All Products

Reproduction passenger side (right hand) quarter window moulding / trim for the Mercury Cougar. This unit also comes with a used aluminum mounting bracket. Some refer to this unit as a "Hockey Stick" or "J moulding" and it mounts at the base of the rear quarter windows. These mouldings almost always need to be replaced due to pitting or having holes drilled in them to fasten them in place. We have found that this 3M product works great for bonding these mouldings / trim to the mounting bracket...

Restored aluminum rear deck lid moulding / trim for the Mercury Cougar. If you do not have cores that are worthy of restoration we do have them for sale. The better core you start out with, the better the end result will be! If you prefer a mirror like luster then I suggest you purchase the 1969-70 deck moulding as stainless offers a much brighter finish. Seven clips are used to install the deck lid moulding and we have new clips available here. We will accept extra cores in on exchange for...

This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the aluminum corner mouldings perfectly. Seven clips are...

This option REQUIRES sending your core in advance. This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the...

REQUIRES sending your cores in advance.This is a restored aluminum hood trim from an early 1971 Mercury Cougar or Ford Mustang. Rear of hood trim Ford part # D1ZZ-16B918-A. Our restored aluminum trim is correctly bright dipped or anodized like originals.Technically this trim piece was only used during the first 6 months of production on 1971 Mercury Cougar and all XR7 models including  convertibles. 1971 Ford Mustang. These will fit all third generation years 1971-73 Mercury Cougar...

This is the stainless steel trim for the front of the boot that attaches to the upper, back side of the back seat in a 1971 to 1973 Cougar and Ford Mustang. This is a very hard part to come by in good shape.

Unlike our reproduction rocker mouldings, we can sell these used mouldings individually (shipping is the same price when you buy one or several). Even though there is no difference in fit or part number, we do ask that you choose passenger side or drivers side by mentioning it in the notes as the finish is always duller on the front end, behind the front tires from road debris. The majority of our used 1968 rocker moldings have one screw hole towards the front. Reason being is that there were...

This used to be a decent off-shore quality pair of anodized aluminum mouldings. Our guess is that the tooling is starting to show wear and needs replacing as evidenced by the wrinkles in the corners. We have alerted the manufacturer but they can be slow to act. There are no returns on this blemished, less than perfect part. Ford issued a TSB (technical service bulletin) instructing the Service Departments to drill a hole through the rocker moulding into the lower fender and install a chrome...

Front driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores.

Rear driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores. ...

Why is this right rear wheel lip so costly and difficult to find these days? Consider this... The right rear was the first to go obsolete from Ford. The right rear is the one most likely to get damaged because of it being the corner that is in the "blind spot". Remember, these early Cougars did not have RH mirrors! Lastly and maybe the most relevant is the fact that the right rear wheel is your traction tire which means more damage from flying road debris, loose tire chains and the like. It...

Good used wheel lip moulding with no corrosion, obvious scratches or dents. Will have some what rough texture down low on the leading edge from road debris. This moulding will still have a good shine but do not expect NOS quality from a used piece of aluminum such as this one. When sending us a core in exchange please do not send twisted, ripped, corroded parts for an exchange. Dull, slightly dented, warped or scratched (not gouged) trim parts are OK as cores. If you are in question as to...

Rear passenger side wheel lip moulding. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images...

Restored pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. These units have been restored using the correct bright dip anodize and will look better than NOS.  Ford part # driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Restored driver side (left hand) vertical windshield moulding / trim for the Mercury Cougar or Ford Mustang convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. When you purchase one of our stainless trim parts you are paying for the removal of dings and scrapes as well as the polishing of the part.  Ford...

NOS driver side (left hand) vertical windshield moulding / trim for the Mercury Cougar or Ford Mustang. Ford part # C5ZZ-6503137-B.

Restored exterior driver side (left hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the bottom side. If your cores are missing studs then you will receive like parts in exchange. The studs can be reattached to the bottom side so do not discard those lose parts! If you have questions about your...

Restored exterior passenger side (right hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the bottom side. If your cores are missing studs then you will receive like parts in exchange. The studs can be reattached to the bottom side so do not discard those lose parts! If you have questions about your...

This restored OEM stainless steel lower windshield moulding / trim has been restored to a level far beyond NOS. It has been polished to a mirror like finish that is brilliant and gleaming. The term "over restored" could be applied to this part because back in the day FORD never spent the time we invested into polishing this piece. Original parts like this one always fit and look superior to "offshore" reproductions.Ford part # C5ZZ-6503148-B.

