Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1345-1392 of 1684
$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 42071 -

This reproduction emergency / parking brake spring for the V8 Mercury Cougar or Ford Mustang is made from original Ford blue prints. This is the oblong spring that is painted RED like the originals, rests upon the parking brake cross bar link between the shoes.These springs came from the factory in either Red or Yellow.You can find the Yellow spring here.Replaces Ford part # C2OZ-2601. ...

$0 Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 30866 -

This reproduction emergency / parking brake spring for the V8 Mercury Cougar or Ford Mustang is made from original Ford blue prints. This is the oblong spring that is painted YELLOW like the originals, rests upon the parking brake cross bar link between the shoes.These springs came from the factory in either Red or Yellow.You can find the Red spring here.Replaces Ford part # C2OZ-2601. ...

$0 Price: $1.67

Buy Details

Availability: In-Stock Item
Item #: 30865 -

This reproduction spring puts tension on the headlight adjusting ring so when you turn the screw on the adjusters the ring remains tight and will move as adjusted. Sold individually, four required per car. These small springs were used in 1967-68, a larger spring was used in 1969 through 1973.

$0 Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26147 -

This spring puts tension on the headlight adjusting ring so when you turn the screw on the adjusters the ring remains tight and will move as adjusted. Sold individually, four required per car. These small springs about 0.360" diameter, were used in 1967-68, a larger spring was used in 1969 through 1973, which will fit the early Cougar. Ford number C6SZ-13031-A.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23793 -

Better quality than our reproduction for less money. Ford part number C0DZ-13807-A.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20266 -

This spring has two functions. The first is to connect the rod that opens the latch to the deck lock cylinder. The second is to put tension on the cylinder so as to return the key to its perpendicular resting place after unlocking the deck lid. Check out this video

$0 Price: $7.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0110 -

Spring that fits into the steering column collar. Two springs in total that hold your key lock cylinder in place. Two required per car.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0109 -

Spring used to apply tension to the tilt locking pawl. 1967 thru 1969 required two springs due to the tilt away function. 1970 and later required only one spring.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41374 -

This gives the thumb release button in your T shaped shift handle its tension. If it is rusted then your button will not return back to its outer position easily. Fits 1967-73 Mercury Cougar and 1965-73 Ford Mustang. Technically this spring fits all Ford and Mercury floor shifters 1965-73. Ford part number C5ZZ-7C300-A. The MPC shows this spring to have a free length of 2-1/16 inches.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 15840 -

Replacement throttle pedal spring for your 71 - 73 Cougar or Mustang. Easy to replace, keeps correct tension on your gas pedal.

$0 Price: $5.91

Buy Details

Availability: In-Stock Item
Item #: 41549 -

Exact reproduction of the 1967-68 Mercury Cougar and 1966-68 Ford Mustang clutch release fork to equalizer spring. Upper clutch equalizer to firewall, 289 and 302 engines. This unit will also work for 1969-70 Cougar and has the correct spring hook orientation. 66 - 68 Ford specs: 3-1/16" Long 40 Coils 69 - 70 Ford specs: 3-1/8" Long 36 Coils Replaces Ford part #: C3DZ-7523.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 11796 -

This spring is commonly missing or broken. Plated to prevent rusting and premature failure. Connects from the top of the equalizer bar to the firewall. Close Reproduction. Slightly longer and softer than our concours spring. Replaces Ford Part #: C9ZZ-7523-A.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 41477 -

This is a non-concours upper clutch equalizer or Z-Bar to firewall spring that fits the 390 and 428 Cobra Jet in the 1969 - 1970 Mercury Cougar or the 1969 - 1970 Ford Mustang.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 42396 -

Z bar return spring for all 1967-68 Mercury Cougar and Ford Mustang. This is the upper spring, proper color and spring tension from original. This is the economy version of the concours spring above. Made in China.

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0161 -

22992 SPRING Tension spring for 1967-68 Mercury Cougar and Ford Mustang vent window pivot assembly. 1 per side.

$0 Price: $0.59

Buy Details

Availability: Out of Stock
Item #: 26513 -

This clip is the same as a door panel clip with the exception that it does not have the foam spacer. This clip was used on the 1968 XR7 overhead console, 1967 - 1968 xr7 and standard model upper and lower console pads, seat back access panels and several other applications. This original clip holds tighter than the reproduction. We recommend using this used clip over our reproduction for applications like the seat back because the reproductions often do not cut it. Ford part number...

MSRP:$6.00
$6.00 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 14100 -

Injection molded plastic stops underdash squeaking from clutch pedal return spring. 2 required per car. Replaces Ford Part #: C1DZ-7A630-A

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24429 -

Stamped steel bracket that mounts on the rear of the calipers. These often fracture or rust out. We only sell the pristine units, two required per car, PS and DS are the same. Ford part # C8OZ-2B295-A Check out this video Check out our caliper tips and tricks video below: ...

