Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14361 -
NEW DESIGN... The consistency of rubber on these strips is soft and supple now. The doors do not have to be "slammed" Of the three reproductions versions out, there these are the best. If you have any NOS to sell we would like to hear about them.Replaces Ford part #: C9ZZ-7602626
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14366 -
NEW DESIGN... The consistency of rubber on these strips is soft and supple now. The doors do not have to be "slammed" Of the three reproductions versions out there, these are the best. If you have any NOS to sell we would like to hear about them. Replaces Ford part #: C9ZZ-7602627
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26644 -
This Wiper Pivot To Cowl Seal Reproduction is sold as a pair. Fits both the 67 and 68. Replaces Ford part #: C5ZZ-17475.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 30664 -
Nice pliable original seal that measures 3 5/8" tall, no burns, rips or cuts. Will trade straight across for 68-70 428 Cougar ram air seal which is only 2 1/4" in height. Ram Airs seals are designed to stretch over air cleaner bases that are approximately 14 3/8" wide at their outer most upper lip.
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 27549 -
New rubber body plug, fits oval rear shock access hole. 1-3/4" x 3-5/16" oval holes. Sold individually, Usually 2 per car. Fits 1967-70 Mercury Cougar and Ford Mustang.Replaces Ford plugs marked 378923-S.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 11-0225 -
This is the rubber that goes into the bracket of the bottom of the center of the door, for 1970 bolt-in door glass. Note that this bumper is substantially taller than the 69 version. See C9ZZ-6521762-A for the 1969 glued-in door glass version. If you are swapping out a door on a 69 or a 70 don't forget that the door glass is different between the years and, if you have to swap out the glass, you will need to make sure you have the correct version of this part for the type of glass...
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26662 -
If these drain plugs are absent mice will be able to find their way into your car. Sold as a pair. Replaces Ford part #: C7ZZ-6511202-A.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 11754 -
This is the correct, original gasket for your 1971-73 Mercury Cougar antenna. Not only is it much thicker than the Ford Mustang gasket, but it also has a different overall geometry to it. Gasket mounts under the antenna base, The Mustang gasket will work, but your antenna will always be slightly askew. Unfortunately the high quality reproduction antenna we offer is only available from the manufacturer with a reproduction Ford Mustang gasket. Please remember not to discard your original Cougar...
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26576 -
Reproduction 3/8" fuel line to side apron grommet for the Mercury Cougar or Ford Mustang.Replaces Ford part # C7ZZ-9288.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 31987 -
Used firewall grommet for the under dash harness. This grommet is actually part of the actual wiring harness, but every once in a while we have bad harnesses that we "part out" for pigtails or items such as this.
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 13627 -
Reproduction gas tank to filler pipe hose fits the 67 to 70 Mercury Cougar, measures 4 1/2" long. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A.
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 14172 -
This is identical to the 67 pad just slightly wider. 1968 was the introduction of many Federally mandated safety upgrades, the larger pedal being one of them. Replaces Ford part number D3ZZ-2454-A
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26657 -
These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up. Plug size: 1 1/2" also used for the electric headlight conversion kit for the firewall pass through body plug.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 42189 -
These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up.Plug Size 1 1/2"
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 27542 -
Set of 4 seat mounting access floor pan plugs, enough for one seat. 2 kits needed for both bucket seats. This is a good idea to pick up two sets of these when replacing carpeting. These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up. Plug Size 1 1/2"
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 11064 -
Original used plastic upper radiator seal for 1971-73 Mercury Cougar and Ford Mustang with 26 inch radiators. Also called a radiator air deflector. Also fits 1970-71 Torino, Ranchero, Cyclone and Montego. As well as 1970-72 full sized Ford and Mercury cars. Comes with 4 original spring clips for mounting. Clips are not sold separately. Plastic portion is about 24 inches long. Replaces Ford part number D0OB-8B170-B.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 26227 -
Good fit, includes all hardware shown. We've found that when using our reproduction drop down bracket (for those with headers), the bushings in this kit will rip and tear through the oversized hole, so you can also purchase the pair of the premium polyurethane bushings and the issue will go away. Otherwise you can go with our premium version boot kit of you need internal parts for the cylinder. Replaces Ford Part #: C6OZ-3C651-A ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 13074 -
NOS lower inside door seal for any 1967-68 Mercury Cougar or Ford Mustang. No wrapper, this is not a reproduced item. Not very many Cougars or Mustangs came with this seal, we think it may have been for wind noise? Unknown. These are pre-drilled for mounting, no hardware included.Replaces Ford part number C7WY-6520272-A.
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26590 -
Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces Ford Part # : C7ZZ-6521449-O Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 31729 -
It is not often we get perfect used but nothing fits like OEM!The Engineering number on the bottom of the passenger side reads C7ZB-6521448-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26599 -
Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces Ford Part # : C7ZZ-6521448-O Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 23422 -
Excellent reproduction seals for your 67 - 68 Cougar or Mustang vent windows. Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces For part numbers:C7ZZ-6521449-AC7ZZ-6521448-A
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26616 -
These are a higher quality rubber than the other reproduction available. Mounts to the door jamb and keeps water from going into the quarter panel. Sold as a pair. Replaces Ford part #: C7ZZ-6528182 and C7ZZ-6528183
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 41542 -
Metal core base as original, correct texture. If you have a 1970 with a Hurst four speed then the one with the rectangular hole is correct for the Hurst shifter. Replaces Ford part # C9ZZ-7277-A. Check out our video on rebuilding your shifter below: ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25815 -
NOS weatherstrip for the driver side (left hand) quarter window in the Mercury Cougar or Ford Mustang. Ford part # C9ZZ-65214A15-A. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 19414 -
Includes all five pieces. Front bow rubber seal is C9ZZ-7653986-A. Side rubber seals are C9ZZ-7651564-A, C9ZZ-7651565-A. Much better fit than reproduction, perfect for that high end restoration.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 12844 -
Much better fit than the reproductions which make closing your door very difficult for the first year.Ford part # C9ZZ-7602627-A
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 12845 -
Much better fit than our reproductions which make closing your door very difficult for the first year. Ford part # C9ZZ-7602626-A