Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Because of COVID-19, we now require a $25 $5* minimum website order (Read More)
loading . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 161
Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 41430 -

Reproduction anti-squeak pad for the leaf springs found on the Mercury Cougar or Ford Mustang. This little unit goes between each individual leaf spring and prevents metal to metal contact. These are sold individually and eight are required per car. Our reproduction leaf springs come with this pad pre-installed. Replaces Ford part # C0AA-5586.

Price: $87.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24630 -

Left side axle, 28 spline 27-1/16 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.*Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $139.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24629 -

Right side axle, 28 spline 31-1/8 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. *Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $230.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27516 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare 8 inch axle housing with proper axle pad spacing, vent location, brake line attaching, and fill plug in third member. Over-sized shipping length.Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long.

Price: $250.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24271 -

Bare housing with proper axle pad spacing for all 1967-1968 Cougars with 289 or 302 engines. Over-sized shipping length. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Axles needed: Passenger side - 31-1/8 inches long, Driver side 27 inches long. Replaces Ford part number C7ZZ-4010-E.

Price: $340.85

Buy Details

Availability: Out of Stock
Item #: 27514 -

Housing overall width - 54-1/4 inches flange to flange. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Spring perches are 43 inches apart on center. Complete rear end housing - drum to drum, with axles, and with pumpkin. 1967 EARLY 8 inch rear end housings with fill plug in the steel housing as seen from the back of the car. As removed from West Coast Cougar organ donor car. We recommend a bearing and seal inspection prior to...

Price: $399.85

Buy Details

Availability: Out of Stock
Item #: 24269 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long. Complete rear end housing - drum to drum, with axles, and with pumpkin. For all 1967-1968 Cougars with original 289 or 302 equipped engines. As removed from West Coast Cougar organ donor car. We...

Price: $890.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24270 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare 9 inch axle housing with proper axle pad spacing, vent location, brake line attaching, and rear fill plug. Correct for all early 1967 big block Cougars. Over-sized shipping length.Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long.

Price: $1,000.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27515 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long. Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1967 late big block Cougars and 1967 Mustang GT. Over-sized shipping length. This is the late 1967 housing that incorporates the oil fill plug in the third member or pumpkin. *Tip* If you are looking to strengthen your 1967-68...

Price: $1,000.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24538 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Complete rear end housing - drum to drum, with axles, and with pumpkin. First year for the oil fill plug in the cast third member. Also has little differences in the housing. As removed from West Coast Cougar organ donor car. We recommend a bearing and seal inspection prior to...

Price: $36.85

Buy Details

Availability: Normal Stock Item
Item #: 13000 -

New axle bearing for any 8 or 9 inch Ford rear end with 28 splined axles. Common on all Mercury Cougar and Ford Mustang with V-8 engines. Excludes 31 splined axles as found on Boss and Cobra Jet cars.These should be professionally installed with a bearing press.

Price: $13.85

Buy Details

Availability: Normal Stock Item
Item #: 18990 -

Correct leaf spring eye bushing bolts for the 1968 - 1973 Mercury Cougar. 5" in length. Set includes 2 bolts and 2 nuts. Replaces Ford Part #: C7ZZ-5781-A.

Price: $13.85

Buy Details

Availability: Normal Stock Item
Item #: 18989 -

Correct leaf spring eye bushing bolts for the 1967 Mercury Cougar. 6.5" in length. Set includes 2 bolts and 2 nuts. Replaces Ford Part #: C5ZZ-5781-A.

Price: $22.85

Buy Details

Availability: Normal Stock Item
Item #: 31582 -

Leaf spring front bolts for any 1967 Mercury Cougar or Ford Mustang. For some reason the 1967 bolts are a bit longer than later years. AMK F-1065, About 6-1/2 inches long. 6 total pieces, 2 bolts, 2 heavy washers, 2 nuts.

Price: $22.85

Buy Details

Availability: Normal Stock Item
Item #: 31583 -

Leaf spring front bolts for any 1968 Mercury Cougar or Ford Mustang. AMK F-368, About 4-3/8 inches long. 4 total pieces, 2 bolts, 2 nuts.

Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20362 -

Will work on 1967 9" differential but has slightly different angles as seen by our pictures. Bare bracket, rubber snubber sold separately.