$0 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 41003 -

Reproduction Stabilizer End Link Bolt for the 1967 Mercury Cougar - 1967 Ford Mustang

$0 Price: $9.25

Buy Details

Availability: In-Stock Item
Item #: 13929 -

This is the bushing that Ford lists as the REAR stabilizer end link bushing, but it works for both front and rear. Smaller image shows a comparison of the NOS(Left) and Repro (right). SOLD AS SET OF 8. Replaces Ford Part #: KC-55490-A.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10466 -

Single black Phillips oval headed screw for attaching the face pads onto 1967 Mercury Standard Cougars (non-XR7 models). Sold individually, we also sell these screws under SKU 100022599 in sets of 13 (better value). *Note - This screw is glossy black in color.

$0 Price: $3.47

Buy Details

Availability: In-Stock Item
Item #: 14-0017 -

Many of our customers have asked and requested how we clean and detail our parts. We use a combination of items, mostly fine steel wool and elbow grease. Cleans haze, crud, and years of oxidation and water spots from glass, aluminum, chrome, and rubber. 

$0 Price: $1.45

Buy Details

Availability: In-Stock Item
Item #: 26568 -

This Steering Box Cover Gasket Reproduction fits the 67, 68, 69, and 70. Replaces Ford part #: C3DZ-3581. If your original steering box is one of the few that is still tight then you will want to open it up, clean out all the decades old solidified grease and put new grease in.

$0 Price: $5.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0139 -

Replaces Ford Part #: 350983-S

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 11-0053 -

Used quarter window lower window guide stop. Made of black plastic, held on by a single bolt. Mounts to the window guide on any 1971-73 Mercury Cougar or Ford Mustang Coupe or convertible. One per side, sold individually.Replaces part # D1ZZ-6539805-A.

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0162 -

22992 "D" shaped top washer, Ford called it a 'stop'. See assembly picture. 1967-68 Mercury Cougar and Ford Mustang vent window pivot assembly. 1 per side, sold individually.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41773 -

Used Strap - Large Wire Loop for the 1968 Mercury Cougar or 1968 Ford Mustang

$0 Price: $1.29

Buy Details

Availability: In-Stock Item
Item #: 41413 -

Reproduction Universal Strap / Medium Wire Loom for the 1967 Mercury Cougar or Ford Mustang 

$0 Price: $4.65

Buy Details

Availability: In-Stock Item
Item #: 41040 -

This nut fits onto the strut brace at the front of the car, and not the control arm end. It is the lock nut that goes on after the the bigger strut rod bushing nut.Replaces Ford part # 340460-S

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10836 -

Reproduction 8-32 x 1/2" stud used to attach the convertible boot mouldings on any 69-73 Cougar or 65-73 Mustang. A number of these studs were installed on the mouldings, going through the body of the car and attached underneath the sheet metal using the boot nuts.

$0 Price: $0.45

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19482 -

These studs attached the taillight housing to the tail panel of a 1969-70 Cougar. 6 used per taillight, 12 required per car. Sold individually.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $4.95

Buy Details

Availability: In-Stock Item
Item #: 41262 -

Stud for attaching heat shield to passenger side exhaust manifold. Fits all 1968 Mercury Cougar or Ford Mustang and other Ford too. Sold individually. Phosphate & Oil (gray-black)

$0 Price: $4.95

Buy Details

Availability: In-Stock Item
Item #: 41127 -

Stud for attaching exhaust manifold heat shield on 1969 Mercury Cougar or Ford Mustang with 351W. Sold individually. Replaces Ford Part # 382592-S

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 31171 -

Exhaust manifold bolt / stud for mounting the heat shield on the passenger side. This is the longer of the two stud bolts. See item 41350 for the short heat shield bolt. For all Mercury Cougar or Ford Mustang, Torino, Cyclone, etc. with Q or R code 428 cobra Jet engines with factory cast iron exhaust manifolds. We also sell the complete bolt kit for the CJ exhaust manifolds. 382803-S

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 41350 -

Exhaust manifold bolt / stud for mounting the heat shield on the passenger side. This is the shorter of the two stud bolts. See item 31171 for the short heat shield bolt. For all Mercury Cougar or Ford Mustang, Torino, Cyclone, etc. with Q or R code 428 cobra Jet engines with factory cast iron exhaust manifolds. We also sell the complete bolt kit for the CJ exhaust manifolds. 

$0 Price: $5.35

Buy Details

Availability: In-Stock Item
Item #: 41261 -

Stud for attaching exhaust manifold heat shield on passenger side. Sold individually Phosphate & Oil (gray-black) Replaces Ford Part # 382338-S

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13067 -

Used stud and nut for inserting and attaching to used or reproduction side marker lenses. Red or amber lenses.

$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 30657 -

Reproduction mounting studs for the side marker light lenses on 1970 Cougars and Mustangs. 2 required per light, 8 per car.Sold as a pair.

$0 Price: $4.75

Buy Details

Availability: In-Stock Item
Item #: 13803 -

Gray plastic rod with rubber visor tip. Fits most 70's cars built by Ford. Replaces Ford Part #: D3AZ-6504114-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torque specs for my rocker arms on my Cougar. I wanted to check to make sure they where in specs when I was replacing my valve cover gaskets. No one I called could tell me because it wasn't on there computer. At WCCC they said they were not sure but looked...