Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 139
$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 26484 -

This reproduction seal is actually a for a 1971 - 1973 Mustang with Ram Air. This is a suitable replacement for a driver or if you have a good used seal maybe you would like to preserve it by using this in its place. As our comparison pictures below will show this is a decent fit out of the box. To get an excellent fit you can cut the seal at the factory seam and remove 2 1/2" of material and then bond it back together using Permatex Instant Gel. The pictures below show an original seal taken...

$0 Price: $8.95

Buy Details

Availability: In-Stock Item
Item #: 14-0009 -

3M brand weather strip adhesive for installing the various rubber weather stripping found on Mercury Cougars on all years. This is the yellow colored adhesive, the factory used yellow adhesive on the weather stripping and is the 2 ounce size.

$0 Price: $15.56

Buy Details

Availability: In-Stock Item
Item #: 14-0010 -

New 5oz tube of yellow weatherstrip adhesive for installing the rubber weatherstripping found on the Mercury or Ford. This 3M brand adhesive is a great match to the yellow colored adhesive that Ford used to attach the weatherstripping on many of it's vehicles back in the day.

$0 Price: $2.55

Buy Details

Availability: In-Stock Item
Item #: 26674 -

These keep the trunk hinge spring rods from rattling. These are a reproduction of the anti-rattler for 67-68 Cougar / 65-68 Mustang.   Replaces Ford part # C5ZZ-6545028. These also work for the 69-70 Cougar / Mustang better than what came factory, which, according to the Ford MPC, for 69-70 would have actually been 1/8" x 7/8" Vinyl Foam Weatherstrip Tape, Ford part C6AZ-19627-A. Check out our trunk torsion bar installation video: ...

$0 Price: $1.45

Buy Details

Availability: In-Stock Item
Item #: 41430 -

Reproduction anti-squeak pad for the leaf springs found on the Mercury Cougar or Ford Mustang. This little unit goes between each individual leaf spring and prevents metal to metal contact. These are sold individually and eight are required per car. Our reproduction leaf springs come with this pad pre-installed. Replaces Ford part # C0AA-5586.

$0 Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23561 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

$0 Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23559 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough to do both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

$0 Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23562 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

$0 Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23560 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27548 -

New rubber body plug, fits 1-3/4 inch normal gauge sheet metal panel holes. These are found on various places throughout classic Ford and Mercury vehicles. Typical application is rear leaf spring access.Sold individually, also sold in kit or assortments for Cougar and Mustangs.Replaces Ford plugs marked 377356.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27544 -

New rubber body plug, fits 1-1/4 inch normal gauge sheet metal panel holes. These are found on various places throughout classic Ford and Mercury vehicles. Some of the holes include: inner frame rails at radiator, center of firewall, and side of cowl.Sold individually, also sold in kit or assortments for Cougar and Mustangs.Replaces Ford plugs marked 377936.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27546 -

New rubber body plug, fits 3/4 inch normal gauge sheet metal panel holes. These are found on various places throughout classic Ford and Mercury vehicles. Some locations include: frame rails at sway bar, rear floor pan, LH fender apron.Sold individually, also sold in kit or assortments for Cougar and Mustangs.Replaces Ford plugs marked 377977.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27543 -

New rubber body plug, fits 9/16 inch normal gauge sheet metal panel holes. These are found on various places throughout classic Ford and Mercury vehicles, typically they are for: front fender aprons, transmission cross member, and radiator support. Sold individually, also sold in kit or assortments for Cougar and Mustangs.Replaces Ford plugs marked 376966.

$0 Price: $1.05

Buy Details

Availability: In-Stock Item
Item #: 27549 -

New rubber body plug, fits oval rear shock access hole. 1-3/4" x 3-5/16" oval holes. Sold individually, Usually 2 per car. Fits 1967-70 Mercury Cougar and Ford Mustang.Replaces Ford plugs marked 378923-S.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27550 -

Reproduction rubber body plug for the Mercury Cougar and Ford Mustang. This 11/16" x 15/16" oval unit fits to the top of the cowl underneath the front fenders. These little units are sold individually, and their are usually two required per car. Replaces Ford plug marked 383181-S.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27545 -

New rubber body plug, fits 13/16 inch normal gauge sheet metal panel holes. These are found on various places throughout classic Ford and Mercury vehicles. Some locations include: trunk floor pan, side of cowl at door, and LH apron.Sold individually, also sold in kit or assortments for Cougar and Mustangs.Replaces Ford plugs marked 377949.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27547 -

New rubber body plug, oval , fits inner frame rails. 3/4" x 1" oval holes. Sold individually, Usually 2 per car. Fits 1967-73 Mercury Cougar and Ford Mustang.Replaces Ford plugs marked 378770-S.

$0 Price: $6.85

Buy Details

Availability: In-Stock Item
Item #: 20087 -

New rubber boot for brake push rod to the master cylinder on all drum brake cars. Fits all 1967-72 Mercury Cougar and 1965-73 Ford anything cars, including Mustang.Trivia - Did you know that 100% of all 1973 Mercury Cougars, came from the factory with front power disc brakes?

$0 Price: $4.15

Buy Details

Availability: In-Stock Item
Item #: 19047 -

Reproduction brake pedal pad for the Mercury Cougar and Ford Mustang equipped with a manual transmission and drum brakes. This unit is a good fit and is a quality part. Replaces Ford part # C5ZZ-2457-G.