Price: $4.50

Buy Details

Availability: Discontinued
Item #: 26525 -

Mounts on floor pan above the center of the rear axle over 3rd member on small block cars with 8 inch rear ends. Mustang only, will not fit a Cougar.Replaces Ford part #: C5ZZ-4730-B orC3AZ-4730-B. Customer Comment:Thank You Don and WCCC,Copy Cat's almost done!Yesterday was such a nice day I took Copy Cat out to Show Don and Lin the final (almost) product.Without their patience and understanding along with a great selection of parts I wouldn't have her in such great shape.Thanks guys, along...

Price: $1,608.85

Buy Details

Availability: Standard Dropship
Item #: 20509 -

Limited slip 8 inch Ford third member rebuilt with all new parts. Factory new 4 pinion Trac-Loc unit, new Motive ring and pinion gears, new Timkin bearings, new crush sleeve, new bolts, and new seal. Rebuilt using 1967 and newer two rib style case, with oil fill plug, and standard 1310 yoke. There are various ring and pinion (gear) ratios and axle splines available, if you are unsure of what you need it is best to call (503) 463-1130 for your order. This is a drop ship item. *Note - New...

Price: $1,999.85

Buy Details

Availability: Standard Dropship
Item #: 20510 -

Limited slip 8 inch Ford third member rebuilt with all new parts. Factory new Eaton True-Trac 8 pinion clutchless traction locking unit, Richmond ring and pinion gear, Timkin bearings, crush sleeve, bolts, and seal. Rebuilt using 1967 and newer two rib style case, with oil fill plug, and standard 1310 yoke. Ships with direction sheet and bottle of Ford Motorcraft friction modifier additive for the rear end gear oil. For use with 28 splined axles, but can be custom...

Price: $229.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25079 -

D0OZ-4204-9A300 1968-1973 9 Inch Third Member - Used Also called a pumpkin, 3.00:1 open ratio. These 3rd members will have the fill plug. Check your door tag under "Axle".

Price: $225.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30652 -

D0OZ-4204-9A300 1968-1973 9 Inch Third Member - UsedAlso called a pumpkin, 3.25:1 open ratio. These 3rd members will have the fill plug and 28 splined axles.Check your door tag under "Axle".

Price: $2,381.85

Buy Details

Availability: Standard Dropship
Item #: 19797 -

Limited slip, nodular 9 inch Ford third member rebuilt with all new or reconditioned parts. Used modern design Detroit Locker unit, new Richmond ring and pinion gear, new Timkin bearings, new selective size sleeve, new bolts, and new seal. Rebuilt using 1967-1973 nodular 9 inch cases with oil fill plug, for 28 or 31 splined axles. This unit was used in 1967-73 Cougars and Mustangs, but it also came in any other Fords or Mercurys with a 9 inch drop out center section....

Price: $1,508.85

Buy Details

Availability: Standard Dropship
Item #: 19801 -

Limited slip 9 inch Ford third member rebuilt with all new parts. New 4 pinion Trac-Loc unit, Richmond ring and pinion gears, Timkin bearings, crush sleeve, bolts, and new a seal. Rebuilt using the standard 9 inch case, with oil fill plug. Ships with direction sheet and bottle of Ford Motorcraft friction modifier additive for the rear end gear oil. For 28 or 31 splined axles. This unit is for 1967-73 Cougars and Mustangs, but it works for any other Mercurys or Fords with a 9 inch...

Price: $2,454.85

Buy Details

Availability: Standard Dropship
Item #: 19802 -

Limited slip 9 inch Ford third member rebuilt with all new or reconditioned parts. Rebuilt 4 pinion Trac-Loc unit, with new clutches, steels, Richmond ring and pinion gears, Timkin bearings, crush sleeve, bolts, and seal. Rebuilt using standard 9 inch cases with oil fill plug. Ships with direction sheet and bottle of Ford Motorcraft friction modifier additive for the rear end gear oil. For 28 or 31 splined axles. This unit was used in Cougars and Mustangs, but also any other Fords...

Price: $1,908.85

Buy Details

Availability: Standard Dropship
Item #: 19798 -

Limited slip nodular 9 inch Ford third member rebuilt with all new parts. New 4 pinion Trac-Loc unit, Richmond ring and pinion gears, Timkin bearings, selective size sleeve, bolts, and seal. Rebuilt using a nodular 9 inch case with oil fill plug. Ships with direction sheet and bottle of Ford Motorcraft friction modifier additive for the rear end gear oil. For 28 or 31 splined axles. This unit is for 1967-73 Cougars and Mustangs, but it can also be used for any other Ford or...