Reproduction pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. Replaces Ford part #'s driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

NOS passenger side (right hand) upper windshield moulding / trim for your Mercury Cougar or Ford Mustang. Ford part # C5ZZ-6503144-B. 

Good used plastic trim that will need repaint, and the screw hole hidden behind dash pad is almost always cracked.Ford Part #: C9ZZ-7603599-A, stamped with C9ZB-7603599-AW-L.H. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an...

Good used plastic trim that will need repaint, and the screw hole hidden behind dash pad is almost always cracked.Ford Part #: C9ZZ-7603598-A, stamped with C9ZB-7603598-AW-R.H. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an...

Anodized aluminum top of door trim for 1971-73 Mercury Cougar XR7 models, including convertible. Ford part number D1WY-6520935-A. This driver side, trim was used on the XR7 model but is a nice upgrade for a standard Cougar. Sold separately and the price includes a $45 returnable core fee.*NOTE* The use of this XR7 unique trim requires the use of different belt-line weather strips than that of the standard, models. See drivers side trim also.Due to the difficulty in obtaining trim we no longer...

Restored passenger side (right hand) door moulding / trim that is attached to the top of the door on the Mercury Cougar XR7. This unit is made of anodized aluminum and came on the convertible XR7 as well. Also makes a nice appearance upgrade for the standard Cougar!Ford part # D1WY-6520934-A.*NOTE* If you choose to upgrade your standard Cougar with this XR7 unique piece, it will require the use of different beltline weatherstrips. Your standard beltline weatherstrips will not work with this...

Core anodized aluminum front moulding / trim set for the Mercury Cougar. This is a six piece core set of front mouldings with minor dings and scratches. Good for a poor quality driver or for restoration.  Parts will have no holes, cracks, or heavy pitting.  If you are wanting our six piece restored set and do not have a set to exchange, this listing is what you will need to purchase in conjunction with the restored set.

Upper and lower fuel filler door trim pieces for 1969 and 1970 Mercury Cougars, all models. Finish and quality of this reproduction is superior to NOS as shown in the comparison photo below. Notice the blem spot on the NOS on the right? In order to help keep costs down on some of the reproduction items we left off the black detail paint as shown. NOS on the left Repro on the right Looks great assembled. You may or may not want to mask and spray gloss black paint to replicate the stripe like on...

Upper and lower fuel filler door trim pieces for 1969 and 1970 Mercury Cougars, all models except 1970 Eliminator which were black. To receive core credit back your cores must have only light pitting and no broken studs. Original Ford part number C9WY-65405-A for the lower and C9WY-65405A48-B for the upper.

Here is our used hood lip moulding / trim 3 piece set in grade "B" condition for your Mercury Cougar. These are tough little units to find in NOS form or grade "A" condition. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. When you buy these in a set, you will save a good sized chunk of your hard earned cash-o-la! -Center Moulding: Mercury part # D1WY-16958-A, Mercury casting # D1WB-16958-AA.-Driver (left hand)...

Here is our used hood lip moulding / trim 3 piece set in grade "B" condition for your Mercury Cougar. These are tough little units to find in NOS form or grade "A" condition. This set features a 1973 only center moulding / trim piece that comes with a indentation for the "walking cat" emblem. Emblem sold separately. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. When you buy this set, you are saving a good sized...

This is the right hand and left hand 1/4 panel moulding. Some refer to these as "Hockey Sticks" or "J" mouldings. They mount at the base of the rear side windows and almost always needs to be replaced due to pitting or holes having been drilled in them to fasten these in place. Included with the moulding is super strength 3M double sided, trim tape. Original Mercury part number was C7WY-6529034-A & C7WY-6529035-A.We have found that this 3M product works great for bonding these parts...

This is right and left hand set of 1/4 panel window mouldings. Some refer to these as "Hockey Sticks" or "J" moulding. It mounts at the base of the rear side windows and almost always needs to be replaced due  to pitting or holes having been drilled in them to fasten these in place. We have found that this 3M product works great for bonding these parts in place permanently. *NOTE - Remember to remove the aluminum brackets from the bottom of your old hockey sticks,...

Reproduction four piece aluminum rear window moulding / trim set for the 71 - 73 Cougar or Mustang. Customers have mentioned that these are very hard to install on the Cougar. Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.

Reproduction set of 4 rear window mouldings / trim for the 69 - 70 Mercury Cougar. No core required, but keep in mind that we will give store credit for your original restorable trim!

This rear window moulding set has been restored to show quality. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY. Ford part #'s: Driver side upper C7WY-42431-A, driver side lower C7WY-42405-A, passenger side upper C7WY-42430-A, passenger side lower C7WY-42404-A. *NOTE* This unit carries a $200 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit...

