Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1057-1104 of 1684
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 30955 -

New black screw for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2See related items for set of 4 screws as a kit. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31994 -

New black (set of 4) screws for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2 Check out our video on rebuilding your shifter below: ...

$0 Price: $0.23

Buy Details

Availability: In-Stock Item
Item #: 32707 -

Zinc plated screw for attaching the chrome grille bars onto the grille sections of any 1967-68 Mercury Cougar. Sold individually. This is an 8 - 32 screw12 needed per car.

$0 Price: $0.99

Buy Details

Availability: In-Stock Item
Item #: 32152 -

AMK reproduction knurled pan head screw for the 1968 Mercury Cougar and Comet / Cyclone fender marker light. There were two different styles of fastener found on 1968 Cougars, was it a plant thing? We aren't sure. Ford part number 372856-S.

$0 Price: $4.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31331 -

Assembly line style knurled pan head screw for the 1968 Mercury Cougar and Comet / Cyclone fender marker light. There were two different styles of fastener found on 1968 Cougars, was it a plant thing? We aren't sure.Ford part number 372856-S.

$0 Price: $0.25

Buy Details

Availability: In-Stock Item
Item #: 32570 -

Pan head screw for attaching the sport mirror glass assembly into the passenger side painted sport mirror head. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. 8-32 pan head screw with Phillips screw head. Do you have questions about installing a passenger side mirror or using Riv-Nuts? ...

$0 Price: $2.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31330 -

Assembly line style pan head screw for the 1968 Mercury Cougar and Comet / Cyclone fender marker light. There were two different styles of fastener found on 1968 Cougars, was it a plant thing? We aren't sure. Not the knurled style.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 16159 -

New pan head screws for installing the tail light bezel on any 1971-73 Mercury Cougar. Sold individually, a total of 16 are used to install the brake light bezels (8 per side). #8 black pan head Phillips screw 1-1/2 inches long. Replaces Ford part number 56001-S.

$0 Price: $1.67

Buy Details

Availability: In-Stock Item
Item #: 27457 -

New pan head screws for installing the automatic console shifter bezel. Sold as a set of 4. Used in conjunction with the 3 metal strips to attach the automatic shifter bezel. Correct black pan head Phillips screw. *HINT - The metal strips can be made from any strips of steel, they don't really need the edges folded if you don't cinch them down too tight. Metal strip should be 1-11/16" x 5/8" with a hole in the middle.

$0 Price: $9.77

Buy Details

Availability: In-Stock Item
Item #: 30324 -

Reproduction anti rattler board - 1/8" panel board that prevents rattling noise. Installs on top of fuel tank on the side where the jack and spare tire mount.Measures 12" X 6"

$0 Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 26575 -

Replaces Ford part # D0OZ-6A892. For "D" shaped hole, steel valve covers. Reproduction of Ford part number D0OE-6A892-A.

$0 Price: $4.15

Buy Details

Availability: In-Stock Item
Item #: 41425 -

D shaped, slightly lower profile than the D0OZ-6892 and designed for the thinner stamped steel valve covers, no Ford part number on part. Replaces Ford Part # C6AZ-6892

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 26386 -

Reproduction PCV Plastic Ring for the 1970 and 1971 Mercury Cougar or 1970 - 1971 Ford Mustang with the 429 Cobra Jet or 429 Super Cobra Jet. Decal Text: AutoliteEV-48C9TZ-6A666-A Replaces Ford Part #: C9TZ-6A666-A.

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 10666 -

New air cleaner breather element for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, includes cartridge holder, retainer clip and filter.

$0 Price: $3.33

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12476 -

Used brake shoe guide plate, or anchor pin, that holds the top of the drum brake shoes together on your Mercury Cougar or Ford Mustang equipped with drum brakes. For the money our reproduction plate is a better value and cleaner, too. These have 1/2 inch holes in them.Replaces Ford part number C4UZ-2028-A.

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0056 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. Used pin for the locking lever in the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. Two are required in 1967-69, but only one is required for 1970 and up. Recommend changing to a up dated version of this pin with one that has circlips or snap rings (15-0156 for 1967 -69 or 15-0157 for 1970-1973) *NOTE* For tilt column service, you can contact Tony...

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41033 -

Reproduction Pitman Arm w/ 1" Sector Shaft Nut EACH for the 1967 Mercury Cougar or Ford Mustang

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0123 -

Used pivot pin for the Mercury Cougar or Ford Mustang / Thunderbird equipped with a tilt / tilt away column. This is a pressed pin with a flange and five are required per car. This pin is internally threaded with a # 8-32 thread. Ford part # D0AZ-3D739-A. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 16136 -

New black plastic retainer for attaching the front license plate bracket to the bumper beam on all 1973 Mercury Cougar. Two total needed for installing the lower license plate bracket. These "T" shaped retainers very closely resemble the originals. *Note - These are included with the purchase of our used front license plate bracket.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 32283 -

Brass screw in plug for select Autolite distributor vacuum advance units from 1968-71, typically the banded single advance units factory installed. Solid brass, originals were not, we believe that they were cadmium plated. Solid plug, should be hollow, with a 3/4 inch hex head. Works as it should. Fits most all vacuum advance that have a plug in the end as shown. *Note, when removing the old plug, there is a spring and washer inside. 

