All Products

Application would be for only 1971 Cougars with the 429CJ option, either ram air or non-ram air. Original Ford part number is D0GY-9A626-A.  Also used on the Torino / Cyclone / Cobra / Ranchero.  Notice the main difference between this genuine CJ snorkel and the "Economy" truck snorkel we have listed is the mounting flange hole placement and contour. Click on images to enlarge. ...

Application would only be for 1969 Boss 302 Eliminators and Boss2 Mustangs. Ford part number C9ZZ-9A626-C

Original space saver wheel and tire from a 1968-69 Mercury Cougar or Ford Mustang with the elusive 7.35-14 size. These were optional in 1968-69 and pictures show a 1969 date. Never inflated condition. One RARE unit! Just looking for a space saver spare? We have much lower priced space savers with different sized / marked tires, and some with dual valve stems from the 1970's. Please inquire.*NOTE* Does not include inflator bottle and valve caps are usually missing. ...

Nice unused space saver spare tire for a Ford. Vintage Good Year brand tire with size F78-14. BF Goodrich is another common brand of tire installed for use with unique storage location, hold down, and inflation bottle. This one does not appear to have been inflated or used on the road. Still has the nubs on the face of the tire as shown.

According to the Master Parts Catalog (MPC), any Cougar with a 3.91 or 4.11 rear end and a 4 speed manual would have been equipped with this reducer. Boss 302 and 428 Cobra Jet engines were the only cars that could be ordered with those rear end ratios. Check with the Mustang 428 Cobra Jet Registry for actual usage, Not always factory installed in 1968-69. Check it out, they have a lot of content on that site. https://www.428cobrajet.org/id... This is a part that we will probably never...

According to the Master Parts Catalog (MPC), Early (before Jan 31, 1969) Cougar with a 3.91 or 4.30 rear end and a 4 speed manual would have been equipped with this reducer. Boss 302 and 428 Cobra Jet engines were the only cars that could be ordered with those rear end ratios. Check with the Mustang 428 Cobra Jet Registry for actual usage, Not always factory installed in 1968-69. Check it out, they have a lot of content on that site. Also found on 1970 4 speed Mercury Cougar and Ford...

Used original rear spoiler as taken from a 1969 Eliminator. The 69 wing was lighter and much more prone to cracks and sagging as in 1970. This one was taken from a parts car and properly stored indoors since 1991. Impossible to find in this condition. SEE ABOVE PHOTO FOR INSTALLTION MEASUREMENTS AND DIMENSIONS.Ford part number C9WY-6544206-A

Used original rear spoiler as taken from a 1970 Eliminator.Ford part number D0WY 6544210-A Ford casting number C9WY 6544210-A

1971 Complete, solid Mercury Cougar / Mustang tilt column with no missing or cracked parts. Rebuilt with the inclusion of a fixed lower shaft which eliminates the need for the hard to find (and expensive) tilt rag joint. No change to the installation, or function, and will be in stock more often than our full priced 1971 tilt column. Although they may look much alike, each year 1970 - 1973 is unique. Every column we sell has been disassembled and reconditioned by our full time in house tilt...

1972 Complete, solid Mercury Cougar / Mustang tilt column with no missing or cracked parts. Rebuilt with the inclusion of a fixed lower shaft which eliminates the need for the hard to find (and expensive) tilt rag joint. No change to the installation, or function, and will be in stock more often than our full priced 1972 tilt column.Rebuilt with the inclusion of a fixed lower shaft which eliminates the need for the hard to find (and expensive) tilt rag joint. No change to the installation, or...

1973 Complete, solid Mercury Cougar / Mustang tilt column with no missing or cracked parts. Rebuilt with the inclusion of a fixed lower shaft which eliminates the need for the hard to find (and expensive) tilt rag joint. No change to the installation, or function, and will be in stock more often than our full priced 1973 tilt column. Although they may look much alike, each year 1970 - 1973 is unique. Every column we sell has been disassembled and reconditioned by our full time in house tilt...

