All Products

Burl woodgrain applique kit in the Burl wood design for the 1968 XR7-G console switch panel. This 3 piece kit includes narrow strips for the chromed edging on console and the fog light and sunroof switch bezel. Color and grain is very close to the originals. The switch panel housed the sunroof and fog light switches. Technically the switches should be labeled, but this is a plain wood grain applique at this time. We are looking into a silk screen process for the silver labeling. Here’s a...

Reproduction driver side (left hand) rear apron extension for 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Reproduction passenger side (right hand) rear apron extension for the 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Reproduction front armrest in turquoise for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard...

Reproduction front armrest in red for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard...

Reproduction front armrest in black for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard...

Reproduction front armrest in parchment / off-white for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for...

Reproduction front armrest in saddle for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford part # C8ZZ-6524100 and C8ZZ-6524101. *NOTE* The Ivy Gold and Aqua armrests...

Although many vendors would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions on the market at this time. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. Left and right are the same for 1967 standard Cougar's. We also have NOS and used available in most colors. I know it will cost us sales by being blunt about the quality on some of these items, but after using these...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford part # C8ZZ-6524100 and C8ZZ-6524101. *NOTE* The Ivy Gold and Aqua...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford part # C8ZZ-6524100 and C8ZZ-6524101. Color on these is inconsistent...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue, Parchment, Ivy Gold, Aqua, Saddle, or Nugget Gold. Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101. *NOTE* The Ivy Gold and Aqua armrests are not correctly colored...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101. ...

Although many would disagree, these are in my opinion average quality. "BUT" they are the best available reproductions currently available. The inner portion where your fingers go have too sharp of edges and they do not hold up nearly as well as the originals do. We also have used available. Available in Black, Dark Red, Blue (not shown), Parchment, Ivy Gold, Aqua (not shown), Saddle, or Nugget Gold (not shown). Replaces Ford Part #: C8ZZ-6524100 and C8ZZ-6524101 Color on these is inconsistent...

This is the arm rest base for the driver or passenger side on any 1971, 192 or 1973 Mercury Cougar with standard interior as well as some Mustang trim levels.  Also fits multiple other Ford /  Mercury cars of the same vintage.Replaces Ford Part Number: D1AB-5724144

If you have an early 1969 your hinge was a flexible plastic strip that long ago began to fail. Often you will see generic piano hinge in its place. This is a correct reproduction of the hinge used in the latter part of 69 and all of 70 Cougar and Mustang consoles. Replaces Ford part # C9ZZ-6306050.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made. Replaces Ford part # D1ZZ-6524101.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made. Replaces Ford part # D1ZZ-6524100.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made. NOTE: The color on this armrest is incorrect and is a darker shade of brown, rather than the correct ginger color. Replaces Ford part # D1ZZ-6524101.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made. NOTE: The color on this armrest is incorrect and is a darker shade of brown, rather than the correct ginger color. Replaces Ford part # D1ZZ-6524100.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made.

Correct texture and molded-in colors, with steel insert molded into foam to increase strength. Extra thick vinyl skins. American made.

57 pages,used by the workers when they were being built new. Must have if you are putting together your Cougar and a great resource when tearing it down!

45 pages.

73 pages that every classic Cougar owner who works on his own car must have. Will save many hours of frustration.Here's our little film to help you fortify your flexxy feline!

95 pages that every classic Cougar owner who works on his own car must have. Will save many hours of frustration.Here's our little film to help you fortify your flexxy feline!

105 pages that every classic Cougar owner who works on his own car must have. Will save many hours of frustration. Customer Comment: "These guys have got to be the most professional I've dealt with in the 4 years I've been restoring my Mustang and Cougar. I have had nothing but pleasant conversations even though I suffer from C.R.S. ( Can't Remember ***T) and tend to be long winded." Dan D. (mercurycougar.net) Here's our little on chassis and suspension upgrade: ...

91 pages or diagrams, exploded views and part numbers. This assembly manual was used by the factory workers and shows great details on routing your wiring, great for the person who is assembling their car after it has been apart for some time.