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26657 -

These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up. Plug size: 1 1/2"   also used for the electric headlight conversion kit for the firewall pass through body plug.  

$0 Price: $6.17

Buy Details

Availability: In-Stock Item
Item #: 32051 -

Used voltage regulator plug for the 67 - 68 Mercury Cougar. Plug end only, does not include any wiring.

$0 Price: $6.89

Buy Details

Availability: In-Stock Item
Item #: 42189 -

These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up.Plug Size 1 1/2"

$0 Price: $3.85

Buy Details

Availability: In-Stock Item
Item #: 27542 -

Set of 4 seat mounting access floor pan plugs, enough for one seat. 2 kits needed for both bucket seats. This is a good idea to pick up two sets of these when replacing carpeting. These are always rock-hard so if you plan on removing a seat and do not want to boil your old rubber parts to make them pliable enough to reinstall then you will want to pick a set of these up. Plug Size 1 1/2"

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26337 -

Reproduction master cylinder decal for the 1967 - 1969 Mercury Cougar or Ford Mustang. This decal was not used on later year cars. These types of decals are for the person to whom details matter.  Customer feedback found at mercurycougar.net:  Boy service is just not the same as the "good old"? days. I ordered a half a trunk load of parts and pieces from West Coast Classic Cougar and about 2 hours later got a phone call informing me that the order was picked and shipped. What are...

$0 Price: $9.86

Buy Details

Availability: Rare / NOS Part
Item #: 20448 -

Great color brochure showing the full line of Ford products.     ...

MSRP:$13.00
$13.00 Price: $6.89

Buy Details

Availability: Rare / NOS Part
Item #: 20451 -

Features all the Mercury line-up for 1970. Mint condition, ask us about wholesale pricing or stock trades as we have extras of this promo guide.     ...

MSRP:$13.50
$13.50 Price: $9.86

Buy Details

Availability: Rare / NOS Part
Item #: 20481 -

Features all the Mercury line-up for 1971.     ...

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30415 -

This plastic plate / bracket is installed between dimmer switch and the floor of your 67 - 73 Cougar to provide a bit or protection for the wiring.

$0 Price: $0.45

Buy Details

Availability: In-Stock Item
Item #: 11998 -

Push on retainer for heating and air conditioning box levers or shafts. Fits 3/16 inch studs or rods. In most cases you will also want to get a washer to go against the pinched stops. Probably fits most Ford products, not just 1967-73 Cougar and Mustang.Replaces Ford part number 383358-S.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31283 -

New push in retainer for any 1967-73 Mercury Cougar or Ford Mustang. These fasteners are used to attach the floor vent / duct to the blower housing, and to connect the defroster assembly to the blower housing, etc. Sold individually. These are all plastic with flush mounted head. Replaces Ford part number 380464-S.

$0 Price: $8.87

Buy Details

Availability: Out of Stock
Item #: 11-0293 -

Used push in retainer for any 1967-73 Mercury Cougar or Ford Mustang. These fasteners are used to attach the floor vent / duct to the blower housing, and to connect the defroster assembly to the blower housing, etc. Sold individually.Replaces Ford part number 380464-S.

$0 Price: $4.14

Buy Details

Availability: In-Stock Item
Item #: 41204 -

Fits 1968 Standard or XR7. Has a pair of longer screws for the 1968 lower section of the door panel. 

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 43840 -

Four needed per fan shroud. While not technically correct, some like the black screws over the silver because it better matches the radiator and shroud. Hexwasher Head #14 X 5/8 Tapping Screw Ford Part Number: 31498-S

$0 Price: $0.91

Buy Details

Availability: In-Stock Item
Item #: 10323 -

Concours bolt for all 1968-70 Mercury Cougar and Ford products including Mustang, radiator fan clutch to radiator cooling fan. 1/2 inch hex head size. Threads are 5/16-18. One bolt with captured split washer. Also available in a set of 4. ...

$0 Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 26596 -

Reproduction rear axle outer bumper for the Mercury Cougar or Ford Mustang. These units mount on frame rail, are push in and two are required per car. Sold as a pair. Replaces Ford part # C6AZ-4730.

$0 Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32032 -

Driver side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1970-71 Mercury Cougar and Ford Mustang.