All Products

Reproduction factory air conditioning vent register knob. This knob controls the black vent door or valve inside the round registers. These will fit the original axle shafts, but will need to be attached with some super glue or other adhesive. These new knobs fit our reproduction axle shafts that have new splines on them perfectly. Please note the position or orientation of the knob in relation to the position of the internal black plastic butterfly.

part # 370608-S. Used in multiple places on mounting brackets.

This decal was available in both red and purple and both decals have the same Ford part number on them with the purple decal being slightly larger with more defined text. This is the purple version.Decal reads:Ford Dearborn, Mich. Air Conditioner Maximum Operating Charge 4LBS. 8OZ. of R-12 Complies With SAE-J639 Replaces part # D20E-19A688-AB

Available in Red and Purple. Both the red and the purple decals have the same Ford part number on them. The purple is a slightly larger decal, with more defined text. Decal reads: Ford Dearborn, Mich. Air Conditioner Maximum Operating Charge 4LBS. 8OZ. of R-12 Complies With SAE-J639 D20E-19A688-AB

Decal reads: Ford Dearborn, Mich. Air Conditioner Maximum Operating Charge 1LBS. 12OZ. of R-12 Complies With SAE-J639 D1ZA-19A688-AC

This Accelerator Pedal Rod To Firewall Grommet reproduction fits both the 67 and the 68. Replaces Ford part # C6OZ-9793-A.

Reproduction diaphragm pump that mounts on the front all 67 - 73 Cougar or Mustang Autolite 2V carbs as well as 1967 Autolite 4V Carbs. With today's gas, these commonly fail, especially when sitting for extended periods of time. Complete failure will cause fuel leaks, but many times these will affect performance well before a leak actually starts. Good idea to replace every few years or if sitting for 6 months or more. Replaces Ford Part #: C4AZ-9B559-A.

Stainless insert that fits in holes around wheel.Fits the following models with styled steel wheels:1969 Mercury Cougar1970 Mercury CougarThese inserts fit or both the 1969-70 OEM Cougar styled steel wheels and the reproduction 1969-70 styled steel wheels. These are the most up to date version of these bezels. The originals tend to have a more mirrored finish like the stainless steel window trim, these reproductions tend to have a brushed nickel look to them.Sorry, these do not come with...

Molded rubber plug, seals access hole in the side of shift housing. Replaces Ford Part # : C5ZZ-7C147-B Check out our video on rebuilding your shifter below: ...

Floor shifter access plug. 1967-73 Mercury Cougar and Ford Mustang, also fits floor shift 1971+ Mercury Comet and Ford Maverick. Ford Part number C7ZZ-7C147-A. Check out our video on rebuilding your shifter below: ...

There are 3 of these acorn nuts used per emblem. They are taller than what was used in 1968.Sold individually.

Ford called this small door latch part an adjuster. It threads onto the bottom of the door latch rod inside the door. Common to most Ford products 1965-1970. Ford part number C5AZ-62218106-A.

3M brand weather strip adhesive for installing the various rubber weather stripping found on Mercury Cougars on all years. This is the yellow colored adhesive, the factory used yellow adhesive on the weather stripping and is the 2 ounce size.

This fine threaded Phillips screw assembly is the mechanism in which to adjust your headlights up or down, left or right. There are two units per bulb for a total of eight per car. The two new screws that mount them to the grille are included at no extra cost. They will be in perfect working order and not rusty as we only keep the best examples. Two versions for 1967-68, the most common has the square corners and is rectangular, the other supplier had clipped corners as shown in the comparison...

1969-1970 Headlamp adjusting screw. Two per bulb, eight in all per car, comes with two new mounting screws. This part is identified by the clipped corners. Also used during 1967 and 1968 on a limited basis. Will be in good rust free condition as we only keep the best examples.Also sold in a set of 8. ...

This bolt is what adjusts your headlamp cover height. Many people do not know they can rid themselves of that droopy eye look (misaligned grille) by placing new rubber pads on the heads of these bolts and adjusting them. Four required per car, sold individually. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Ford Part # 379390-s Sold individually

This screw / stud seems to always be missing. This screw is just a little longer than stock to accommodate installing the Hi-Po air cleaner. Fits most Autolite carburetors. Size: 4 1/8 inches length 1/4-20 X 5/16-18 threads. Check your thread size on the carburetor, we think that starting in 1969 the Autolite 4300 carburetors had 1/4-20 threads. Please note that this stud has 5/16-18 threads going into the carburetor.  Replaces Ford Part #: 370971-A *Note - Check your carburetor, it will...

Sold individually. Used on factory 2V Ford carburetors. Zinc (dark gray)

Reproduction carburetor stud for all Ford numbered Holley carburetors 1967-71. 1/4-20 double ended stud from AMK. Stud only, no wingnut. 

This is a reproduction of the original orange engine displacement decal with black lettering and black and orange checkerboard on each end that was located on the top of the air cleaner.Fits the following model with a 289 2 barrel engine:1968 Mercury CougarReplaces Ford part# C8DF-9C611-B

This is a reproduction of the original orange engine displacement decal with a black and white checkerboard background on each end. Located on the top of the air cleaner.Fits the following models with a 289 4 barrel engine:1967 Mercury Cougar 1967 Ford Mustang Replaces Ford Part #: C5ZF-9638-D ...