If you shop around you will see many places charge less than this... We have tried several different places that restore stainless trim and they all came back less than mint. These are arrow straight and have been polished to a very high luster. This trim parts will accentuate your new paint job in an incredible way!"...Don - Happy Fourth of July. I wanted to send a note to your team of gratitude for all the help they provided me over the last three years restoring my Cougar. As you know, it...

Good used four piece set with no dings or heavy scratches. Ready to install on your Cougar as is or polish them to a mirror like finish to be installed on a show car.

Good used four piece aluminum rear window moulding / trim set with some dings and or minor scratches. Ready to install on your Cougar as is, or polish them to be installed on a daily driver. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. Ford part #s D1ZZ-6542405-A driver side (left hand) lower, D1ZZ-6542404-A passenger side (right hand) lower, D1ZZ-6542430-A passenger side upper, and D1ZZ-6542431-A...

New item as of February 2021! These are sold as a pair, the mounting hardware kit is sold separately. These anodized bright dip mouldings are much closer to the original design than our Premium Stainless mouldings. They are side specific (The more rounded edge mounts towards the rear and the flatter edge mounts towards the front) and will not fit on a 1970 model (due to the increased size of the wheel opening) unless you delete the wheel opening mouldings. Replaces Ford moulding part numbers...

NOTE: Some modification required to fit Cougars! These are actually 69-70 Mustang wheel lip mouldings, which have a different shape / contour. However, with a bit of massaging they can be made to fit the 71 - 73 Cougar. They are the closest alternative we have found that fits and looks reasonably good for much less than restored originals. Check out our video below, showing how easy it is to install these mouldings on a Cougar ...

Set of 4 reproduction wheel lip mouldings for the 69-70 Cougar. These are spot on and we had no problem fitting them on our cars, the only difference we noticed is that the aluminum is softer than the originals and prone to dimpling. And since they're reproductions, no cores are required! Keep in mind that when you remove your rear core mouldings, you can send them to us as they might be eligible for in store credit. For more info on aluminum trim restoration & core exchanging, check out our...

Because this windshield moulding set is comprised of used original pieces, it will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. They are a great option for those of you who like to restore your parts yourself and are also an excellent option for you Mustang owners as well (except fastback). Ford part numbers include: C9ZZ-6503136-A, C9ZZ-6503137-A,...

Restored five piece windshield trim set has been restored beyond the original luster. Keep in mind only cores with minor dings, dullness and scratches can be accepted. Kinked, gouged, and flattened cores will not be credited. This windshield moulding set fits the 1967-1968 Mercury Cougar as well as the 1964 1/2 - 1968 Mustang Coupe and Fastback. Ford part numbers for these pieces include: C5ZZ-6503136-B, C5ZZ-6503137-B, C5ZZ-6503144-B, C5ZZ-6503145-B, and C5ZZ-6503148-D. *NOTE* If...

Good used five piece windshield moulding / trim set as taken from a parts car. Finish will be dull and some pieces may have minor scratches, but overall, this set is ready to install and will look decent as is. Ford part numbers for these pieces include: C5ZZ-6503136-B, C5ZZ-6503137-B, C5ZZ-6503144-B, C5ZZ-6503145-B, and C5ZZ-6503148-D. *NOTE* Keep in mind we will buy most moulding / trim found on the Mercury Cougar. ...

Air compressor mounting pedestal for 1969 and 1970 Mercury Cougars or Ford Mustangs with 390 or 428CJ engines. Casting number C9AA-2882-A.Ford part # C9AZ-2882-A.

Used cast iron pedestal mount for the A/C compressor for Cougars and Mustangs produced before 1/3/1967. You will have to look very closley to notice the slight differences between this bracket and the later version.Ford part # C7ZA-2882-C, MPC # C7ZZ-2882-B.

Used cast iron pedestal mount for the air conditioning compressor on all 1969 cars with either the H code 351-2V or the M code 351-4V engines. Casting number C9OA-2882-B.Ford MPC part # C9OZ-2882-B.

Cast iron pedestal mount for the air conditioning compressor on all 1967 and 1968 cars with 390-2V, 390-4V, or 428CJ FE engines. Mercury and Ford master part number C7ZZ-2882-A, we suspect that this is an error in our 1975 editions of the MPC's. C7SZ-2882-A is what we suspect is the correct number. In any case, C7SA-2882-A is the factory casting number on these brackets.Below are some pictures of a 390 with AC and smog. This motor was pulled from a 1967 Thunderbird, so there are a few minor...