Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1489-1536 of 1684
$0 Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 11961 -

Reproduction dark red rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 11963 -

Reproduction light blue rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 10099 -

Reproduction medium blue rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed.*NOTE* There are two types of this trim found in the 1967-68, the smooth or rough texture. ...

$0 Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 11967 -

Reproduction saddle rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 11969 -

Reproduction white rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 13869 -

This is actually not correct for a 1968 but it is all that is available in reproduction. The 1968 front is actually the same 4 1/4" length as the rear. Many people prefer the longer version as it makes it easier to roll up. We do have good used 1968 front cranks for those who prefer to stay with original. The portion that attaches to the splined shaft on the window regulator protrudes from the back 3/16" (as shown on the left in the comparison picture) and will not clear the 71-73 door panels...

$0 Price: $6.35

Buy Details

Availability: In-Stock Item
Item #: 41434 -

This handle is a good replacement for the window cranks found on the 1971 - 1972 Cougar both front and back. The originals were 4 1/4" total length and this replacement handle is 4 7/8" long. The important detail on these is the fact that the female portion that attaches to the splined window regulator protrudes from the back 5/16". If you are using our chrome backing plates on your 69 -70, then this is the crank you will need to provide the correct clearance.Used before 10/71,...

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24514 -

This is a good used original rear window crank with no obvious scratches or pitting. May or may not come with random colored knob. It most likely will be missing the decal but will have the original set screw. Ford part number is C8ZZ-6530322-A, casting number shown on back is C8ZB-6530323-A. Black knobs are the most commonly ones requested, plan on buying new knobs if you need black.

$0 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 13896 -

Easy to install quality reproduction. Sorry, aqua is not available at this time. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a...

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 13902 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

$0 Price: $6.17

Buy Details

Availability: In-Stock Item
Item #: 13903 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part #C8AZ-6223352-GR *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small...

$0 Price: $9.05

Buy Details

Availability: In-Stock Item
Item #: 13904 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

$0 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 13900 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 13899 -

Easy to install quality reproduction. Sorry, aqua is not available at this time. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a...

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 13901 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

$0 Price: $1.50

Buy Details

Availability: In-Stock Item
Item #: 26102 -

Protects door panels from the abrasive action of rotating handles. Made from a very hard nylon type material featuring the correct milky white color. Replaces Ford Part Number #C8AZ-6223370-ADiameter 1-1/2"

$0 Price: $0.95

Buy Details

Availability: In-Stock Item
Item #: 26205 -

These inserts snap into your window elevators, four per elevator, eight per door for a total of 16 per car. Often the originals are worn down from lack of lubrication which will cause your door glass to rattle. The originals were more of a clear plastic, these are white in color. These do not fit quite as well as the originals, but work as long as you are OK with the slight play.  For a tighter fit, we recommend that you see the customer reviews of this product for suggestions that...

$0 Price: $4.86

Buy Details

Availability: Out of Stock
Item #: 11-0217 -

These inserts snap into your window elevators, four per elevator, eight per door for a total of 16 per car. This is a used part, and they will typically have a very small depression from wear. They can be installed 180° and be good again. Replaces Ford part # C9ZZ-6521496. Reproduction inserts are available.Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy...

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0178 -

23318 This is the door window counterbalance spring that goes on the window regulator of a 1967-68 Mercury Cougar or Ford Mustang. Obsolete in the Master Parts Catalog

$0 Price: $8.87

Buy Details

Availability: In-Stock Item
Item #: 26183 -

This is the bracket on which the windshield washer bag hang on the 1967 Mercury Cougar.  According to Phil Parcells

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26140 -

Injection molded high strength plastic connector for hoses leading to nozzles. Factory fit.Replaces Ford Part #: C7SZ-17A601-A or C0AB-17A601-A.Will not fit 69-70 with factory hoses as they used Ford part # C8OZ-17A601-A

$0 Price: $1.55

Buy Details

Availability: In-Stock Item
Item #: 26200 -

Injection molded high strength plastic connector for hoses leading to nozzles.Correct squared press-in fitting

$0 Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 26644 -

This Wiper Pivot To Cowl Seal Reproduction is sold as a pair. Fits both the 67 and 68. Replaces Ford part #: C5ZZ-17475.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10654 -

Reproduction wing nut for the snorkel on your air cleaner. Good for the 1967 Cougar or Mustang.

$0 Price: $8.85

Buy Details

Availability: In-Stock Item
Item #: 26212 -

Correct spare tire hold down wing nut for the 1967 Mercury Cougar or Ford Mustang. Replaces Ford Part #: B9AZ-1462-A.

