Contact Us / Visit Us (click here)
Office/Warehouse Closed Jan 1, 2025.
International Customers Click Here [Updated 1/2025]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3217-3264 of 5340
$0 Price: $150.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27108 -

Used XR7 rear interior panel in saddle for the driver side (left hand) of the Mercury Cougar XR7 coupe. This was the top of the line interior trim package and could only be had with an XR7 model. XR7 interior codes start with 6, 7, or F, followed by a single letter denoting the color. *NOTE* Arm rests sold separately. Specify if your Cat requires power window cutouts in the comments section.

$0 Price: $150.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27107 -

Used XR7 rear interior panel in saddle for the passenger side (right hand) of the Mercury Cougar XR7 coupe. This was the top of the line interior trim package and could only be had with an XR7 model. XR7 interior codes start with 6, 7, or F, followed by a single letter denoting the color. *NOTE* Arm rests sold separately. Specify if your Cat requires power window cutouts in the comments section.

$0 Price: $19.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19124 -

Good used L bracket that is not heavily rusted or bent. Passenger side is marked from the factory with an "R" and driver side is marked with an "L". The portion with the lip mounts vertically and the purpose of the lip is to align the splash shield into the proper location.

$0 Price: $16.78

Buy Details

Availability: In-Stock Item
Item #: 15862 -

Reproduction pair of lower fender braces. The portion with the lip mounts vertically and the purpose of the lip is to align the splash shield into the proper location.

$0 Price: $19.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19125 -

Good used L bracket that is not heavily rusted or bent. Passenger side is marked from the factory with an "R" and driver side is marked with an "L". The portion with the lip mounts vertically and the purpose of the lip is to align the splash shield into the proper location.

$0 Price: $140.27

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 13806 -

This reproduction fiberglass valance actually is better quality than you might guess... The mold was made from a NOS FoMoCo valance and as you look at the pictures you will notice that every tiny detail was mimicked. This is a good alternative for those trying to shed a few pounds as they are much lighter than OEM and keep in mind our steel reproductions are substantially heavier than OEM.Replaces Ford part # C9WY-6540544-A

$0 Price: $194.27

Buy Details

Availability: In-Stock Item
Item #: 32437 -

Quality reproduction steel rear lower valance for the 1969 - 1970 Mercury Cougar. This Dynacorn reproduction is actually made of thicker stock than OEM. The original's weight is 4.6 lbs and this new reproduction weighs in at 5 lbs. We've tested this valance on a few of our cars and found them to fit exceptionally well. Mounting hardware is sold separate. Also available in fiberglass.Replaces Ford part # C9WY-6540544-A. ...

$0 Price: $109.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10015 -

Rear seat bottom or lower cushion from any 1967-70 Mercury Cougar. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship. Replaces Ford part number C7WB-6563120. This part number or engineering number would have originally been stamped into a tag that was attached to the bottom side of the seat. *Note - Will not fit Mustang, Mustangs 1967-68 seat bottoms (C7ZB-6563120) are the same width as Cougars, but the seating portion...

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10016 -

Rear seat back or upper cushion from any 1967-70 Mercury Cougar. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship. Replaces Ford part number C7WB-6566700.  This part number or engineering number would have originally been stamped into a tag that was attached to the back side of the seat.  There are claims that this part will also work in the Mustang coupe, but the 67 - 70 Mustang would have originally...

$0 Price: $467.75

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15572 -

This rear segment exhaust system is manufactured right here in the good old USA from original 1968 and 1969 Mercury Cougars. This direct replacement system includes: 2 intermediate pipes, 2 mufflers, and a right and left tail pipe. The system is constructed from 2 inch aluminized piping and features blue printed bends with everything being replicated as close as possible to the original. The mufflers in the system have the hanging tabs attached so that they will accept original muffler...

