All Products

The 1967 XR7 did not have rocker panel mouldings as did the 1968 - 1973 XR7 Cougars. All 1967 XR7 models came equipped with these "Hash" marks fastened to the rear of both rockers, at a rear tilting angle. Both sides received seven ribs, held by two Phillips screws each for a total of fourteen ribs in all. They were painted semi-gloss black in the recessed areas and the screws themselves were black as well. The leading ribs are usually pretty rough looking due to road debris wear, the one...

Reproduction emergency / parking brake cable return spring that goes underneath the car for the Mercury Cougar or Ford Mustang.

Reproduction emergency / parking brake cable return spring for the Mercury Cougar or Ford Mustang. This unit goes underneath the dash of the car and is a part of the emergency / parking brake assembly. Made from the original blue prints to the exact specifications of the originals.Original Ford specs according to the master parts catalog was: 11 1/8" long - 55 CoilsFord Part #: D1ZZ-2A651-A or D1ZZ-2651

There are multiple emissions decals available for the 351 Cleveland 2 barrel with an automatic transmission in 1970 for the Mercury Cougar or Ford Mustang. This sticker is printed with part number D0AE-9G485-S.

There are multiple emissions decals available for the 351 Cleveland 2 barrel with an automatic or manual transmission in 1970 for the Mercury Cougar and Ford Mustang.  This sticker is printed with part number D0AE-9C485-A.

Emission Decal for the 351 Cleveland 2 Barrel with an automatic or manual transmission in the 1970 Mercury Cougar or Ford Mustang. Printed with part number D0AE-9C485-AH.

Vehicle Emission Control Information Decal for the 351 Cleveland with a 2 barrel carburetor and an automatic transmission or a manual transmission in the 1972 Mercury Cougar and 1972 Ford Mustang. Printed with part number D2AE-9C485-HA.

Emission decal for the 351 Cleveland 4 barrel with an automatic transmission in the 1970 Mercury Cougar or 1970 Ford Mustang manufactured before January 1, 1970.  Printed with part number D0AE-9C485-F.

Yellow Vehicle Emission Control Information Decal for the 351 Cleveland with a 4 barrel carburetor and an automatic transmission in the 1972 Mercury Cougar and 1972 Ford Mustang early production. Printed with part number D2OE-9C485-BD.

Orange Vehicle Emission Control Information Decal for the 351 Cleveland with a 4 barrel carburetor and an automatic transmission in the 1972 Mercury Cougar and 1972 Ford Mustang late production. Printed with part number D2OE-9C485-BD.

Reproduction 351 2V AT / MT Emission Decal for the 1971 Mercury Cougar / Ford Mustang

Emissions decal for the 351 Cleveland 4 barrel with automatic or manual transmission on the 1970 Mercury Cougar and Ford Mustang manufactured after January 1, 1970. Printed with part number D0AE-9C485-AG.

Emission Decal for the 428 4 barrel with an automatic or manual transmission in the 1970 Mercury Cougar and Ford Mustang. Printed with part number D0OE-9C485-J.

Exhaust Emission Control decal for the BOSS 302 with a manual transmission in the 1970 Mercury Cougar and Ford Mustang manufactured after January 1, 1970. Printed with part number D0ZE-9C485-F.

Exhaust Emission Control decal for the BOSS 302 with a manual transmission in the 1970 Mercury Cougar and Ford Mustang manufactured before January 1, 1970. Printed with part number D0ZE-9C485-B.

Angled bracket for mounting the steel dash panel to the cowl. Two brackets per car, sold individually. These are the end mounting brackets for all 1969-70 Mercury Cougar and Ford Mustangs with or with air condtioning. Ford part number C9ZB-5404366.

Engine Code Decal for the 302 with automatic transmission and air conditioning on the 1970 Ford Mustang. Printed with L 6° K272AG.

Engine Code Decal for the 302 with a automatic transmission on the 1970 Ford Mustang.  Printed with L 6° K280A.

Engine Code Decal for the 302 with a manual transmission on the 1970 Ford Mustang. Printed with L 6° K279A.

Engine code decal for the 351 Cleveland with a 2 barrel carborator on the 1970 Mercury Cougar and Ford Mustang manufactured after January 1, 1070. Printed with L 10° K834 K.

