Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Moulding / Trim Set - Rocker Panel - ECONOMY - Repro ~ 1969 Mercury Cougar

Economy 1969 Mercury Cougar Rocker Moulding Kit

1969 Mercury Cougar

2 Review(s) 0

Item #: 31774

Price: $163.65

Cost: 13092

Earns: 655

Bonus: 0

Availability

Ships Direct from Supplier (Except International) - Ships: Ships from Supplier Warehouse in 3-10 Business Days
EXCEPT AS NOTED IN THE PRODUCT DESCRIPTION
International Orders: This item will ship from the supplier to our warehouse before shipping to your address, add 7-10 Days

Applications

1969 Mercury Cougar

Description

New item as of February 2021! We've found that these rocker panels can't be used with the original clips, you can find the reproduction mounting hardware kit here. These anodized bright dip mouldings are much closer to the original design than our Premium Stainless mouldings. They are side specific (The more rounded edge mounts towards the rear and the flatter edge mounts towards the front) and will not fit on a 1970 model (due to the increased size of the wheel opening) unless you delete the wheel opening mouldings.

Replaces Ford moulding part numbers C9WY-6510176-A and C9WY-6510177-A

Specifications:

Shipping Weight: 10.00 LBS

(weight shown may be the dimensional weight)

2 Reviews (4.25 of 5 Rating)

4.25 out of 5 stars
Based upon 2 Review(s).

5 Stars

50%

4 Stars

3 Stars

50%

2 Stars

1 Stars

Write a review!

Cobrajetter

Budget Rocker Moldings

3/23/2021

3.50 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

These look OK, good for a car that is going to be driven. I laid these next to an NOS pair I have and the difference is clear, but at this price, hard to fault. Use these and the Mustang wheel arch trims for cars that are going to be driven. They look good, and only a CCOA judge would care, but don'r think you'll fool anyone at a show. Save the NOS for your big $ restorations.

Bob

Utah

2013

Rocker Molding Trim

3/10/2021

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

look original

Cons:

No installation instructions

I haven't yet installed these rocker molding trims yet but they look great and will be an upgrade to my 69 XR 7 convertible. My originals are very ruff and I replaced them with 68 repro in 2008. Most people don't notice but I do and this will add to my cars originallity

Product Q&A

Number of questions: 3

Please login to ask a question.

Question

Darren XR7 Asked:

Will these mount witht he factory moulding clips?

January 6, 2024 2:17 PM

Question

Asked:

I received these parts included were and I see them in the photos four metal bars. What are they and how do I used them? Would be a great video on how to install these trim parts.

March 10, 2021 2:10 PM

Answer

WCCC Admin Answered:

We too would like to know! We have contacted Dynacorn and will update our description if/when Dynacorn gets back to us (they are not known for responding very quickly).

March 10, 2021 11:13 PM

Question

Asked:

These look very similar to the ones on my 70 mustang coupe. I was wondering if they might be the same?

WCCC Response:

These are a 1969 Cougar specific part, and will not even fit on a 1970 Cougar (due to the increased size of the wheel opening) unless you delete the wheel opening mouldings. The 1970 Mustang is shorter than the 1969 or 1970 Cougar (almost 9 inches shorter than the 1970 Cougar).

February 2, 2021 10:26 PM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 41550 [More info]
[More info] Clip Kit - Moulding / Trim - Rocker - PLASTIC - Repro ~ 1969 - 1970 Mercury Cougar
Sold as a set of twelve (two more than required), replaces Ford part #C9WY-6510182-A. From the factory there were five of these on each side for a total of ten per car. These same clips were also used on 1977-1979...

Buy

$115.89
Frequently
Purchased With

Item #: 10605 [More info]
[More info] Clips - Mouldings / Trim - Rocker Panel - Complete Set - PLASTIC - Repro ~ 1968 Mercury Cougar /1967 - 1968 Ford Mustang
Set includes ten rectangular clips with pop rivets and two incorrect, irregular shaped end clips (Mustang Part). These clips will fit the 68 Cougar, but are actually replicas of the clips for the 67-68...

Buy

$27.75
Frequently
Purchased With

Item #: 10580 [More info]
[More info] Clip - Moulding / Trim - Rocker - w/ Nut - METAL - EACH - Repro ~ 1968 - 1973 Mercury Cougar
Reproduction rocker moulding / trim end clip for the Mercury Cougar. This clip is a steel clip with a wire like the original. These units are technically for the 1969 and 1970 Cougar, but they will also work well...

Buy

$17.87
Frequently
Purchased With

Item #: 26566 [More info]
[More info] Bumper - Firewall - Cowl Cover To Hood - Fuel Door Bumpers - Repro ~ 1969 - 1970 Mercury Cougar - 1969 - 1970 Ford Mustang
Reproduction cowl cover to hood rubber bumpers for the Mercury Cougar or Ford Mustang. These little units attach to the front of the cowl cover for the back corners of the hood to sit on. These will also work for...

Buy

$2.35
Frequently
Purchased With

Item #: 10907 [More info]
[More info] Seals - Fender / Quarter Extension - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Premium reproduction rubber seal with the proper thickness of the 1967-68 seal as found on Mercury Cougar and Ford Mustang except these are not molded to the extension contours. Starting in 1969 this channel seal...

Buy

$2.75
Frequently
Purchased With

Item #: 42185 [More info]
[More info] Bumpers - Fender To Hood - Set of 4 - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Four per car, mounts to fenders. Replaces Ford part #C6OZ-16758.

Buy

$2.88
Frequently
Purchased With

Item #: 33053 [More info]
[More info] Moulding / Trim Set - Wheel Lip - Set of 4 - Repro ~ 1969 - 1970 Mercury Cougar
Set of 4 reproduction wheel lip mouldings for the 69-70 Cougar. These are spot on and we had no problem fitting them on our cars, the only difference we noticed is that the aluminum is softer than the originals and...

Buy

$203.85
Frequently
Purchased With

Item #: 26624 [More info]
[More info] Bumpers - Door - EACH - Repro ~ 1969 - 1973 Mercury Cougar / 1969 - 1973 Ford Mustang
Sold individually, four required per car. Replaces Ford part #: C7AZ-5426528.

Buy

$0.85
Frequently
Purchased With

Item #: 26635 [More info]
[More info] Bumper - Glove Box Door - Pair - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Sold as a pair. Two required per car.Replaces Ford Part #: 380239.

Buy

$0.85
Frequently
Purchased With

Item #: 26646 [More info]
[More info] Bumper - Taillight To Fuel Door - Repro ~ 1969 - 1970 Mercury Cougar
Rubber bumper used on 69-70 taillight housings to cushion the closing of the fuel door, sold individually, two required per car. Replaces Ford Part #: 16758.

Buy

$0.85
Frequently
Purchased With

Item #: 27040 [More info]
[More info] Side View Mirror - Sport - Passenger Side - Manual - XR7 - Chrome Base - Repro ~ 1969 Mercury Cougar
Reproduction manually operated passenger side (right hand) sport mirror with a chrome base for the Mercury Cougar XR7. The XR7, Sports Special, and Eliminator never came with a passenger side (right hand) mirror...

Buy

$225.00
Frequently
Purchased With

Item #: 26457 [More info]
[More info] Grille Headlight Eyelid Door - Foil Insert - Passenger Side - Repro ~ 1969 Mercury Cougar
New adhesive backed foil insert that goes behind the walking cat on the passenger side headlight eyelid door on the 1969 Mercury Cougar. You will likely want to purchase the reproduction walking cat when...

Buy

$18.95

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

69 Rocker