Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1249-1296 of 1684
$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 26524 -

Seals between chrome vent frames and door on exterior side. Stops water from leaking between vent window and door. Keep in mind that this seal comes as one strip and it meant to be cut down the middle.Sold as a pair.Replaces Ford part #: C6OZ-6322280 or C6OZ-63222A80-A.

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 26601 -

These high quality vent window seals are the first on the market to replace the original Ford part exactly. This is the small seal at the front of the door and next to the door weatherstrip. Sold as a pair. Replaces Ford Part #:C7ZZ-6522332/3

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 10535 -

Mounts to the door jamb and keeps water from going into the quarter panel. Sold as a pair. Replaces Ford part #: C7ZZ-6528182 and C7ZZ-6528183

$0 Price: $8.45

Buy Details

Availability: In-Stock Item
Item #: 26632 -

Reproduction door to window seal for all 1967-68 Mercury Cougar and Ford Mustang. Technically though

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 26586 -

Reproduction door glass seals for the front of the door to the window glass for the Mercury Cougar or Ford Mustang. Replaces Ford part # C9ZZ-6520264. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! 1969 Glue-In Glass: The Comprehensive Repair Guide Video

$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 10907 -

Premium reproduction rubber seal with the proper thickness of the 1967-68 seal as found on Mercury Cougar and Ford Mustang except these are not molded to the extension contours. Starting in 1969 this channel seal was manufactured slightly smaller which tightened up the gap on the fender and quarter extension seals. This seal maintains the slightly larger gaps. Sold as a pair, two pairs needed per car.  Each package has 2 strips of 25 1/2" lengths. *NOTE* Do not over tighten the...

$0 Price: $1.31

Buy Details

Availability: In-Stock Item
Item #: 26637 -

Parking Light Lens Seals are sold as a pair. Fits the 67 and 68. Replaces Ford part #: C5ZZ-13211.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 19966 -

These form a seal between your rear marker lights and the quarter panels. Replaces part # D1ZZ-15447. Sold as a pair.

$0 Price: $9.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32041 -

Used seat belt anchor plate that has been cut out from a car in our salvage yard. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like the 1967-73 cars. We have noticed that the last generation 1971-73 Cougars had 4 round shaped plates in the rear floors. Same threads, all work the same. These were pretty much used on all Ford cars starting in...

$0 Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0003 -

Good used original seat belt bolt. There were a few different variations of this bolt, some were stamped with a B and others had no stamping at all. 13/16" hex head, 1-1/2 inch bolt with a 3/16 inch shoulder. 

MSRP:$1.99
$1.99 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27348 -

New black plastic access plug as found on most all 1971-73 Mercury and many other Ford cars starting in 1970. It only comes in black, the color can be changed with the appropriate color of interior paint. This is a near match to the originals that have become chalky over time. It does come with a texture, but the original texture is courser than these new plugs. Replaces Ford part number D0AB-62611B32.

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26270 -

Reproduction Seat Belt Retractor Instruction Tag for the 1967 Mercury Cougar / Ford Mustang

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 19968 -

The knobs for the seat track release to adjust the position of the seat. The reproduction has a slightly deeper divot where you place your finger, and is slightly more round on the bottom, but a very nice reproduction. Replaces Ford Part #: C5AZ-6261753-BA.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 41739 -

These are often cracked or collapsed causing your seats to lean back too far. One kit does one seat, two kits required per car.*NOTE* Don't discard your original screws! The screws supplied with this kit have a head that is just slightly smaller than original so when you really tighten the screws down the head goes right on through the stop! A very small washer will cure the problem if you choose to use the screws supplied. Replaces Ford Parts #: C8ZZ-6560310 & C8ZZ-6560311

$0 Price: $8.87

Buy Details

Availability: Out of Stock
Item #: 25460 -

D1ZZ-6561828-A Good used replacement spring for the bucket seat tracks on all 1971-73 Mercury Cougar and Ford Mustang Bucket seat sliders. This is the spring on the lever side.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25461 -

D1ZZ-6561883-A Spring that keeps tension on the adjusting seat track latch, it keeps it locked. 1971 Mercury Cougar and Ford Mustang Bucket Seats.