$0 Price: $467.75

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15574 -

This 2-1/4 inch rear segment exhaust system is manufactured right here in the good old USA from an original 1969 M code Cougar. This direct replacement system includes: 2 intermediate pipes, 2 mufflers, and a right and left tail pipe. The system is constructed from 2-1/4 inch aluminized piping and features blue printed bends with everything being replicated as close as possible to the original. The mufflers in the system have the hanging tabs attached so that they will accept original muffler...

$0 Price: $467.75

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15573 -

This 2-1/4 rear segment exhaust system is manufactured right here in the good old USA from an original 1969 R code Cougar. This direct replacement system includes: 2 intermediate pipes, 2 mufflers, and a right and left tail pipe. The system is constructed from 2-1/4 inch aluminized piping and features blue printed bends with everything being replicated as close as possible to the original. The mufflers in the system have the hanging tabs attached so that they will accept original muffler...

$0 Price: $81.82

Buy Details

Availability: In-Stock Item
Item #: 25999 -

Since at least 2 speakers (channels) are required for stereo radios, this speaker system has been developed for classic vehicles that came with only one mono speaker. These dual voice coil "DVC" speakers will give you the best possible sound from your original speaker location. DVC speakers have up to 70% more cone area than the conventional dual speaker assemblies giving you improved bass response and 140 watt power handling. Both stereo channels connect directly to one speaker with dual...

$0 Price: $58.25

Buy Details

Availability: In-Stock Item
Item #: 11618 -

This mirror came primarily on the 1969 Cougars, but have also been seen on the 1968. It has a forward /back flip lever to switch from day to night view. Comes in black only, case is of a hard plastic as opposed to the original hard vinyl case. The texture is not as heavy as original. Replaces Ford Part #: C7AZ-17700-G. This picture below shows the rear view mirror variations from 1967-1973. Check out this video ...

$0 Price: $45.86

Buy Details

Availability: In-Stock Item
Item #: 13798 -

This mirror came primarily on the 1968 Cougars, but have also been seen on the 1969. It has a twist lever to switch from day to night view. Comes in black only, case is of a hard plastic as opposed to the original hard vinyl case. The texture is not as heavy as original. Replaces Ford Part #: C7AZ-17700-G. This picture below shows the rear view mirror variations from 1967-1973. Check out this video ...

$0 Price: $59.95

Buy Details

Availability: In-Stock Item
Item #: 33939 -

Reproduction rearview mirror lens for the Late 68 - 73 Cougar or Mustang. This lens is slightly smaller than the original, but fits well because the original mirror base does shrink over time. We STRONGLY suggest you watch our "how to" video prior to attempting to remove your lens. Keep in mind glass is porous and is prone to staining.  Check out this video Check out this video ...

$0 Price: $59.85

Buy Details

Availability: In-Stock Item
Item #: 11040 -

Restored rear view mirror lens for the Mercury Cougar or Ford Mustang. Due to time constraints, we can no longer offer the service of having your own mirror restored, this is now an exchange based service only.Any mention of it in the video below is outdated, please disregard.  We STRONGLY suggest you watch our "how to" video prior to attempting to remove your lens and send it in. Keep in mind glass is porous and is prone to staining. Often times these faint stains do not show up until...

$0 Price: $59.85

Buy Details

Availability: In-Stock Item
Item #: 11041 -

These rear view mirror lenses are sold on an exchange basis.  Due to time constraints, we can no longer offer the service of having your own mirror restored, this is now an exchange based service only.Any mention of it in the video below is outdated, please disregard. We STRONGLY suggest you watch our "how to" video prior to attempting to remove your lens and send it in. Keep in mind glass is porous and is prone to staining. Often times these faint stains do not show up until the glass...

$0 Price: $395.87

Buy Details

Availability: Out of Stock
Item #: 22554 -

Rear defog conversion kit for 1970 Mercury Cougar XR7's. Includes switch and DEFOG panel, switch wiring, power lead, long harness to blower motor, and blower motor and grille cover which installs in the rear package tray. Please see your electrical schematic for connection details. This set up can easily be installed into a 1969 XR7 as well. You may need to purchase an accessory lead and buss bar if your car was not equipped. Everything has been tested to be in working condition.