101 pages of diagrams, exploded views and part numbers. This assembly manual was used by the factory workers and shows great details on routing your wiring, great for the person who is assembling their car after it has been apart for some time.

This manual shows exploded diagrams and part numbers of all the motors Ford used in 1969, not just the Cougar. I use this manual almost daily for identifying air conditioning brackets and various pulleys.

This manual shows exploded diagrams and part numbers of all the motors Ford used in 1967, not just the Cougar. I use this manual almost daily for identifying air conditioning brackets and various pulleys.

49 pages of exploded factory diagrams and part numbers. This is a reprint of the manual used by the factory workers back in the day. This is a MUST HAVE if your Cougar is in the reassembly stage, great resource for taking your car apart as well.

Used Nuts for attaching the oil reservoir to the pump. Two nuts used for attaching the reservoir to the pump. Nuts fit the high pressure port. This is a pair of nuts. Please follow the assembly procedures for the Ford power steering pump in the Ford shop manuals. Fits all small block V-8 engines, on 1970 Mercury Cougar and Ford Mustang. 1970 428CJ engines used a different pump with smaller diameter line fitting.

This USB flash drive contains the complete Autolite 4300 carb information from overhauling, to diagnosis and repair. A must for anyone planning to work on their own carburetor. This USB contains detailed instructions on disassembly and assembly of all major components. This USB version of this manual is a great option for international customers. Light weight, and all you need is a PC, laptop or tablet (with USB support), and you can plug this drive in and access all the...

Backer board for the sill plate on any 1971-73 Mercury Cougar or Ford Mustang. Also called a shield, it bridges the gap over the channel for the wiring harness. It is adjacent to the sill plate, and keeps the carpet from dropping into the exposed channel. This is a used part, and made from fiber cardboard type of material. See our reproduction item in the related items for a lower cost and made from more sturdy material. Original Ford part number D1ZZ-6513218-A. Two required per car, sold...

Backer boards (PAIR) for the sill plate on any 1971-73 Mercury Cougar or Ford Mustang. Also called a shield, it bridges the gap over the channel for the wiring harness. It is adjacent to the sill plate, and keeps the carpet from dropping into the exposed channel. This is a new part, and made from durable non paper material. See our  related items for used. Original Ford part number D1ZZ-6513218-A. Two required per car, sold as a pair.

Hassle free kit makes it easy to install backup lamps. This kit includes mounting pads, lenses, gaskets, T1142 Bulbs and mounting hardware.

Perfect fit the first time. You will be happy with this Group 24, quality reproduction and check out the price! These battery trays are a popular item for restorers since most of the originals have been destroyed by leaking batteries over the years. Replaces Ford part #: C7ZZ-10732-D.

Exactly like the originals. This group 27 battery trays are a popular item for restorers since most of the originals have been destroyed by leaking batteries over the years. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars. Supplier misidentifies this part as D1ZZ-10732-B. Replaces Ford Part #: D0OZ-10732-B.

For those cold days in the garage, keep your head warm with our 100% acrylic knit 8" beanie. Classic black color with an embroidered WCCC walking cat logo on the front. Also works as a head collision absorber for those who own 1970 Cougars and work under the hood (you know what we mean). Great gift idea for Cougar fans, and for those who prefer beanies over baseball hats.

New front Inner wheel bearing with cup / race for original drum and disc brakes for all 1970-73 Mercury Cougar and 1970-73 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 1.378 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A smaller outer bearing and this inner bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the...

New front outer wheel bearing with cup / race for original drum and disc brakes for all 1970-73 Mercury Cougar and 1970-73 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 0.865 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A large inner bearing and this outer bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the...

Reproduction steering column bearing for the 67-73 Cougar or Mustang. The tilt columns take an upper and lower bearing, while the fixed column only takes an upper. Outside diameter: 1 1/2" Inside diameter: 1 1/4"*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Very nice replica of the cigar / cigarette lighter bezel for the 1970 Mercury Cougar or Ford Mustang. Replaces Ford part # D0ZZ-10852-L.

This replaces that rusty, scratched bezel in your 1969 Cougar or Mustang center console. Included is the support bracket for the backside.