1970 Mercury Cougar / Ford Mustang columns were a weak design from the factory. We find that all the columns we get have some degree of excessive play, some will not even hold position. The design was improved upon greatly as the years went by and spending a little more on an updated / rebuilt one is well worth the investment. This is a 100% complete column with key and all parts needed to convert from a fixed to a tilt column. You can use your existing plastic plastic color keyed collar and...

1971 Complete, solid Mercury Cougar / Mustang tilt column with no missing or cracked parts. Although they may look much alike, each year 1970 - 1973 is unique. Every column we sell has been disassembled and reconditioned by our full time in house tilt column specialist. If you do not currently have a tilt column do know you will get every part needed to make the conversion.  Often times we are unable to stock 1971-73 tilt columns due to not having tilt rag joints. We now offer a reduced...

Complete, solid tilt column with no missing or cracked parts. Easy to install and is as comfortable of an upgrade as you maybe imagining it to be. Although they may look much alike, each year 1970-73 is unique. In my opinion this upgrade enhances your cars value in direct proportion to its cost and will not cost you points in judged shows as it was a commonly installed dealer option. Often times we are unable to stock 1971-73 tilt columns due to not having tilt rag joints. We now offer a...

1973 Complete, solid Mercury Cougar / Mustang tilt column with no missing or cracked parts. Although they may look much alike, each year 1970 - 1973 is unique. Every column we sell has been disassembled and reconditioned by our full time in house tilt column specialist. If you do not currently have a tilt column do know you will get every part needed to make the conversion.  Often times we are unable to stock 1971-73 tilt columns due to not having tilt rag joints. We now offer a reduced...

This is my favorite Cougar - Mustang - Shelby option of all time! In fact as a rather tall person that is not as slim as I once was, I do not really enjoy daily driving a Pony car that does not have this option. This column does not only manually adjust up and down with the depression of the turn signal wand towards the dash, it also releases and swings up and towards the passenger side of the car each time the ignition is turned off and the door is opened. To start the car you must close the...

Restored wood rimed steering wheel for the 1967 Mercury Cougar. This is a one year only, Cougar only steering wheel that is correct for the XR7 or Standard Cougar. We must have a good core to start with. If yours is literally falling apart, it is a goner... This wheel does not come with the three spoke horn bar or button as pictured. The bolt on items are sold separate and are shown for display purposes only. Please call for available colors. *NOTE* We must receive your usable core before this...

Restored wood rimed steering wheel 1967 Mercury Cougar. This is a one year only, Cougar only steering wheel that is correct for the XR7 or Standard Cougar. We must have a good core to start with. If yours is literally falling apart, it is a goner... This wheel does not come with the three spoke horn bar or button as pictured. The bolt on items are sold separate and are shown for display purposes only. Please call for available colors. *NOTE* This item carries a $325 core charge that you will...

This restored three spoke, rim blow steering wheel was used on all Cougars 1970-73 except the Cougars equipped with standard interior or on rare occasion the 1973 Cougars that came with the rare 2 spoke leather wrapped wheel. The Cougars equipped with standard interior used a two spoke wheel with the horn button located in the center pad. If you choose to send in a core for exchange it will need to be a clean one as we will not restore steering wheels that have huge cracks, severe UV damage or...

This reproduction steering wheel is a replica of the wood rimmed steering wheel originally equipped on 1967 Shelby GT350's and GT500's. It has a beautifully finished real solid wood rim with proper finger indents and a distinctive black band around the back surface just like the originals. The 3 spoke design is brushed stainless steel with 4 chamfered holes per spoke, and unique black rubber finger guards. The main hub is CNC machined aluminum with a satin finish. Each wheel is equipped with...

The following excerpt was taken from the advance summary sheets mailed to dealers in 66 and 67.- "For when your customer feels like putting his foot down! Cougar has got a heart of "GO" - just as it comes from the factory. But there are bound to be buyers who will get under the hood to sharpen Cougar's claws. To satisfy the needs of these high performance buffs, here are a number of performance equipment items designed especially for Cougar by Shelby American, Inc. We suggest you stock a...