$0 Price: $328.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11430 -

Very good used door glass with no deep scratches (multiple faint scratches and water spots often will be present). Not perfect but the best you could expect to find from a 50 year old plus parts car and will of course be a better fit than repro. Look for the SUN-X logo to determine if your glass is tinted or not. For those wanting Grade "A" glass, we recommend calling us so we can discuss with you the glass that we have available.Need a little help identifying some of the markings on your...

$0 Price: $137.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11429 -

Used grade "B" clear rear window glass for the Mercury Cougar coupe. This unit has multiple fine scratches and water spots and is good for driver or something to "just plug the hole." It is almost impossible to remove even fine scratches from tempered glass. 

$0 Price: $330.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11427 -

Quality CLEAR Rear Window Glass for the 1969 or 1970 Mercury Cougar. Will not come the the "Carlite" logo or a date stamp. This glass does not have the faint Car-Lite markings in the corner but rather very bold, large SAFETY GLASS in raised letters that cannot be removed without special equipment. Many feel a few minor scratches on an original look better than the raised white lettering found on repros. Keep in mind the fit is slightly better on the used original. Keep in mind that the...

$0 Price: $137.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11428 -

Used grade "B" tinted rear window glass for the Mercury Cougar coupe that features the "Sun-X" green tint. This unit has multiple fine scratches and water spots and is good for driver or something to "just plug the hole." It is almost impossible to remove even fine scratches from tempered glass. All air conditioning cars were supposed to always come with tinted glass, but we have documented cases of them coming with clear glass. Tinted glass was also available as an option in cars not...

$0 Price: $350.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11425 -

Quality reproduction GREEN TINTED rear window glass that unfortunately does not have original "Carlite", "SUN-X" markings or date code. This glass does not have the faint Car-Lite markings in the corner but rather very bold, large SAFETY GLASS in raised letters that cannot be removed without special equipment. Many feel a few minor scratches on an original look better than the raised white lettering found on repros. Keep in mind the fit is slightly better on the used original. Keep in mind...

$0 Price: $9.47

Buy Details

Availability: In-Stock Item
Item #: 14-0070 -

Professional strength adhesive for attaching your rearview mirror bracket to your windshield. Good for 1968 - 1973 Cougars and Mustangs. 1967's Didn't have the bracket attached to the windshield.

MSRP:$57.49
$57.49 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 26148 -

New disc brake proportioning valve / distribution block seal and rebuild kit for the Mercury Cougar or Ford Mustang / Torino. Every 1967-69 Cougar, Cyclone, Torino, Ranchero and Mustang equipped with disc brakes needs this kit even if you are not leaking fluid yet. These little "O" rings are always "rock hard" after 40 plus years because the original O-rings are composed of a BASIC nitrile compound. After several years, the absorption of brake fluid will change the molecular structure of the...

$0 Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 27604 -

Kit for rebuilding your drum brake distribution block on your Mercury Cougar or Ford Mustang. Special square O-rings are made from EPDM (Ethylene Propylene 70 Durometer) which is specifically designed to withstand chemical degradation caused by prolonged exposure to brake fluid.*Customer Feekback*"You guys are awesome, I couldn't find a rebuild kit for my Galaxie's brake distribution block anywhere else! Thank you!" Henry M.Check out this video ...

$0 Price: $276.58

Buy Details

Availability: In-Stock Item
Item #: 33415 -

This all inclusive vacuum booster master rebuild kit is great for the do it yourself-er or the person that would like to retain their original case / housing. Also a great option for the out of country customer that does not want to pay expensive shipping to return a core. Keep in mind this will only work on a BENDIX unit with the crimped band. Also be aware that our rebuilt units we sell do not have 100% new parts as shown here as our builder will reuse multiple parts that can be cleaned up...

