Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1009-1056 of 3425
$0 Price: $72.75

Buy Details

Availability: In-Stock Item
Item #: 19920 -

This is a good reproduction made from the original Ford tooling and features the original Ford logo. This is for the 24" radiator used in both the 351 Windsor and 351 Cleveland in 1970 only. Made of a different material than original and is 1.76 pounds VS. 2.56 pounds on the NOS shroud. *NOTE* This has the BARNUM BROS. FIBRE CO. INC. scratched off (but still faintly visible) just like our NOS shroud. Replaces Ford part # D0ZZ-8146-A. For some helpful tips on upgrading your Cougar (or Mustang)...

$0 Price: $428.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32211 -

This USED shroud was discontinued by Ford in the mid 1990's. It really is no different in appearance from our reproduction, but it does weigh a hefty 2.56 pounds and the reproduction weighs 1.76 pounds. Must have FoMoCo / part numbered shroud for that show quality BOSS 302 or 351C Eliminator. Just like our reproduction, the BARNUM BROS. lettering has been ground off. This was done because Barnum no longer made the shrouds for Ford in the latter years, but the tooling still had their name on...

$0 Price: $39.85

Buy Details

Availability: Rare / NOS Part
Item #: 32780 -

Fan spacer, measuring 1-1/2 inches. Application includes 1970 Mercury Cougar and Ford Mustang with 351 engines and standard cooling. Reference number YA-21, cross reference to C8OE-8546-A spacer. This is a service replacement design spacer, which came out about 1970. Fits all the same.Ford Motorcraft part # D0AE-8546-B, Ford engineering # D0AZ-8546-B.

$0 Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24395 -

Fan spacer, measuring 1-1/2 inches. Application includes 1969 Mercury Cougar and Ford Mustang with 351-2V engines and standard cooling. Reference number YA-21, cross reference to D0AE-8546-B spacer.Ford part # C8OE-8546-A, Ford engineering # C5DZ-8546-B.

$0 Price: $76.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24502 -

Fan spacer measuring 1-1/4 inches. Application includes 1969 Mercury Cougar and Ford Mustang with Boss 302 or 428 Super Cobra Jet engines. Additionally it was likely used on 1971 cars with 351-2V engines and standard cooling. Reference number YA-20, cross reference to D1OA-8546-AA spacer.Ford part # C8YE-8546-A, Ford engineering number C8YZ-8546-A.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25285 -

Fan spacer, measuring 1-1/4 inches, but referenced at 1-9/32" too. Application includes 1971 - 1973 Mercury Cougar and Ford Mustang with 351-2V engines and standard cooling. Reference number YA-20, cross reference to C8YE-8546-A spacer.Ford part # D1OA-8546-AA, Ford engineering # C8YZ-8546-A.

$0 Price: $65.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24993 -

Fan spacer, measuring 2-1/4 inches or sometimes mentioned as 2-8/32". Application includes 1970 Mercury Cougar and Ford Mustang with Boss 302 engines, or 351 engines with extra cooling or air conditioning. Reference number YA-31.Ford part # D0AE-8546-A, Ford engineering # D0AZ-8546-A.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24338 -

Fan spacer, measuring 2-7/16 inches, sometimes mentioned as 2.44". Application includes 1971 Mercury Cougar and Ford Mustang with 351 engines and air conditioning. Reference number YA-74.Ford part # C8AE-8546-E, Ford engineering # C4AZ-8546-F.

$0 Price: $26.87

Buy Details

Availability: In-Stock Item
Item #: 10895 -

Reproduction radiator fan spacer for fixed or flex fans. Can be used on 1967-73 Mercury Cougar and 1964-73 Fords and Ford Mustangs. Ideally the various length spacers were used to place the fans half way into the fan shrouds for optimal cooling. Original Ford part number C4AZ-8546-A.

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0289 -

Metal fan wheel or squirrel cage for any 1967-73 Mercury Cougar or Ford Mustang with factory air conditioning only. Dimensions 5-3/4 inches in diameter and 4-1/8 inches tall. Shipped used as they come out of the cars, most will need cleaning and have light pitting. Some variations in the stampings, come 'as balanced' from the factory. Comes with allen set screw.

$0 Price: $18.15

Buy Details

Availability: In-Stock Item
Item #: 26146 -

Reproduction alternator mounting kit for the Mercury Cougar or Ford Mustang equipped with the 390 or 428 engine. Spacer not included, but available.

$0 Price: $22.91

Buy Details

Availability: In-Stock Item
Item #: 13894 -

Bolts, washers, and spacers kit for installing the rear bumper brackets on any 1969-70 Mercury Cougar or Ford Mustang.

