Buy Details

Availability: Standard Dropship
Item #: 31210 -

This is a single plug (standard models without low fuel warning light) fuel sending unit with an extra bung for a return line for 1967-68 Cougars and Mustangs running fuel injection. No need to change the whole tank in order to upgrade your cat to fuel injection! 

Price: $128.85

Buy Details

Availability: Standard Dropship
Item #: 11265 -

New manufactured fuel / gas tank for 1967-68 Mercury Cougar and 1965-68 Ford Mustang, 16 gallon capacity, has drain plug. This is the economy version, which has a slightly different stamping, and is made in Taiwan. Replaces Ford part #C5ZZ-9002. Check out our video on replacing the fuel system on a '68 Cougar! ...

  • < Prev
For your convinence, you can view this page on our old site by the following link:
View Page On Old Site.