$0 Price: $1.80

Buy Details

Availability: In-Stock Item
Item #: 32926 -

3/8-16X1-1/8 Grade 5 flange bolt for attaching bucket seat tracks in any 1971-73 Mercury Cougar or Ford Mustang. Sold individually, 4 needed for each seat. Replaces Ford part number 56340-S2.

$0 Price: $2.15

Buy Details

Availability: In-Stock Item
Item #: 15032 -

Installs between seat track and carpet. Four per bucket seat, normally only seen on the 1967 model year. These reproductions work fine but look a little different than the originals.Sold individually.Replaces Ford Part # C5ZZ-13190-K

$0 Price: $7.55

Buy Details

Availability: In-Stock Item
Item #: 13977 -

Black plastic selector button for all 1968-72 Mercury Cougar and Ford Mustang with automatic transmission. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had simulated leather wrapping. Ford part C5ZZ-7C488-M and C5ZZ-7C488-D. Your buttons may have faded to gray after many years. These black buttons are injection molded plastic and have steel wear plates just like the originals. Technically this is a copy of the...

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10452 -

Black plastic selector button for all 1967 Mercury Cougar and 1965-67 Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had simulated leather wrapping. Ford part C5ZZ-7C488-M. Check out our video on rebuilding your shifter below: ...

$0 Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10453 -

Black plastic dummy button for all 1967 Mercury Cougar and 1965-67 Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is the non-moving button on the right side of your shifter handle. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had simulated leather wrapping. Ford part C5ZZ-7C488-D.

$0 Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10692 -

Black plastic dummy button for all 1968-72 Mercury Cougar and Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is the non-moving button on the right side of your shifter handle. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had faux leather wrapping. Ford part C8ZZ-7C488-A.

$0 Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 26280 -

Reproduction Service Specifications Decal for the 1971 Mercury Cougar

$0 Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0166 -

378696-S Special set screw for the front door channel and vent window frame. This one is longer than the one that installs in the rear door window guide. This set screw has a 5/32" hex head with 5/16" NC threads and is 1-7/8 inches in overall length. This set screw also has a 1-1/8 inch diameter shoulder. Sets and holds your front door glass and vent window angle to allow a proper seal. Three set screws work in conjunction for each door glass and vent window combination. See your shop manual...

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0165 -

375694-S2 Special set screw for the rear door guide. This one is shorter than the two that install in the vent window frame and front door glass channel. This set screw has a 5/32" hex head with 5/16" NC threads, and is 1-9/16 inches in overall length. This set screw also has a ¾ inch diameter shoulder. Sets and holds your door glass angle to allow a proper seal. Three set screws work in conjunction for each door glass and vent window combination. See your shop manual for actual procedure.See...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27512 -

New 8-32 set screw for the rear window crank handles. Fits 1968-70 Mercury Cougar and Ford Mustang. Allen hex size of 5/64".

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25589 -

D3WY-17C760-A Rubber insulator that fits along the front edge of the stone deflector. We call it an anti rattle bumper, there are a total of 6 of these used on the 1973 Cougar stone deflector. Sold individually.