$0 Price: $187.55

Buy Details

Availability: In-Stock Item
Item #: 41173 -

AMK engine fastener kit for 1971 Mercury Cougar and Ford Mustang with J or C code 429 Cobra Jet engines. This kit claims to have 136 pieces. This kit additionally fits 1970-71 Ford Torino and Mercury Cyclone and other variants with 429CJ engine.Kit typically includes: fasteners to attach air cleaner, carburetor, crank pulley, distributor / points / condenser / vacuum advance, drain plugs, engine tag, exhaust manifolds, fan / fan clutch, fuel pump, shroud, ignition coil and strap, intake...

$26.00 Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 41287 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$26.00 Price: $45.36

Buy Details

Availability: In-Stock Item
Item #: 41285 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 41078 -

This reproduction hood latch and catch screw and U nut kit fits both the Standard and XR7 and is sold as a kit as pictured.

$0 Price: $9.32

Buy Details

Availability: In-Stock Item
Item #: 41080 -

This reproduction hood latch vertical support screw and U nut kit fits both the Standard and XR7 and is s sold as a kit as pictured.

$0 Price: $5.27

Buy Details

Availability: In-Stock Item
Item #: 13912 -

This is a Mustang kit and it includes 4 screws, 2 metal nuts, 2 self-threading plastic nuts and 2 anti-rattle bumpers as pictured.For Cougar, you need this kit plus 2 more plastic nuts, found here.

$0 Price: $65.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0047 -

Used bolts, and usually new washers. Coupe kit comes with 4 - "A" bolts, 4 "B" bolts, and 2 "D" bolts, 12 new washers. Kit fits all 1970-73 Mercury Cougar and Ford Mustang coupes. Coupes or hard tops will have shoulder belt hardware. We will make sure these original seat belt bolts are damage free and rust free. The gold finish will be degraded.  There were minor and major changes almost every year. We also have hundreds of used belts and belt sets that we cannot possibly list...

$0 Price: $55.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0078 -

Used bolts, and usually new washers. Convertible kit comes with 4 - "A" bolts, 4 "B" bolts, 10 new washers. Kit fits all 1970-73 Mercury Cougar and Ford Mustang convertibles. Coupes or hard tops would include shoulder belt hardware. We will make sure these original seat belt bolts are damage free and rust free. The gold finish will be degraded. There were minor and major changes almost every year. We also have hundreds of used belts and belt sets that we cannot possibly list all of, so give us...

$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31196 -

This is our used driver side (left hand) upper rear fender brace. Welds to the upper cowl on any 1969-70 Mercury Cougar and Ford Mustang Ford part number C9ZZ-16A005-A driver side, C9ZZ-16A006-A passenger side.

$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31197 -

Used passenger side (right hand) upper rear fender brace that brace visible when you open the door and look in the upper part of the fender void. Welds to the cowl on 1969-70 Mercury Cougar and Ford Mustang. Ford part number C9ZZ-16A006-A passenger side, C9ZZ-16A005-A driver side.

$0 Price: $7.18

Buy Details

Availability: In-Stock Item
Item #: 26019 -

Bag of 25 reproduction j-nuts for the front fenders on the Mercury Cougar or Ford Mustang.5/8" from bend to center hole.

$0 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 23765 -

Sold as a pair. These often become dislodged due to the force required to be applied after they have rusted in place for decades. Located at the bottoms of the fenders.

$0 Price: $136.36

Buy Details

Availability: In-Stock Item
Item #: 30889 -

Set of nuts and Ferrules for thermactor smog tubes on any 1967 S code 390, 1968 390GT, 1968 GT-E 427-4V, or 1968-70 428 Cobra Jet engines. Mercury Cougar and Ford Mustang, Torino, Cyclone, Ranchero, etc. These will work with original or reproduction smog tubes. Fits most FE engine applications that used the air pump smog system in 1968 with manual transmission. We also have the smog tubes and other hardware.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25024 -

1970 California evaporative system. Tapered hose. This item is not reproduced and it is getting to be hard to find a good pliable hose with no damage.Filler neck not included.

$0 Price: $125.00

Buy Details

Availability: Rare / NOS Part
Item #: 33419 -

New Old Stock 1970 California evaporative system tapered filler neck hose. Soft and pliable, never installed.Ford part number D0DZ-9047-A

$0 Price: $17.31

Buy Details

Availability: In-Stock Item
Item #: 33181 -

Tall style filter for C4 transmissions.  Fits all Ford C4 transmissions for any 1966-73 Mercury Cougar or Ford Mustang with that W code C-4 transmission. This is designated as the 'tall' filter, introduced in 1965. I guess that Ford installed a deeper pan in 1965? Solid metal construction with filter inside.