Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-144 of 531
Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30985 -

Used diffuser for the shift indicator lamp. This diffuser is used on the Cougar or Mustang WITHOUT a console and attaches to the end of the light socket on your shift indicator wire harness. Both shift indicator lamps with or without a console used the same wire harness and socket, but used different diffusers. The only difference in the harness from the 67 to the 68 was different colored wires.

Price: $45.86

Buy Details

Availability: In-Stock Item
Item #: 12826 -

This restored trim piece mounts to the back of the vent frame of any 1967-68 Mercury Cougar or Ford Mustang. Driver side only, made of galvanized steel. Full part name by Ford is: Retainer, vent window division bar glass run. The felt inserts will generally not be serviceable. See also C7ZZ-21547-A.Check out our video below for helpful tips on disassembling your vent and quarter windows: ...

Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12110 -

Used door / lid for the glove box in the 1967 Mercury Cougar or Ford Mustang. This unit is just the bare door / lid and does not come with the hinge, liner, lock or lock bezel. We have found this door on 1967 and into 1968 Cougars. Sometime in early 1968 this glove box door came with three holes on the back. Both glove box doors fully interchange. Bead blasted for the photo, door ships without rust, in most cases you will want to paint prior to installation.Ford part # C7ZZ-6506024-A.*NOTE*...

Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16183 -

Used door / lid for the glove box on any 1968 Mercury Cougar or Ford Mustang. This unit is just the bare door / lid and does not come with the hinge, liner, lock or lock bezel. We have found this design of door with the 3 holes, well into the 1968 production run. 1967 and early 1968 doors are typically without the three holes on the back. Both glove box doors fully interchange. Bead blasted for the photo, door ships without rust, in most cases you will want to paint prior to installation.Ford...

Price: $16.05

Buy Details

Availability: In-Stock Item
Item #: 13867 -

High quality reproduction. Fits as good as it looks! You can click this image for a magnified view. Replaces Ford Part # C7ZZ-6522600-A or C5ZZ-6522600-C.

Price: $3.85

Buy Details

Availability: In-Stock Item
Item #: 13888 -

The same plastic lock rod grommet but with a nice chrome finish for an extra touch. Sold in pairs. Replaces Ford Part #: C5DZ-6221999-B or C5DZ-6221999-C.

Price: $1.54

Buy Details

Availability: In-Stock Item
Item #: 18983 -

Good Reproduction of the clear plastic door lock grommets. Sold as a pair. Replaces Ford Part #: C5DZ-6221999-B.

Price: $49.85

Buy Details

Availability: In-Stock Item
Item #: 33106 -

Plastic injection molded, chrome plated just like the originals. Sold as a pair. Replaces Ford part number C5DZ-6221850-A

Price: $3.47

Buy Details

Availability: In-Stock Item
Item #: 26211 -

Plastic injection molded, chrome plated just like the originals. Sold as a pair. Replaces Ford part number C5DZ-6221850-A

Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 41737 -

Made for Mustang but can be tweaked to work on Cougar. We advise you buy our good used rods. Replaces Ford part # C7ZZ-65213452.

Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0360 -

Good original driver side door latch rod set. Includes rod for inside lock, outside key lock, and outside door release actuating rod. These are good used parts and are a better quality and value compared to the reproductions. Only fits passenger side doors of 1967 Mercury Cougar and Ford Mustang. 1967 door latches are unique, they have a short tab for the inside door lock knob typically. Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers shown...

Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 41738 -

Made for Mustang but can be tweaked to work on Cougar. We advise you buy our good used rods.

Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0361 -

Good original passenger side door latch rod set. Includes rod for inside lock, outside key lock, and outside door release actuating rod. These are good used parts and are a better quality and value compared to the reproductions. Only fits passenger side doors of 1967 Mercury Cougar and Ford Mustang. 1967 door latches are unique, they have a short tab for the inside door lock knob typically. Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers...

Price: $44.55

Buy Details

Availability: In-Stock Item
Item #: 14034 -

These are so nice... The texture is exact, the rubber feel is right, the fit is perfect, the colors are correct "except aqua which is a darker than Cougar, Mustang color". These used to be very hard to find in good used condition, why bother with used when you can get them at this price. Sold as a pair.Replaces Ford Part # C8ZZ-6526656. *Customer Feedback* Don and staff; Just to let you gentlemen know that I have received the 1967 XR7 saddle tan door panels you sent and I am extremely happy...

Price: $37.35

Buy Details

Availability: In-Stock Item
Item #: 42043 -

These are so nice... The texture is exact, the rubber feel is right, the fit is perfect, the colors are correct "except aqua which is a darker than Cougar, Mustang color". These used to be very hard to find in good used condition, why bother with used when you can get them at this price. Sold as a pair Replaces Ford part # C8ZZ-6526656.