$0 Price: $210.47

Buy Details

Availability: In-Stock Item
Item #: 33172 -

Basic C6 transmission rebuild kit. Kit includes gaskets, seals, bands, filter, modulator, everything as shown. Fits all Ford C6 transmissions for any 1967-73 Mercury Cougar or Ford Mustang with that U code C-6 transmission. Quality kit, same as supplied to professional shops. Big and small block C6's.

$0 Price: $49.95

Buy Details

Availability: In-Stock Item
Item #: 10481 -

Basic kit for rebuilding your Ford Autolite or Motorcraft square bore 4300 or 4 barrel carburetor. This kit is not for later spreadbore carburetors. Spreadbore carburetors have much larger secondary venturis. See picture.

$0 Price: $123.64

Buy Details

Availability: In-Stock Item
Item #: 32328 -

Most complete kit available for rebuilding the late 1967-70 Mercury Cougar or Ford Mustang power steering control valve. Includes a very accurate sleeve, all 4 seats, and various seals and hardware. Please note that the early 1967 control valves did have 1/4 inch lines. Keep in mind many of the high mile control valves in circulation are worn beyond factory tolerances and are not easily rebuilt. Our re-manufactured units are a great solution if this is the case. Replaces Ford Part #:...

$0 Price: $56.75

Buy Details

Availability: In-Stock Item
Item #: 25928 -

Great kit for those that have a good used power steering control valve unit to rebuild.  Keep in mind many of the high mile control valves in circulation are worn beyond factory tolerances and are not easily rebuilt. Our re-manufactured units are a great solution if this is the case. Replaces Ford Part #: C2AZ-3A533-A.

$0 Price: $132.51

Buy Details

Availability: In-Stock Item
Item #: 33173 -

Basic FMX transmission rebuild kit. Kit includes gaskets, seals, bands, filter, modulator, everything as shown. Fits all Ford FMX transmissions for any 1969-73 Mercury Cougar or Ford Mustang with that X code FMX transmission. Quality kit, same as supplied to professional shops. 

$0 Price: $321.75

Buy Details

Availability: In-Stock Item
Item #: 13474 -

This all inclusive vacuum booster master rebuild kit is great for the do it yourself-er or the person that would like to retain their original case / housing. Also a great option for the out of country customer that does not want to pay expensive shipping to return a core. Keep in mind this will only work on a MIDLAND unit with the removable band. Also be aware that our rebuilt units we sell do not have 100% new parts as shown here as our builder will reuse multiple parts that can be cleaned...

$0 Price: $215.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12764 -

Please remove your regulator prior to shipping. Be careful of the mechanical energy stored with the spring under tension.  This is a rebuild service for the rear pancake motor for the Mercury Cougar or Ford Mustang. We completely disassemble these units, then clean and inspect them. Then we will repair or replace minor pieces inside. Please note that if your core is not rebuildable, there will be an extra charge for installing working parts. After the motor is repaired, we...

$0 Price: $72.85

Buy Details

Availability: In-Stock Item
Item #: 11-9913 -

Air conditioning bearing replacement service. Send your flat bearing style, fixed or adjustable A/C pulley and we will exchange it or rebuild your exact pulley with a new flat bearing. Either large or small flat bearings, same price.  Dust caps hand fitted, for seamless installation. No extra tool marks, other than the factory peening. Check photos.Ford casting #'s D0AA-8A617-B, D0AZ-8678-D, C8AZ-8678-B, C8AZ-8678-C, C8AZ-8678-A, D8OH-19W653-A, D0AZ-8678-D.*Note* All new bearings will...

$0 Price: $239.27

Buy Details

Availability: In-Stock Item
Item #: 32192 -

This option requires that you send your core in advance. Your core gets rebuilt and returned. If you don't have a core, WCCC has come across a few from our wrecking yard, give us a call to discuss details. Our service is to rebuild your sending unit. A quality core is required. Yes, we can rebuild other than 1967-73 Mercury Cougar and Ford Mustang sending units. 1967-1980 Ford / Mercury / Lincoln sending units accepted. See our related listing for non-low fuel sending unit rebuilding. A...