New manufactured Tremec T-5z World Class Transmission. Same transmission as installed in Fox Body Mustangs. This is the common transmission for conversions that does not involve extensive modifications to 1967-73 Mercury Cougar or Ford Mustang. Small block Ford V-8 engines only, 289 / 302 / 351W and 351C. Brand new transmission, no core required. 1 year warranty, with recommended synthetic ATF. Flush and fill after first 500 miles, 30,000 miles there after. Bare transmission as shown, no...

Comes with trunk drop offs and complete tail panel. We would be happy to modify the way in which we remove this part to best fit your needs. Figure about $250 for shipping and crating via www.forwardair.com. Please call to order this one.

Comes with trunk drop offs and complete tail panel. We would be happy to modify the way in which we remove this part to best fit your needs. Figure about $250 for shipping and crating via www.forwardair.com. Please call to order this one.

Used early grade "A" under dash wire harnesses. There is an early and late version of this harness. This early version is for Cougars built prior to 1/3/1967, the late version is for Cats built after. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, tested, and ready to install when they...

Used grade "A" under dash wire harness is inspected, tested, and ready to install. These grade "A" harnesses will be rare uncut and unburnt beauty. This unit is for those of you who demand excellent original parts for your Cougar.*NOTE* If you send us your old used under dash harness, you will receive an in store credit of up to $100. Also keep in mind that we buy original under dash harnesses. We are interested in all under dash harnesses, but are primarily interested in the XR7 harness. ...

Used early grade "B" under dash wire harnesses. There are two versions of this harness, and early and a late version. This early version is for Cougars built prior to 1/3/1967, the late version is for Cats built after. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, professionally repaired,...

Used late grade "A" under dash wire harnesses. There are two versions of this harness, and early and a late version. This late version is for Cougars built after to 1/3/1967, the early version is for Cats built prior to. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, professionally repaired,...

Grade B 1969 under dash harness without air conditioning, with white plug. Used grade "B" under dash wire harness that very few 1969 XR7 and Eliminators used, only very late built cars. This harness may have one or two professional repairs. If you have a red printed circuit board, this is the harness you need. If you have a blue printed circuit board, you have the common harness from the early builds. This harness has the air conditioning wiring. Grade B will have several obvious professional...

Good clean used grade "A" under dash wire harness that was inspected, tested, and ready to install. This grade "A" harness will either be uncut or professionally repaired. Our wiring here in the Northwest tends to be among the best anywhere as we do not have high humidity to corrode connections and we do not have severe heat which tends to make wiring brittle in time.*NOTE* If you send us your old used under dash harness, you will receive an in store credit of up to $100. Also keep...

Used grade "A" under dash wire harness that is inspected, tested, and ready to install. This grade "A" harness will be inspected and may have several professionally hidden repairs. The grade "B" harness will function just as well as the grade "A", but it just won't look as good. Often, people get frustrated when removing this harness and cut it at the firewall where it exits to feed the starter solenoid. XR7 and Eliminator share this same under-dash loom.*NOTE* If you send us your old used...

This is a used grade "A" under dash wire harness that a majority of 1969 model year XR7s and Eliminators used. If you have a blue printed circuit board, this is the harness you need. If you have a red printed circuit board with a white plug, you have a late built car and need to look at our other listing. This grade "A" harness is for those of you who demand perfection throughout your highly restored master pieces. Grade A harnesses are inspected and may have a couple of subtle professionally...

Used grade "A" under dash wire harness that very few 1969 XR7 and Eliminators used, only very late built cars. If you have a red printed circuit board, this is the harness you need. If you have a blue printed circuit board with a black plug you have the common harness from the early builds. This grade "A" harness is for those of you who demand perfection throughout your highly restored master pieces. Carefully inspected and professionally repaired if needed.Cars with A/C will have a different...