This is a reproduction of the original orange engine displacement decal with a black and orange checkerboard background that was located on the top of the air cleaner.Fits the following models with a 289 4 barrel engine:1967 Mercury Cougar1967 Ford Mustang

This is a reproduction of the white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner.13 11/16" from tip to tip, fits the larger diameter air cleaner available in 1972.Fits the following models with a 351 2 barrel engine: 1972 Cougar 1972 Mustang ...

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner.  11-1/2 inch span, fits the smaller diameter air cleaner available in 1972.Fits the following models with a 351 2 barrel Regular Fuel engine:...

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 2 barrel Regular Fuel engine: 1973 Cougar 1973 Mustang ...

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-4V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 4 barrel engine:1972 Cougar1972 Mustang ...

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-4V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. located on the top of the air cleaner. *Note - Will not fit 1968-72 air cleaner lids that are 18 inches in diameter.Fits the following models with a 351 4 barrel engine : 1973 Cougar1973 Mustang ...

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-4V Regular Fuel followed by white background with blue lettering and a Motorcraft, Autolite parts logo. located on the top of the air cleaner. *Note - Too small to fit the 18 inch diameter air cleaner lid from 1968-72.Fits the following models with a 351 4 barrel engine:1974 Cougar1974 Mustang

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-CJ Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 4 barrel Cobra Jet engine:1972 Cougar1972 Mustang ...

This is a reproduction of the original engine displacement decal. Black on chrome background followed by black background with chrome head and lettering 390-2V located on the top of the air cleaner. Fits the following models with a with a 390 2 barrel engine:1968 Mercury Cougar X code 390 *CUSTOMER REVIEW* Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torque specs for my rocker arms on my Cougar. I wanted to check to make sure...

This is a reproduction of the original chrome engine displacement decal with black lettering and stripes that was located on the top of the air cleaner.Fits a 1967 Mercury Comet GT with a 390 4 barrel engine.This decal is for the 1967 Mercury Comet 390 4V GT Air Cleaner. It can be used on the Cougar but as far as we can tell the 67 390 GT Mercury Cougar did not have an air cleaner decal.

This is a reproduction of the original orange engine displacement decal with black lettering and black and white checkerboard on each end that was located on the top of the air cleaner. This decal is for models without the GT package.Fits the following models with 390 4 BBL engines:67 Mercury Cougar1967 Ford Mustang Replaces Part #: C5AF-9638-D ...

This is a reproduction of the original orange engine displacement decal with black lettering and orange checkerboard on each end that was located on the top of the air cleaner. This decal is for models without the GT package.Fits the following models with the 390 4 barrel engine:1967 Mercury Cougar1967 Ford Mustang

This is a reproduction of the original engine displacement decal with a chrome background with MERCURY in black lettering followed by the Mercury head logo and 390 4V in chrome with a black background. located on the top of the air cleaner.Fits the following models with a 390 4 barrel engine:1967 Mercury Cougar

This is a reproduction of the original orange engine displacement decal with black lettering and black and white checkerboard on each end that was located on the top of the air cleaner.Fits the following models with the 390 4 barrel engine:1968 Cougar1968 Mustang

This is a reproduction of the original orange engine displacement decal with black lettering and black and white checkerboard on each end that was located on the top of the air cleaner.Fits the following models with a 428 4 barrel Cobra Jet engine:1968 Cougar1968 Mustang Replaces Ford Part #: C8AF-9C611-D

This is a reproduction of the original black engine displacement decal with gold lettering and black and chrome checkerboard on each end that was located on the top of the air cleaner. Fits the following models with a 429 CJ Ram Air engine:1971 Cougar

This is a reproduction of the original Autolite parts decal that was located on the air cleaner.Fits the following models:1968 Cougar1968 Mustang

This is a reproduction of the original Autolite parts decal that was located on the air cleaner.Fits the following models with a BOSS 302 or a 428 4 barrel Cobra Jet engine:1969 Cougar1969 Mustang

This is a reproduction of the original Autolite parts decal that was located on the air cleaner.Fits the following models with a BOSS 302 engine:1970 Cougar1970 Mustang

This is a reproduction of the original Autolite parts decal that was located on the air cleaner.Fits the following models:1968 Cougar1968 Mustang

This is a reproduction of the original Autolite spark plug decal that was located on the air cleaner.Fits the following models:1967 Mercury Cougar1967 Ford Mustang ...

This is a reproduction of the original engine displacement decal. Yellow background with black logo followed by black background with white 302 4V followed by yellow background with black BOSS. Located on the top of the air cleaner.Fits the following models with a BOSS 302 engine:1969 Cougar1969 Mustang

This is a reproduction of the original engine displacement decal Black on chrome background followed by black background with chrome Cougar logo and 302-4V High output lettering. Located on the top of the air cleaner.Fits the following models with a BOSS 302 engine:1970 Cougar1970 Mustang

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. For 1972 Mercury Cougar 4V applications click here. Air Filter Height (Inches) : 2.615" Air Filter Height (mm) : 66.42 mm Air Filter Bottom I.D. (Inches) : 9.03" Air Filter Bottom I.D. (mm) : 229.36 mm Air Filter Bottom O.D. (Inches) : 11.25" Air Filter Bottom O.D. (mm) : 285.75 mm Air Filter Top I.D. (Inches) : 9.03" Air Filter Top I.D....

Reproduction stud and nut assembly that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 289 / 302 / 351W / 390 / 428CJ pedestals from 1967 - 1973. Stud is threaded into the cylinder head for easy installation of the cast iron pedestal bracket.*Note - Excludes 351C and 429CJ.

Reproduction air conditioning dryer decal for the 1969 Mercury Cougar or Ford Mustang