Rocker Panel Mouldings

Here is a time and money saving package deal for the person restoring their 1969 Cougar. This package includes: Hood lip moulding Fender extension mouldings Deck lid moulding Drip rail mouldings Nine piece front and rear window trim Front and rear Award Winning Bumpers Keep in mind we will often give extra core value trade in for items we may be low on. Please call before sending extra parts for trade value. All parts are show quality. The bumpers are triple plated chrome, the aluminum has the...

Correct plastic rocker moulding clips with Ford engineering # C9WB-6510182-A, Ford part #C9WY-6510182-A. There are five of these on each side for a total of ten per car. These same clips can be found on 1977-1979 Mercury Cougars and Thunderbirds. Most likely they were used on other FoMoCo products. If you know of other applications where these clips can be found let us know so we can post the information to help others in their search. Sold Individually.

Sold as a set of twelve (two more than required), replaces Ford part #C9WY-6510182-A. From the factory there were five of these on each side for a total of ten per car. These same clips were also used on 1977-1979 Mercury Cougars and Thunderbirds. Most likely they were used on other FoMoCo products.Fits: 1969 Mercury Cougar1970 Mercury Cougar

This kit includes all hardware needed for attaching the scoops to the rocker panels on the sport special rocker mouldings. Includes all screws and studs to attach the scoops to the end of the rockers, and to attach everything to the the vehicle.

Used driver side (left hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small...

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference in the contour on the ends of this piece that differentiates driver and passenger side. These will not work on a 1970 as the rear wheel opening was increased in size for the 1970 model year. These 1969 mouldings are about 79-1/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small dings and scrapes....

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple...

Complete kit with 12 white plastic mounting clips, 2 black plastic mounting brackets that attach rocker mouldings to scoops, 2 aluminum rocker mouldings and 2 chrome plated scoops.  Due to supplier shortage, the metal rocker panel clips are not available at this time. Click Here to View Installation Instructions   These are correct for 1969 only but can be used on any year 1967-1973                   ...

Sold as a pair, replacement aluminum rocker mouldings with no scoops.

Used driver side (left hand) Sport Special rocker panel moulding / trim for the Mercury Cougar. These only came on the midyear 1969 Sport Special Cougars, but have been popular with all 1967 - 1970 Cougar owners for years now. We regret not being able to come up with anything better than these "driver quality" units shown here. Notice the two small extra screw holes. These are very costly to have restored so be aware this is an expensive endeavor should you go that route. To learn more...

Used passenger side (right hand) Sport Special rocker panel moulding / trim for the Mercury Cougar. These only came on the midyear 1969 Sport Special Cougars, but have been popular with all 1967 - 1970 Cougar owners for years now. We regret not being able to come up with anything better than these "driver quality" units shown here. Notice the two small extra screw holes. These are very costly to have restored so be aware this is an expensive endeavor should you go that route. To learn...

New item as of February 2021! We've found that these rocker panels can't be used with the original clips, you can find the reproduction mounting hardware kit here. These anodized bright dip mouldings are much closer to the original design than our Premium Stainless mouldings. They are side specific (The more rounded edge mounts towards the rear and the flatter edge mounts towards the front) and will not fit on a 1970 model (due to the increased size of the wheel opening) unless...

Driver side used, 1969 Sport Special rocker moulding retainer.  This black plastic part mates the scoop to the aluminum mouldings. Ford part numbers C9WB-65101B63-A. Fits: 1969 Mercury Cougar Sport Special

Passenger side used, 1969 Sport Special rocker moulding retainer.  This black plastic part mates the scoop to the aluminum mouldings. Ford part numbers C9WB-65101B62-A. Fits: 1969 Mercury Cougar Sport Special

Sold as a pair. These black plastic parts mate the scoops the aluminum mouldings. Ford part numbers C9WB-65101B62-A and C9WB-65101B63-A Fits: 1969 Mercury Cougar Sport Special

Restored decorative driver side sport special rocker panel scoops for the 1969 Mercury Cougar. To be eligible for the core charge refund, you must send in pitt free cores.

Restored decorative passenger side sport special rocker panel scoops for the 1969 Mercury Cougar. To be eligible for the core charge refund, you must send in pitt free cores.