MSRP:$7.99
Price: $7.88

Buy Details

Availability: In-Stock Item
Item #: 13-0003 -

New, more accurate woodgrain as of 2019! These decals are cut to fit the 1967 door pull end caps. The 1968 end caps had a smaller woodgrain insert with a black border. We also sell a slightly smaller version of this kit for the 1968 owners. This kit also fits the reproduction end cap kit. Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts! ...

Price: $18.15

Buy Details

Availability: In-Stock Item
Item #: 25919 -

Fits both left or right, sold individually. These have a higher degree of luster than the originals but are made of same material and weigh exactly the same as our NOS examples. Very little difference from our more expensive version which is made using original tooling. Ford Logo sold separate, sold individually, two required per car. Replaces Ford part # C5ZZ-6513208-B or C5ZZ-6513208-D.

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23884 -

Decent, used, driver quality part that will have scratches and dings consistent with a Cougar that has been on the road for decades. Even if we look through our pile and find the best we have it still will show wear, expect it to look just as ugly as the one pictured. Sold individually.

Price: $107.45

Buy Details

Availability: In-Stock Item
Item #: 11379 -

New Supplier Now Available! *Unlike our other sill plates, these are sold as a pair* Ford never made these in stainless but what a great upgrade! The advantage we see with these is that they do not dent or scratch as easy when you release your seat belt. They also can be polished easily (unlike anodized aluminum). These weigh 1.5 pounds each, triple of what the originals weigh. Sold as a pair only. *NOTE* There are two suppliers on these and we now carry only the Dynacorn...

Price: $158.55

Buy Details

Availability: In-Stock Item
Item #: 13989 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. Not correct for 1967 but works as a functional substitute. This vacuum reservoir mounts under the battery tray for factory tilt swing away steering columns found in the Mercury Cougar or Ford Mustang / Thunderbird. Note that some 1968 Mustangs (without air) mount this tank on the passenger side rear apron. This is a double nipple tank, we also sell the single nipple tank for the...

Price: $101.85

Buy Details

Availability: In-Stock Item
Item #: 12283 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. Reproduction vacuum reservoir for the tilt / tilt away steering column equipped Mercury Cougar or Ford Mustang. This is a 1967 only design that didn't have mounting bolts on top like the later versions, they used a side mounting bracket.NOTE: You will need to use the mounting bracket from your old can, these reproductions do not come with one. *NOTE* WCCC services all FoMoCo tilt...

Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0042 -

Mates vacuum nipple on white plastic vacuum motor to ninety degree metal elbow.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

MSRP:$1.95
Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 26104 -

This is the aluminum emblem which mounts on the center of all scuff plates. Features raised script surrounded by "Product Of Ford" like original, adhesive backed and protective coating. Sold individually, two required per car. Replaces Ford part # C8ZZ-6513208-T. Technically this is the version found on 1967 cars, the 1968 versions had a larger blue oval 'Ford', and did not have the 'Product of' line.

Price: $13.25

Buy Details

Availability: In-Stock Item
Item #: 26089 -

Easy screw in replacement with correct chrome finish. Made in chrome die-cast, originals were plastic. The tilt column switch uses a deeper stem. Replaces Ford Part #: C7OZ-17513-A

Price: $68.85

Buy Details

Availability: Out of Stock
Item #: 32762 -

New old stock Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a mercury  switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

Price: $41.85

Buy Details

Availability: In-Stock Item
Item #: 14370 -

After-market exact reproduction of the original Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a gravity switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

Price: $32.25

Buy Details

Availability: In-Stock Item
Item #: 21-4000 -

Bonding adhesive for plastic dash repair. Keep in mind that this adhesive has an extremely fast setting time. We also have the slow setting adhesive here.

Price: $28.65

Buy Details

Availability: In-Stock Item
Item #: 21-4001 -

Epoxy adhesive for plastic dash repair. This is the slow setting version of this adhesive. It's also available in fast set, which you can get here.

Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 10598 -

This white plastic spacer fits into the back of the right hand inner knob on cars without factory fader or balance. If your inner knob is loose and will not align, you will want to see if this part is in place. 1968-70 AM-FM radios would not utilize this part because they have a balance feature. 1967 AM-FM radios would use this part as they did not have a balance feature. Called a "Sleeve" 1969-70 Cougar and Mustang AM radios use this sleeve. Also found on various 1970-76 Ford and Mercury cars...

Price: $63.85

Buy Details

Availability: Rare / NOS Part
Item #: 32715 -

Rare option that makes your inner right hand radio knob work as fader. Very limited supply, guaranteed to work. New Old Stock switch. Ford part number C7AZ-18972-A and C7AA-18972-A on the wiring tag. NOS

Price: $36.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24327 -

Rare option that makes your inner right hand radio knob work as fader. Very limited supply, guaranteed to work.