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41370 -

Automatic shifter dial black background. This part screws to the shifter bucket, and sits under the pointer when everything is assembled in your shifter bucket assembly. Fits all 1969-73 Mercury Cougar and Ford Mustangs with automatic transmissions. Original Ford part number C9ZZ-7A213-A also can be D1ZZ-7A213-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 10903 -

Reproduction of the little plastic shift indicator arrow, that is illuminated by the little bulb in your shifter housing. Fits 1969-73 Mercury Cougar and Ford Mustang. Also fits 1971 and newer Pinto, Bobcat, Maverick and Comet with floor shift automatic transmissions. Ford part number C9ZZ-7A110-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 20122 -

If your automatic floor shifter has play in it left to right then this is the culprit. Easy to install, (more difficult if you have a 67-68 with center console) these are made from a wear resistant plastic that is better than original. Sold as a pair as two are required per car. This bushing was used in all Ford products equipped with a floor shift automatic from the 1965 Mustang to the late 70's Pinto. Replaces Ford Part # C5ZZ-7A133-A Check out our video on rebuilding your shifter below: ...

$0 Price: $8.45

Buy Details

Availability: In-Stock Item
Item #: 10341 -

Steel retaining plate. Ford part number C5ZZ-7B233-A. This plate is needed to fasten the shift indicator bezel on non-console cars. Fits 1967-68 Mercury Cougar and 1965-68 Ford Mustang, without console. Nice reproduction part, better value than used. You may also need a set of 4 attaching screws. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10459 -

Allen head set screw for all stock Ford automatic shifter handles on any 1967-73 Mercury Cougar or Ford including Mustang. Uses the same 3/32 inch allen wrench for attaching as the originals. Most handles take two of these set screws, one on the dummy button, and one to attach to the top of the shifter lever. The 1973 all chrome shift handle only uses one of these set screws. Original Ford part number 374985-S. Check out our video on rebuilding your shifter below: ...

$0 Price: $3.15

Buy Details

Availability: In-Stock Item
Item #: 13928 -

This hard plastic part slips over your floor shifter stem and keeps coins and such from falling inside your center console. Replaces Ford part number C7ZZ-7C445-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 53235 -

Short rubber valve stem and cap for Ford wheels or any steel wheel with a 0.453" hole. Snap in style, sticks up 1-1/4 from wheel surface. These will work with our aftermarket Ford wheels without trim rings. These have the Dill 627 caps. Same as the 1960's cars.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0393 -

Quarter window upper adjusting screw and nut - used. Mounts to the extension assembly bracket. For all 1969-70 Mercury Cougars and Ford Mustangs. Includes bolt and nut as shown. Fits hard top coupes and convertibles, N/A for fastback or sport roof Mustang.Ford number is 381742-S2 and 376762-S2 for nut.

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 11783 -

This never came on a Cougar, but it is a nice upgrade from the string that attaches your seat belt shoulder strap to the coat hanger when the shoulder strap is not in use. Fits all models except convertible. Originally, the shoulder strap connected to the bolt cover on one end, And to a string on the shoulder strap that connects it to the coat hook to keep it out of the way when not in use. This new hook slides into the track on the back of the moulding over the door, and is used instead of...

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 31889 -

These are the caps placed on the inside of the rear marker reflectors to protect your trunk's contents from damage. These Reproductions are grey. They were originally black with varying shades of grey. Sold in pairs, two pairs per car. Click on images to enlarge. Here is the Rear Marker Reflector without a cap. Here is the new cap on the marker. After you install the Rear Marker, screw the cap onto the Marker from the inside of the trunk. Below is a good used cap on the Marker. ...

$0 Price: $4.25

Buy Details

Availability: In-Stock Item
Item #: 26651 -

Sold as a pair. These gaskets seal the lens to the light housing on the 1968 side marker lights found on the fenders of the 1968 Cougar.

$0 Price: $6.89

Buy Details

Availability: Out of Stock
Item #: 19267 -

Coming from Western parts cars these brackets are unusually nice in comparison to what you will find in other regions. For and extra $1.50 we can include the mounting nuts. Right is the same as left, two brackets required per car, sold individually. We also carry restored Zinc Plated brackets. ...

$0 Price: $1.65

Buy Details

Availability: In-Stock Item
Item #: 26491 -

Replaces C9AZ-15447. Sold as a set of four.

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 26213 -

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $1.92

Buy Details

Availability: In-Stock Item
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...