Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 30158 -
Reproduction foam rubber donuts that help cushion the brace from the tail panel on any 67 - 73 Cougar or Mustang.Replaces Ford part number C5ZZ-6540996Sold as a set of 4.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26598 -
This kit includes 33 pieces and has the quarter panel drain valves.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26236 -
This kit includes 38 pieces that include quarter panel drain valves.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 19950 -
This kit includes all the rubber plugs needed for the inner cowl panel as well as two windshield stops. These plugs will help ensure your Cougar's cowl panel doesn't get damaged due to moisture or small pieces of road debris. Each of the eight (8) plugs are constructed from high-quality rubber and are designed to be OEM-style
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41544 -
Reproduction plastic upper radiator seal for 1971-73 Mercury Cougar and Ford Mustang. Also called a radiator air deflector. There are 2 versions of this deflector for different depth radiators. This is the larger version (smaller version is not reproduced) and can be cut down to work on cars with narrower radiators. Some cars used clips to hold these on, but most used staples. Also fits 1970-71 Torino, Ranchero, Cyclone and Montego. As well as 1970-72 full sized Ford and...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 30117 -
Reproduction black extruded plastic shield, or rain gutter for the voltage regulator on any 1969-70 Mercury Cougar or Ford Mustang. Replaces Ford part number C9ZZ-10A506-A.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 18902 -
Used black extruded plastic shield, or rain gutter for the voltage regulator on any 1969-70 Mercury Cougar or Ford Mustang. Ford part number C9ZZ-10A506-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32324 -
Quality complete rebuild kit, includes all hardware shown. Premium flexible rubber boot that has vent holes, boot for elbow, and all hardware designated by an experienced rebuilder for completeness. This is the best known kit on the market.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 31020 -
This is the seal at the back of the booster on the Midland-Ross units.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41005 -
These vinyl coated clips hold the weatherstrip and guide the window when rolling up. Used clips usually are rusted and the vinyl portion is peeling. Two required per car.Replaces Ford part # D1ZZ-6522244. Sold individually
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11050 -
This is the type of material that was used to install gasketless windshields starting in 1969. Tom
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 12334 -
This economy version is made from a softer composition than original and does not hold up very well on a Cougar due to the force that the actuator exerts. Sold as a Pair. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26647 -
These were installed only on early production 1967 Cougars but can be installed on any 1967 Cougar. Later in the year they quit installing these and just used a rubber plug to fill the hole. 1968 was not drilled for these. Sold as a pair.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 31893 -
New hex head screw for attaching the fuel filler neck to the rear body. 67 to 70 Mercury Cougar and 1965-70 Ford Mustang. 1965-68 filler necks require 4 of this style screws. 1969-70 filler necks require a total of 5 hex head screws. #10 x 3/8". Replaces Ford number 42120-S8.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26678 -
Used to seal the Aluminum shifter housing to the transmission tunnel. Replaces Ford part #: C9ZZ-7370. Check out our video on rebuilding your shifter below: ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11393 -
Reproduction door to window seal for the early 1967 Mercury Cougar and Ford Mustang. These are copies of ones for use before 12/14/1966. Install at the rear of the door at the edge of the door window. Replaces Ford part #: C7ZZ-6520558-B and C7ZZ-6520559-A. Sold as a pair. This part is often listed incorrectly under C7ZZ-6520588.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26572 -
Reproduction Clutch Pedal Rod To Firewall Seal. Replaces Ford Part #: C6OZ-7533.*NOTE* From personal experience we have found these do not stay attached to the firewall as well as the originals. An adhesive will remedy this problem.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26521 -
Fits along the lip of the cowl cover and seals to the underside of the hood. Replaces Ford Part #C9ZZ-16740.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26679 -
These seals the round coffee can sized sized cowl vent to the cowl on the driver side.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26660 -
Mounts inside the trunk of both coupes and convertibles. Replaces Ford part # D1ZZ-9008.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26682 -
Replaces Ford part # D1ZZ-9072. Special gas proof rubber seal that mounts in gas tank and filler pipe. Warning! If reproduction tank or filler pipe is not the same dimensions as originals the seal may leak, make sure and check for a good seal before putting into use.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26532 -
Comes with attaching staples made of stainless steel. Applications: 1967 - 1969 Cougars and Mustangs equipped with the 390 engine, and 1970 Cougars and Mustangs with the 428CJ engine. Replaces Ford part #: C4DZ-16238.Not all cars were assembled with this seal, some came with staples, and others used clips.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14248 -
We suggest using white lithium grease or petroleum jelly to ensure the seal will not stick to the shift lever. Fits 1969-73 Mercury Cougar and Ford Mustang, additionally it also fits 1971+ Maverick and Comet with floor shift automatic only. If you have any side-to-side play in the shifter, this seal will not last. We do have the shifter bushings available. Replaces Ford part numbers C9ZZ-7D351-A & D1ZZ-7D351-A. Get the matching mounting clips here. Check...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26681 -
Replaces Ford part #: C5ZZ-7370. Check out our video on rebuilding your shifter below:
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31728 -
It is not often we get perfect used rubber, but nothing fits like OEM!The Engineering number on the bottom of the driver side reads C7ZB-6521449-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration
Wanted!