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 27593 -

New improved set of 6 screw for the glove compartment hinge on all 1967-68 Mercury Cougar and Ford Mustangs. Three 10-24 bolts with 0.72" conical washer heads to go into dash, and three 10-24 bolts with 0.50" conical washer heads to attach to glove box door. This is an updated proper kit for 1967-68 Mercury Cougar and Ford Mustang glove box door hinge. All AMK bolts, but WCCC special recipe. 6 pieces as shown.

Price: $238.35

Buy Details

Availability: In-Stock Item
Item #: 12863 -

"Premium" firewall pad for your 67 - 68 Cougar or Mustang. It's "premium" in the sense that it's more expensive. The main difference between this and the "economy" version is that it has a layer of foil inside, which helps with heat insulation. However, the total thickness is actually a little less than the economy version. This may make it easier to install, along with the included hard plastic clips (unlike the rubber originals). Given the significant difference in price for negligible...

MSRP:$191.10
Price: $142.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 14924 -

These quality mats are made in the USA by Auto Custom Carpets. They are a good fit with an aggressive grip rubber backing. These are heavy mats that will not easily slip out of place or become "wadded up" under your brake pedal. They will hold their form for many years and do more than just enhance the look of your Cougar, they will provide an extra layer of insulation providing an added barrier for heat and sound. Very nice carpet floor mats that make for an ideal gift for that Cougar lover...

Price: $1.75

Buy Details

Availability: In-Stock Item
Item #: 26665 -

Windshield Washer Pump Pedal Pad for 1967-1968 Mustang & Cougar. Keep your foot from sliding off the pedal with this Injection-molded rubber pad with vertical grooves just like original. This pad was used on models with a floor mounted washer pump pedal. (7664A) This is almost always missing off of the end of your foot operated washer pump. Replaces Ford part number C7ZZ-17664-A. We also have good used pumps in stock. Thanks for the plug Mark!: My first deal with Don was clear back in the...

Price: $242.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18949 -

Very clean, original condition. Same as Cougar but you would have to bore holes in it for the top pad to use on the 1967 standard or 1967 - 1968 XR7 Cougar.

Price: $421.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19016 -

Core bench seat for the 1967 Mercury Cougar or Ford Mustang equipped with decor interior. The foam almost will always be deteriorating or even missing. All seat cores will be solid frames taken from a Western parts car. Seat tracks are sold separate.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41226 -

This is actually the correct 2 inch screw for the 1968, as opposed to the 1 3/4 inch screw that would have come in the 67. With the added length this screw is less likely to pull out of the firewall than the 67 screw was. Fits Standard and XR7. Sold individually.

Price: $9.55

Buy Details

Availability: In-Stock Item
Item #: 12995 -

Early 1967 style glove box catch. Fits all 1967-68 Cougars and 1966-68 Mustangs.Replaces Ford part number C6OZ-6206064-A.

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19555 -

Used glove box catch for any 1967-68 Mercury Cougar or Ford Mustang. Several versions of this catch were used 1967-68, this is the most common version. Replaces Ford part number C6OZ-6206064-A.

Price: $43.65

Buy Details

Availability: In-Stock Item
Item #: 41945 -

Fits either 1967 or 1968 Mercury Cougar or Ford Mustang. Technically this is a copy of the 1967 factory installed version. 1968 factory glove box liners have a smooth section for installing the tire pressure decal. See the related items for 1967 and 1968 good used liners. Replaces Ford part #: C7ZZ-6506010-A.

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 17778 -

Used glove box liner or plastic box for any 1967 Mercury Cougar or Ford Mustang. This is the same as the Scott Drake reproduction, but it lacks the smooth section for the tire pressure decal which was introduced on the 1968 cars. Used part with no cracks or heavy scratches. Inside clip usually has light rust. 1967 and 1968 glove box liners fully interchange, Replaces Ford part number C7ZB-6506010-A.

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18936 -

Used glove box liner or plastic box for any 1968 Mercury Cougar or Ford Mustang these do have the flat smooth area for installing the tire pressure decal. This is nearly the same as the 1967 used and Scott Drake reproduction, which lack the smooth section for the tire pressure decal. Good used part with no cracks or heavy scratches. Inside clip usually has light rust. 1967 and 1968 glove box liners fully interchange.Replaces Ford part number C8ZB-6506010-A.

Price: $30.15

Buy Details

Availability: In-Stock Item
Item #: 41524 -

A great optional accessory. All new tooling was created to produce these glove box latches. Includes 2 matching keys. Fits any 1967-68 Mercury Cougar or Ford Mustang.Replace Ford Part #: C6DZ-6506072.Technically the lock style is for 1968, notice the push button with rounded edges? 1967 push buttons had square edges.

Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0357 -

A great optional accessory. All original glove box latches. Includes 2 matching keys. Fits any 1967-68 Mercury Cougar or Ford Mustang.Technically the lock style is for 1967, notice the push button with square edge? 1968 push buttons had rounded edges. See related for reproduction and 1968 used.