$0 Price: $198.77

Buy Details

Availability: In-Stock Item
Item #: 32405 -

This option requires that you send your core in advance. Your core gets rebuilt and returned. If you don't have a core, WCCC has come across a few from our wrecking yard, give us a call to discuss details. Our service is to rebuild your standard fuel sending unit. A quality core is required. Yes, we can rebuild other than 1967-73 Mercury Cougar and Ford Mustang sending units. 1967-1980 Ford sending units accepted. See our related listing for low fuel sending unit rebuilding. A quality...

$0 Price: $174.29

Buy Details

Availability: In-Stock Item
Item #: 10445 -

Basic kit for rebuilding a 1967-70 Holley model 4150 4 barrel carburetor. Includes illustrated instructions. Holley packaged renew kit. This kit is not for model 4160 or other Holley carburetors. See pictures of Holley 4150 below. Click on images to enlarge. ...

$0 Price: $25.45

Buy Details

Availability: In-Stock Item
Item #: 31383 -

Reproduction C5AZ-7630702-A Ashtray receptacle for 1969-70 Mercury Cougar and Ford Mustang. Only the rear door panel ashtrays in the back seat area. Slightly deeper than the OEM ash trays, plenty of room for installation. Receptacle only, sliding covered retainer sold separately, find it here. Also fits 1965-68 Ford and Mercury full sized convertibles. 

$0 Price: $37.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11323 -

C5AZ-7630702-A Ashtray receptacle for 1969-70 Mercury Cougar and Ford Mustang. Only the rear door panel ashtrays in the back seat area. Receptacle only, sliding covered retainer sold separately. Also fits 1965-68 Ford and Mercury full sized convertibles. Decades old gum stuck to the bottom is no extra charge...

$0 Price: $17.42

Buy Details

Availability: In-Stock Item
Item #: 42060 -

These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 41506 -

This area of the door often cracks due to the stress caused by worn out hinges. This twelve piece kit includes six screws and six form fitting washers to reinforce the recessed areas that often crack. If your latch area is badly cracked you will want to purchase the repair kit that requires being welded in.

MSRP:$34.99
$34.99 Price: $33.48

Buy Details

Availability: In-Stock Item
Item #: 14-0001 -

This pair of plates cut from 11 gauge steel (1/8") are designed to be welded onto the front crossmember that braces the front frame rails and ties together the lower control arm pivots in a superior way to the original design. When welded onto the front crossmember properly, these plates will prevent any camber change in hard cornering. This is not needed for the average Cougar owner, but if you are desiring to make your car a "Handling Machine", every bit counts. This combined with our shock...

$0 Price: $32.27

Buy Details

Availability: In-Stock Item
Item #: 12-3008 -

New pair of weld in shock tower reinforcement plates cut from 11 gauge steel (1/8") for the Mercury Cougar or Ford Mustang. It is common knowledge that one of the main design flaws of the early Cougar or Mustang are the shock towers. Because of this design flaw, it is common (even with pampered, low mile, completely stock cream puffs) for the shock towers to have some degree of cracking as they were never designed to fit an oversized wheel and tire package, be cornered hard or handle the heavy...

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30550 -

Used flexplate reinforcing ring, Ford called it a fly wheel reinforcing plate. Fits all Ford small block engines including 260, 289, 302, 351W and 351C. Strengthens the area where the automatic transmission flex plate mounts to the crankshaft. This is not just a ring with 6 holes in it, it is indexed specifically for the flex plate and only goes on one specific way. It has to be indexed because of the weight on the flex plate. Just under 4 inches in diameter. Special bolts not included, but...

$0 Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 30215 -

Reproduction flexplate reinforcing ring. Strengthens the area where the automatic transmission flexplate mounts to the crankshaft. 5.12" outside diameter3.34" inside diameter .060 inches thickFits: 352 390 427 428 429 460 with C6 and FMX transmissions.Replaces Ford part # B9AZ-6A6366-B