Engine Code Decal for the BOSS 302 with a Drag Pac on the 1970 Mercury Cougar and 1970 Ford Mustang. Printed with L 16° 300S.

Engine Code Decal for the Boss 302 without the Drag Pac option on the 1970 Mercury Cougar and 1970 Ford Mustang. Printed with L 16° 299 D.

# 56350-S

Bolt that attaches engine mount to block. 4 bolts per engine, used on all v8 engines Mercury Cougar and Ford Mustang 1967-68. Sold individually.Ford number 304668-S2

After being obsolete for years we have brought back another hard to find clutch equalizer component for 1971-3 Mustang and Cougar. Numerous other Ford application too. Replaces Ford part # C5AZ-7B545-A

New 1-1/4 inch expansion plug. Expansion plugs were used as dust covers on the wide bearing style air conditioning pulleys commonly used on Ford cars 1965-68. These are not a real tight fit in those pulleys. Best to still install to keep dust out, we recommend using a bit of JB Weld to hold them.

Reproduction course threaded eye bolt for the leaf springs on the 1967 Mercury Cougar or Ford Mustang.Sold individually

This white plastic spacer fits into the back of the right hand inner knob on cars without factory fader or balance. If your inner knob is loose and will not align, you will want to see if this part is in place. 1968-70 AM-FM radios would not utilize this part because they have a balance feature. 1967 AM-FM radios would use this part as they did not have a balance feature. Called a "Sleeve" 1969-70 Cougar and Mustang AM radios use this sleeve. Also found on various 1970-76 Ford and Mercury cars...

Reproduction concours correct fasteners and clips for attaching the fan shroud to the radiator on 1967 Mercury Cougar and Ford Mustang with original style radiators and fan shrouds. 

Fan shroud installation kit for 67 - 71 Cougars and Mustangs. Will fit 1971 Cobra Jet shrouds.

Fan shroud hardware kit for the 302 or 351 on the 1971, 1972 or 1973 Cougar and Mustang.

Holds insulation to the firewall. Sold individually, 6 per car. Replaces Ford part # C8ZZ-6501691.

Self threading white plastic. Used on front and rear valances.Sold individually.

Contains nut and washer. Fits all Ford alternators. AMK F-644.

Fits 1967 and 1968 Standard or XR7

Reproduction Fender Extension Stud & Nut Kit for the 67 - 69 Cougar or Mustang

Fits Standard and XR7 Sold as a Kit as Pictured.

New improved set of 6 screw for the glove compartment hinge on all 1967-68 Mercury Cougar and Ford Mustangs. Three 10-24 bolts with 0.72" conical washer heads to go into dash, and three 10-24 bolts with 0.50" conical washer heads to attach to glove box door. This is an updated proper kit for 1967-68 Mercury Cougar and Ford Mustang glove box door hinge. All AMK bolts, but WCCC special recipe. 6 pieces as shown.

Fits standard and XR7 Sold as a Kit as Pictured. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Reproduction mounting kit for the center grill for the Mercury Cougar. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

This reproduction hood latch and catch screw and U nut kit fits both the Standard and XR7 and is sold as a kit as pictured.

This reproduction hood latch vertical support screw and U nut kit fits both the Standard and XR7 and is s sold as a kit as pictured.

This is a Mustang kit and it includes 4 screws, 2 metal nuts, 2 self-threading plastic nuts and 2 anti-rattle bumpers as pictured.For Cougar, you need this kit plus 2 more plastic nuts, found here.

Fits Standard and XR7

Correct Fit and finish for 1967, and works for 1968. Connects the overhead roof console to the mounting bracket. The only difference between the 67 and 68 kits are that the 67 screws are chrome and the 68 are zinc. The zinc will discolor over time, so we suggest using the 67 kit on a 68. Replaces Ford Part #: 519A58

Fits 1967 and 1968 Standard or XR7

This kit includes all hardware needed for attaching the scoops to the rocker panels on the sport special rocker mouldings. Includes all screws and studs to attach the scoops to the end of the rockers, and to attach everything to the the vehicle.

This kit connects the Overhead Console mounting bracket to the roof. Screw heads and clips differ slightly between 67 and 68. Replaces Ford Part #: 519B24, 519B38, 519B46