$0 Price: $7.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24359 -

For 1968 Ford standardized or changed all of the J-bolt threads to the beefier 1/2"-13. We have noted two variations of this wing nut. The most obvious identifier between the two is the tabs in the center. The majority have these tabs present, the minority do not. We also stock and carry the correct disc or hold down plate, and the J bolt. Lots of sizes and lengths for those. Do you have the correct one?

$0 Price: $6.21

Buy Details

Availability: In-Stock Item
Item #: 10097 -

This is the set of six bolts needed to attach the pivot section of the wiper arms to the cowl on 1969-1970 Cougars and Mustangs. Three bolts needed per side

$0 Price: $7.65

Buy Details

Availability: In-Stock Item
Item #: 11771 -

Anti rattle spring for the 1967 Cougar and Mustang clutch release lever spring. Ford part number C6AZ-7562-A.

$0 Price: $7.56

Buy Details

Availability: In-Stock Item
Item #: 30694 -

Air Conditioning Clutch Feed Wire that runs along the driver side valve cover to the clutch on the compressor. About 24 inches in total length. Starting in 1969 the female plug was of the water proof variety. Black plugs on either end.

$0 Price: $9.86

Buy Details

Availability: In-Stock Item
Item #: 30695 -

Air Conditioning Clutch Feed Wire that runs along the driver side valve cover to the clutch on the compressor. About 24 inches in total length. Starting in 1969 the female plug was of the water proof variety. Black plugs on either end.

$0 Price: $4.37

Buy Details

Availability: Out of Stock
Item #: 27379 -

Small retaining ring that secures the engine gauge feed wiring harness to the driver side valve cover. Two were used per engine. We found this part in the 1971-72 Mustang Electrical Assembly Manual. To be used with original wiring harnesses, the reproduction engine gauge feed harness does not have the clips to attach to this retainer.Ford part number D2AB-14A163-MA.

$0 Price: $7.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0168 -

This Screw fastens the plastic guide for turn signal wires next to column under the cone by steering wheel.

$0 Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 32056 -

Used wiring pigtail that runs from the 14290 under hood harness to the passenger side headlight harness.

MSRP:$4.37
$4.37 Price: $3.99

Buy Details

Availability: In-Stock Item
Item #: 32101 -

New wiring pigtail with male bullet connector, and male / female paired connector. Also has rubber grommet that fits a 5/8" inch hole. Looks like 18 gauge wiring. These are remnants from the reproduction Mustang front turn signal lights that we convert to Cougar wiring. Brand new, approximately 13-15 inches in total length. Colors as shown.

$0 Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 30124 -

Reproduction wiring harness pigtail plug for the 67 - 68 Cougar or Mustang voltage regulator.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26855 -

Used taillight wiring harness repair plug and pigtail from the driver side (left hand) C pillar light to the plug at the 14405 harness and driver side door jamb. This is part of the 13A449 main taillight harness.Good for both STD and XR7 models.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no...

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26862 -

Used taillight wiring harness repair eyelet and pigtail that is the ground wire at the fuel filler for the Mercury Cougar. This is part of the 13A449 main taillight wiring harness.Good for both STD and XR7 models.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a...

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26853 -

Used taillight wiring harness repair eyelet and pigtail power lead from the circuit breaker to the taillights on the Mercury Cougar. This is part of the 13A449 main taillight wiring harness.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source...

$0 Price: $8.50

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32827 -

Used wiring harness that runs from the taillight harness to the emergency relay on the 67 - 68 Standard and XR7 model Cougars. 

$0 Price: $8.87

Buy Details

Availability: In-Stock Item
Item #: 32509 -

Used wiring pigtail that runs from the taillight harness to the ground at the fuel filler bracket on the 71 - 73 Cougar Standard or XR7 models.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26854 -

Used taillight wiring harness repair plug and pigtail to the passenger side (right hand) back-up light on the Mercury Cougar. This is part of the 13A449 main taillight wiring harness.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15772 -

Used taillight harness wiring repair pigtail from the K8 relay to the passenger side (right hand) door jamb for the 67 - 68 Mercury Cougar Standard / XR7

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15655 -

Used under dash wiring harness repair plug and pigtail for the console lights. This is part of the 14401 main under dash wiring harness.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15607 -

Used under dash wiring harness repair plug and pigtail for the driver side door to the door courtesy light. This is a black wire with a male plug at one end and is part of the 14401 main under dash wiring harness.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15753 -

Used under dash wiring harness repair plug and pigtail for the courtesy lights on the door or dash for the Mercury Cougar. The plug is the same for both left and right sides. This is part of the 14401 main under dash wiring harness.