1969 XR7 under dash wiring harness, has black plug, and is without air conditioning. This is a used grade "A" under dash wire harness that a majority of 1969 model year XR7s and Eliminators used. If you have a blue printed circuit board, this is the harness you need. If you have a red printed circuit board, you have a late built car and need to look at our other listing. This grade "A" harness is for those of you who demand perfection throughout your highly restored master pieces. Grade A...

1969 Grade A used under dash wiring harness without air conditioning, with white plug. Used grade "A" under dash wire harness that very few 1969 XR7 and Eliminators used, only very late built cars. If you have a red printed circuit board, this is the harness you need. If you have a blue printed circuit board you have the common harness from the early builds. This grade "A" harness is for those of you who demand perfection throughout your highly restored master pieces. Carefully inspected and...

This is a used grade "B" under dash wire harness used on early 69 XR7's without A/C. If you have a blue printed circuit board in your XR7 or Eliminator, this is the unit you will need. The very late production harness had a red printed circuit board that used a white plug. The majority of 1969 XR7's will have this blue printed circuit board. Grade B harnesses are inspected and will have a repairs that will have obvious professionally made repairs.The approximate build date change was...

New old Stock rectangle side valve for the air cleaners on S code 390IP or 390-4V engines, Boss 302 Eliminator, Q code 428CJ engines all non-Ram Air. 1969-70 Mercury Cougar and Ford Mustang. NOS Ford, no Autolite or Motorcraft box. Ford Part Number C8OZ-9D612-C This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our...

This is the cleanest original XR7-G valance we have ever come across. Not only does it have no rust, dents, or filler, but the workmanship is far superior than most! I have seen ridiculous variations in the size and positsions of the cut-outs for the Lucas / Marchal lights over the years. Notice the measurments on the valance, this is for you who are buying our reproduction XR7-G fog light buckets to add to your valance. On this particular valance the variations in location only vary about...

We rarely have this one in stock. Keep in mind that when ordering multiple oversized items from us online that the shopping cart does not know how to best combine items to save you the most money, so we suggest choosing Manually Calculate as your shipping option at checkout so we can manually calculate shipping costs.  If you are ordering this item by itself, the quoted shipping cost should be accurate.Ford part # C9WY-17620-A.

We have a very hard time keeping these NOS rear lower valences in stock. Since the reproductions don't quite fit right, NOS and good used are the best options at this time.Ford part # C7WY-6540544-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store...

Reproduction set of after market cast aluminum valve covers with COBRA 428 lettering. Fits any FE style Ford engine, including 390, and 428 cubic inches.

Here is a pair of cast aluminum running cat valve covers for the 1968 Mercury Cougar XR7-G with the F code 302-2V or J code 302-4V engine. Original valve cover, not a reproduction. Originally cast by Shelby American Inc.Ford part # C8WY-6582-B, Shelby American part number S7WE-6582-B.

Includes all five pieces. Front bow rubber seal is C9ZZ-7653986-A. Side rubber seals are C9ZZ-7651564-A, C9ZZ-7651565-A. Much better fit than reproduction, perfect for that high end restoration.

This set of four wheels is not correct for a xr7G Cougar as they are 15" and the originals were 14". You may find that more tire options are available for a 15" tire. These wheels have been tested and have found to be true. The Rader wheels were recalled by Ford, shortly after the first XR7-G cars were produced. Your Mercury dealer would have installed the common 1968 Cougar style steel wheels as replacements.

Original Rader Wheels as installed on 1968 Mercury XR7-G special edition cars. These are the wheels that were intended and the ones shown in the brochure, posters, and magazine publications. These are the cast and chromed lace designed wheels made by Rader. Set of 5 used 14 x 6 wheels, 4 are in nice condition, the 5th has some chrome plating issues. Included are the caps and cones, which were copied from an original. We are also offering 20 lug nuts, and 20 newly machined lug...