$0 Price: $4.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33715 -

This listings is for the rubber bump stop used on the headlight housings of the 69 - 70 Cougar. The purpose of this bumper is to stop the eyelids from hitting bare metal when they open up. As the years go by, these bump stops will become heavily indented and may need replacing. There are a few reproductions out there that are "close enough" but so far we haven't found a good match. 1970 has two per side, four per car.  1969 has one per side, two per car. See reference photos above. ...

$0 Price: $3.25

Buy Details

Availability: In-Stock Item
Item #: 26570 -

Pair of anti rattle spacers / guards that go between the fender and the cowl on each side. The majority of 1969 Cougars and Mustangs used a black foam block glued to the cowl but in late 1969 and all of 1970 these wedge shaped rubber parts were used. Replaces Ford part number C9ZZ-16758-A.

$0 Price: $2.35

Buy Details

Availability: In-Stock Item
Item #: 26566 -

Reproduction cowl cover to hood rubber bumpers for the Mercury Cougar or Ford Mustang. These little units attach to the front of the cowl cover for the back corners of the hood to sit on. These will also work for the 1967-68 Mercury Cougar or Ford Mustang fuel filler door bumpers if you are missing them. Sold as a pair and comes with the attaching screws. *NOTE* These are not an exact replacement, rather a part from another year and application that has been found to be an adequate...

$0 Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 31361 -

This is the rubber that goes into the bracket of the bottom of the center of the door, for 1969 or early 1970 Mercury Cougar and Ford Mustang with glue-in door glass. This bumper will not work if your door glass is the 1970 bolt-in glass. We also sell the version for the 67-68 and late 1970 bolt in glass.Ford part # C9ZZ-6521762-A. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for...

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0226 -

This is the rubber that goes into the bracket of the bottom of the center of the door, for 1969-1970 Mercury Cougar and Ford Mustang glued-in door glass.  Note that this bumper is substantially shorter than the 70  bolt-in door glass version.   See D0ZZ-6521762-A for the 1970 bolt-in door glass version.  If you are swapping out a door on a 69 or a 70 don't forget that the door glass is different between the years and, if you have to swap out the glass, you will...

$0 Price: $0.95

Buy Details

Availability: In-Stock Item
Item #: 27531 -

Exact fit for the front license plate brackets, will also fit the rears, but not concours.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26646 -

Rubber bumper used on 69-70 taillight housings to cushion the closing of the fuel door, sold individually, two required per car. Replaces Ford Part #: 16758.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26620 -

Sold individually, four per car, mounts to fenders. Replaces Ford part #: C6OZ-16758.

$0 Price: $1.75

Buy Details

Availability: In-Stock Item
Item #: 32577 -

Partially dipped clip for attaching the fuel line harness or trunk wiring harness, or fuel line at fuel tank. Found in various places on 1967-70 Mercury Cougar and Ford Mustang.

$0 Price: $1.75

Buy Details

Availability: In-Stock Item
Item #: 31704 -

Partially dipped clip for attaching the seal on top of the radiator core supports. Often times with air conditioning the seals were installed. The factory sometimes used staples, sometimes clips. You would have to investigate your core support for staple holes. 5 clips are typical for attaching the seal. Spread them apart to where it looks equal. Applications: 1967 - 1969 Cougars and Mustangs equipped with the 390 engine, and 1970 Cougars and Mustangs with the 428CJ engine. ...

$0 Price: $0.95

Buy Details

Availability: Out of Stock
Item #: 26139 -

The picture above shows these bumpers installed in the 100% correct reproduction console that we sell. These are sold individually, 2 required per car. Replaces Ford part # 379919.

MSRP:$15.00
$15.00 Price: $10.05

Buy Details

Availability: In-Stock Item
Item #: 41795 -

This A/C evaporator drain hose is molded flex hose similar to the original, but it will need to be cut to the proper length. It is correct for 67 - 68 but can be made to work on 69 - 73. Replaces Ford part #: C7ZZ-19858-C or C8TZ-19858-A.

$0 Price: $99.85

Buy Details

Availability: Out of Stock
Item #: 32793 -

New old stock manual transmission shift lever boot. Attaches to the bell housing on FE big block cars. 1967-70 Mercury Cougar and Ford Mustang, 1966-71 Ford Fairlane / Torino. No comparison to the repro, this is much better.  Replaces Ford Part #: C6OZ-7513-A.

$0 Price: $10.05

Buy Details

Availability: In-Stock Item
Item #: 41483 -

This reproduction is made from the original Ford tooling and is new to the market. Well worth the few extra dollars over the previous ones offered. Replaces Ford Part #: C6OZ-7513-A.

$0 Price: $4.15

Buy Details

Availability: In-Stock Item
Item #: 11299 -

Reproduction rubber dust seal or boot for front suspension upper and lower tie rod ends. 1967-69 Mercury Cougar, Ford Mustang, and many other Ford cars. *Note - This fits the early tie rod ends. If you have changed to later model disc brake spindles or the Granada conversion, we don't have an option for that.*Note - Excludes 1969 Boss 302 cars and some 1969 Shelby GT500 Mustangs.Replaces Ford part #C6OA-3332-A or C6OZ-3332 ...

$0 Price: $14.27

Buy Details

Availability: In-Stock Item
Item #: 26560 -

Correct for your 1967-68 Cougar or Mustang with A/C, but will work just fine in all 1969-73 Cougars and Mustangs with A/C. These pieces are also an excellent option for 1969-73 Cougars and Mustangs without A/C because it will give your heater core a better tighter fit inside the heater box. If you choose to go this route on your 69-73 non A/C car, slight modification to the ends caps will be required to fit. Your just going to cut a hole in one of the end caps. Easy cheesy, no sweat.These are...

  • < Prev