Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Featured!

Spotlight!

Moulding / Trim - Rear Deck / Trunk Lid - Aluminum - w/ Clips - ECONOMY - Repro ~ 1967 - 1968 Mercury Cougar

Economy Reproduction Aluminum Deck Lid Moulding for the 1967 and 1968 Mercury Cougar

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar

Item #: 33054

Price: $81.82

Cost: 6546

Earns: 328

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar

Description

Economy reproduction aluminum rear deck lid moulding / trim for the 1967 - 1968 Mercury Cougar (will also fit on 1969-1970). This reproduction is as close to the original as possible, except for the fact that the clips included have 8mm nuts, unlike the originals.

There is however one small problem, the metal on these mouldings is much softer than the originals and you have to take extra care when installing the clips, if you apply too much pressure when installing, you will dimple the moulding. Rather than use the included clips (which are too thick), we recommend going with our tried and tested reproduction set.

Keep in mind that your clean OEM core (stainless or aluminum) original deck lid moulding can be traded in for store credit at WCCC.

Replaces Ford part # C7WY-6542512-A.

For more insight on this tricky trunk trim, check out our video below:

Check out our video below for more about our trim restoration services and core exchange program.

Specifications:

Shipping Weight: 4.00 LBS

(weight shown may be the dimensional weight)

Returning Cores

When sending us your core(s), we will need a copy of your invoice. Or at the very least, your invoice number which is located at the top left corner of your original invoice. We will also need the date of your purchase.

Once you have your trim cores packed, we suggest that you take them outside and throw them up into the air as high as you can. After your box lands, jump on it. If you do not think that it will survive, you have not packed it well enough. We have discovered that this type of abuse is typical with shipping. We are not responsible for any damages that may occur in shipping.

Acceptable Cores

Do not send us pretzel shaped parts, parts you have attempted to fix yourself, or flattened out parts. We need trim parts showing only MINOR dents, dings, dullness, or scratches.

If you have viewed our video on how to determine if your core is acceptable and still have further questions, please fill out our contact form and we will help you evaluate your trim cores.

0 Reviews ( of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 20181 [More info]
[More info] Clips - Moulding / Trim - Rear Deck / Trunk Lid - Set of 7 - w/ Acorn Nuts - Repro ~ 1967 - 1970 Mercury Cougar
Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This...

Buy

$11.88
Frequently
Purchased With

Item #: 27491 [More info]
[More info] Clip - Moulding / Trim - Quarter Extension - Small - EACH - Repro ~ 1967 - 1968 Mercury Cougar
Reproduction clip for the rear quarter extension moulding / trim on the Mercury Cougar. The rear quarter extension moulding / trim uses 2 different size clips. This is the smaller of the two. One per side, 2 per...

Buy

$0.85
Frequently
Purchased With

Item #: 26221 [More info]
[More info] Weatherstrip Seal - Rear Deck / Trunk Lid - Repro ~ 1967 - 1970 Mercury Cougar / 1965 - 1970 Ford Mustang
Reproduction rear deck / trunk lid weatherstrip seal for the Mercury Cougar or Ford Mustang. A cheap piece that will keep water out and keep your trunk from rusting. Replaces Ford part #: C5ZZ-6543720. While you're...

Buy

$13.65
Frequently
Purchased With

Item #: 26468 [More info]
[More info] Decal - Rear Deck / Trunk Lid - Lock Cover Plate - COUGAR - Repro ~ 1967 - 1968 Mercury Cougar
This decal was used on the Standard model Mercury Cougar for 1968 and both the XR7 and Standard model Mercury Cougar for 1967. Will require slight trimming for perfect fit. If you place a piece of 80 grit sand...

Buy

$18.33
Frequently
Purchased With

Item #: 25866 [More info]
[More info] Seal - Roof Rail Weatherstrip - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
When it's time to replace your old decaying foam seal, go with our reproduction weatherstrip retainer foam roll with peel off adhesive. Goes between the roof and door / window channel. These are not...

Buy

$11.85
Frequently
Purchased With

Item #: 90004 [More info]
[More info] Manual - Complete Electrical Schematic - Free Download ~ 1967 Mercury Cougar
2.6 MB Downloadable PDF file of the complete 1967 Mercury Cougar electrical wiring diagram used by Ford Technicians. You will receive a download link both on the order confirmation screen and via email once your...

Buy

$0.00
Frequently
Purchased With

Item #: 10250 [More info]
[More info] Electric Conversion Kit - Grille / Headlight Eyelid Door - New ~ 1967 - 1968 Mercury Cougar
This conversion will replace the old, tired, vacuum system that likes to leak and wear out. This kit consists of two electric actuator assemblies (new Mazda Miata motor) with a plug and play wiring loom for easy...

Buy

$659.85
Frequently
Purchased With

Item #: 19191 [More info]
[More info] Backer Boards - Door Panel - Standard / Decor / XR7 - PAIR - Repro ~ 1967 - 1968 Mercury Cougar
Don't throw away those panels just because the backing boards are broken and warped! You cannot buy reproduction panels for the 67-70 Mercury Cougar, but you can get this pair of backer boards. If your vinyl is...

Buy

$107.71
Frequently
Purchased With

Item #: 11092 [More info]
[More info] Hood Hinges - Driver and Passenger - PREMIUM - PAIR - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Improved reproduction right and left hand hood hinges for the Mercury Cougar and Ford Mustang. Much heavier duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs,...

Buy

$101.55
Frequently
Purchased With

Item #: 26627 [More info]
[More info] Gasket - Lock Cylinder - Door / Deck / Trunk Lid - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Door lock and trunk lock gasket as found on all 1969-73 Mercury Cougar. Gasket used to seal the lock cylinders to the exterior door on all 1967 - 1973 Mercury Cougar and Ford Mustang as well as the trunk lock...

Buy

$0.85
Frequently
Purchased With

Item #: 30421 [More info]
[More info] Splash Shields - Front Fender To Bumper - PAIR - Repro ~ 1967 - 1968 Mercury Cougar
Exact reproduction of originals but improved!On the originals, the mounting holes did not line up properly so we made them fit perfect!Made using the original Ford blue prints and a NOS original for the pattern....

Buy

$68.25
Frequently
Purchased With

Item #: 42233 [More info]
[More info] Armrest - Front - PARCHMENT / OFF-WHITE - EACH - Repro ~ 1967 Mercury Cougar
Reproduction front armrest in parchment / off-white for the Mercury Cougar. This unit is ambidextrous, meaning it will fit either the driver (left hand) or passenger (right hand) sides. Although many vendors would...

Buy

$19.45

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

C3B05