Buy
Details
Availability: Discontinued
Item #: 26482 -
Passenger side only. Less than perfect fit, no returns on this item.Replaces Ford Part # C7ZZ-6521448-A Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26524 -
Seals between chrome vent frames and door on exterior side. Stops water from leaking between vent window and door. Keep in mind that this seal comes as one strip and it meant to be cut down the middle.Sold as a pair.Replaces Ford part #: C6OZ-6322280 or C6OZ-63222A80-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26601 -
These high quality vent window seals are the first on the market to replace the original Ford part exactly. This is the small seal at the front of the door and next to the door weatherstrip. Sold as a pair. Replaces Ford Part #:C7ZZ-6522332/3
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26527 -
Will fit the 69 coupe or convertible as well, but correct for the 70. Replaces Ford part # D0ZZ-6528182 Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! 1969 Glue-In Glass: The Comprehensive Repair Guide Video
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26631 -
Sold as a pair, correct for coupe or convertible. Will fit the 70 coupe or convertible as well, but correct for the 1969. Replaces Ford part # C9ZZ-6528182 & 3B. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! 1969 Glue-In Glass: The Comprehensive Repair Guide Video ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26223 -
Reproduction taillight housing to body seal kit for the Mercury Cougar or Shelby Mustang. Sold as a kit for two lights. Replaces Ford part # C7WY-13520.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26225 -
This kit is for both sides and its function is to seal the taillight housings to the tail light panel. The oval gaskets make a seal around the openings for the individual tail light socket openings and the long strips go around the perimeter. The detail on this kit is poor, if your originals are in good shape we suggest reusing them and not purchasing these.Replaces Ford part # C9WY-13520-K. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26673 -
These are good reproductions of the originals for your American Sunroof Corporation Golde Sun Roof. The roof opening seal is 89 1/4" x 3/4" and the seal that affixes to the rear edge of the roof panel measures 42 1/2" x 3/4". These have the correct aluminum inner core with rubber bead, wrapped in the correct felt textured, black material. They're are made by the original manufacturer in Germany and will fit all Cougars equipped with the ASC sunroof. Very hard to find seals at a reasonable...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26632 -
Reproduction door to window seal for all 1967-68 Mercury Cougar and Ford Mustang. Technically though
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26523 -
New and improved reproduction bottom of the door seal for the 1967 - 1970 Mercury Cougar or Ford Mustang. Unlike previous versions, these are now made with denser material and are much more rigid. They measure 38" for 1967 -1968 and 41" for 1969-70 so you will have to trim them down if you have a 1967-68. One of the most common missing parts on a 1967-70 Mustang or Cougar today is the lower weatherstrip seals on the doors. These seals were added to cars to keep dirt and moisture from entering...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26586 -
Reproduction door glass seals for the front of the door to the window glass for the Mercury Cougar or Ford Mustang. Replaces Ford part # C9ZZ-6520264. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! 1969 Glue-In Glass: The Comprehensive Repair Guide Video
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 10907 -
Premium reproduction rubber seal with the proper thickness of the 1967-68 seal as found on Mercury Cougar and Ford Mustang except these are not molded to the extension contours. Starting in 1969 this channel seal was manufactured slightly smaller which tightened up the gap on the fender and quarter extension seals. This seal maintains the slightly larger gaps. Sold as a pair, two pairs needed per car. Each package has 2 strips of 25 1/2" lengths. *NOTE* Do not over tighten the...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26661 -
Sold as a PairReplaces Ford Part #: D1ZZ-6520264-A and D1ZZ-6520265-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26637 -
Parking Light Lens Seals are sold as a pair. Fits the 67 and 68. Replaces Ford part #: C5ZZ-13211.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26658 -
These feature all the original details. Quality rubber molded around a steel insert.Replaces Ford Part #: D1ZZ-6528182-B and D1ZZ-6528183-B.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 19966 -
These form a seal between your rear marker lights and the quarter panels. Replaces part # D1ZZ-15447. Sold as a pair.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25991 -
Complete Heater Seals And Foam Kit. Replaces Ford part #C5ZZ-18500.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25968 -
Correct heater box seal kit for 1969 and 1970 Cougars and Mustangs. Replaces Ford part #: C9ZZ-18500-B. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25971 -
This kit is designed for the 1969-1970 heater A/C box. Replaces Ford Part #: C9ZZ-18500-A. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 10517 -
This kit is designed for the Mercury Cougar and Ford Mustang A/C box.Replaces part # D1ZZ-18500-A.Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25972 -
Complete foam seal kit for the heater box, flappers, evaporator and heater core on a '67-'68 Cougar or Mustang with factory Air Conditioning. This kit is almost always needed when replacing your heater core.Replaces Ford part #: C7ZZ-18500-A. Check out our video below on how to replace a heater core on a '68 Cougar with A/C! This seal kit is an integral part of the process. ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 19947 -
This 4 Speed Lower Shift Boot attaches to the bottom side of your shifter to protect it from water and dirt. Fits the 67 and the 68 with 289 or 302 engines only Replaces Ford part #: C6ZZ-7138-C.