Reproduction decorative sport special rocker panel scoops for the 1969 Mercury Cougar.Sold as a pair.

Restored decorative sport special rocker panel scoops for the 1969 Mercury Cougar. To be eligible for the core charge refund, you must send in pitt free cores. Sold as a pair.

Here is a time and money saving package deal for the person restoring their 1970 Cougar. This package includes: Hood lip mouldings Fender extension mouldings Deck lid moulding Drip rail mouldings (specify w/ or without vinyl top) Nine piece front and rear window trim Front and rear Award Winning Bumpers Keep in mind we will often give extra core value trade in for items we may be low on. Please call before sending extra parts for trade value. All parts are show quality. The bumpers are triple...

Reproduction rocker moulding / trim end clip for the Mercury Cougar. This clip is a steel clip with a wire like the original. These units are technically for the 1969 and 1970 Cougar, but they will also work well with the 1968 rocker moulding / trim. Four of these clips were used on all 1969 Cougars except for the Sport Special which used two. The 1970 Cougar also uses two per car. Sold individually.Will work on 71-3 with modification. ...

Ford part number C9WY-6510198-A. This is the metal rocker moulding clip that attaches the front and rear of the mouldings to the car in 1969 (except the Sport Special which only has them on the rear). In 1970 a Phillips screw held the rear end of the rocker moulding to the quarter panel on each side so just the fronts of the mouldings used these clips in 1970. Keep in mind that this same basic clip can be found on 1977-1979 Mercury Cougars and Ford Thunderbirds that were equipped with optional...

Ford part number C9WY-6510198-A. This is the metal rocker moulding clip that attaches the front and rear of the mouldings to the car in 1969 (except the Sport Special which only has them on the rear). In 1970 a Phillips screw held the rear end of the rocker moulding to the quarter panel on each side so just the fronts of the mouldings used these clips in 1970. Keep in mind that this same basic clip can be found on 1977-1979 Mercury Cougars and Ford Thunderbirds that were equipped with optional...

Correct plastic rocker moulding clips with Ford engineering # C9WB-6510182-A, Ford part #C9WY-6510182-A. There are five of these on each side for a total of ten per car.Fits: 1969 Mercury Cougar1970 Mercury Cougar

Kit comes with 4 metal clips, Ford part number C9WY-6510198-A and 10 plastic clips, Ford part number C9WY-6510182-A. Pictured is a complete set of 1969 rocker moulding clips. The 1969 Sports Special and the 1970 uses the same kit minus two metal end clips, if you have a 69 Sports Special or 1970 model please select that option so as to save $25.00. The 1970 aluminum rocker moulding is held by a Phillips screw on the back thus the need for front clips only. It is rare for us to get a set like...

Kit comes with 4 metal clips, Ford part number C9WY-6510198-A and 10 plastic clips, Ford part number C9WY-6510182-A. Pictured is a complete set of 1969 rocker moulding clips. The 1969 Sports Special and the 1970 uses the same kit minus two metal end clips, if you have a 69 Sports Special or 1970 model please select that option so as to save $25.00. The 1970 aluminum rocker moulding is held by a Phillips screw on the back thus the need for front clips only. It is rare for us to get a set like...

Clean cores are required for this service, cores that are turned in for this service that are kinked, heavily pitted or mouldings with several holes drilled into them are not worth restoring. That being said, often all of the gravel pitting usually found at the front cannot completely be removed as it would result in a product that will be too thin. Keep in mind that because these are restored mouldings, they will not have the black strips in place and will need to be painted on."...Don -...

Clean cores are required for this service, cores that are turned in for this service that are kinked, heavily pitted or mouldings with several holes drilled into them are not worth restoring. That being said, often all of the gravel pitting usually found at the front cannot completely be removed as it would result in a product that will be too thin.

Used driver side (left hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference in the contour on the ends of this piece that differentiates driver and passenger side. These will not work on a 1970 as the rear wheel opening was increased in size for the 1970 model year. These 1969 mouldings are about 79-1/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small dings and scrapes. Driver...

Excellent condition NOS rocker panel mouldings. These are original Ford parts made on original equipment back in the day. Sold as a pair, no hardware. Items sold will be better than the ones pictured. The rounded edges on these mouldings go towards the rear, and the flat edge goes towards the front of the car. ...