Price: $2,726.85

Buy Details

Availability: Standard Dropship
Item #: 19803 -

Limited slip 9 inch Ford third member rebuilt with all new parts. New Eaton True-Trac 8 pinion clutchless traction locking unit, Richmond ring and pinion gear, Timkin bearings, crush sleeve, bolts, and seal. Rebuilt using 1967-1973 standard 9 inch case with oil fill plug. For 28 or 31 splined axles. This unit is for 1967-73 Cougars and Mustangs, but can be used on any other Ford or Mercury with a 9 inch drop out center section. Because of all the various ring and pinion...

Price: $2,426.85

Buy Details

Availability: Standard Dropship
Item #: 19800 -

Limited slip nodular 9 inch Ford third member rebuilt with all new parts. New Eaton True-Trac 8 pinion clutchless traction locking unit, Richmond ring and pinion gear, Timkin bearings, selective size sleeve, bolts, and seal. Rebuilt using a 1967-1973 nodular 9 inch case with oil fill plug. For 28 or 31 splined axles. This unit is for 1967-73 Cougars and Mustangs, but can be used in any other Ford or Mercury with a 9 inch drop out center section. Because of all the...

Price: $193.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25076 -

Also called a pumpkin, 2.79:1 open ratio. Check your door tag under "Axle". 1967 code 0 (zero) 1968 code 2

Price: $182.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25077 -

Also called a pumpkin, 3.00:1 open ratio. Check your door tag under "Axle". 1967 code 1 1968 code 5

Price: $182.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30653 -

Also called a pumpkin, 3.00:1 locking ratio.Check your door tag under "Axle".Please note, that this is a vintage, two pin equa lock third member. Most of us should be looking at a modern design traction lock for spirited driving. The 1960's Equa-Lock, is pretty weak.1967 code A 1968 code E

Price: $248.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24068 -

Also called a pumpkin, 3.00:1 open ratio. 1967 9 inch third members did not originally come with fill plugs. The back of the housing had the oil fill plug. You can mix and match 9 inch assemblies from 1967-1970, just make sure that you have at least one fill plug. Check your door tag under "Axle". 1967 code 1

Price: $47.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20542 -

Since we always claim to have parts nobody else does... This welds to the bottom side of the car just above the differential. When the rear suspension bottoms out, this is the plate the rubber snubber / bumper (mounted on the front on top of the dif.) makes contact with.

Price: $94.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24173 -

289 and 302 engines - with C4 automatic transmissions or manual three / four speed. Shaft diameter will measure 2 3/4 inches. Length 54-3/16 inches, measured on U-joint centers. Used and 'as balanced' from the factory. Ask about slip yokes. Shipping is oversized due to length.  Ford part # C7WY-4602-A, Service Replacement part # C7WY-4602-E.*NOTE* This is a 2 piece drive shaft, meaning that it is two tubes slipped together and held together with rubber.

Price: $105.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24175 -

289 and 302 engines - with C4 automatic transmissions or manual three / four speed. Shaft diameter will measure 3 inches. Length 54-3/16 inches, measured on U-joint centers. Used and 'as balanced' from the factory. Ask about slip yokes. Shipping is oversized due to length.  Ford part # C7WY-4602-E.*NOTE* This is a two piece drive shaft.

Price: $517.85

Buy Details

Availability: Standard Dropship
Item #: 31355 -

Please allow up to two weeks for delivery. Reproduction one piece drive shaft for the 1967 - 1973 Mercury Cougar. Includes slip yoke and U Joints. Keep in mind that this repro drive shaft will only work on stock configuration cars. If the engine has been swapped, if you've had a different rear end installed etc., these drive shafts will not work. When ordering, be sure to specify (in the notes section) the year of your car, engine size and transmission type (automatic, 3 speed or 4...

Price: $44.85

Buy Details

Availability: Rare / NOS Part
Item #: 26719 -

Ford original eye let bushing 100% correct for the 67-69 Cougar without competition handling, but will fit on any 67-73 cat including those with competition handling. Ford Part #: C4DZ-5781-C.

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 26749 -

This eyelet bushing is made from higher grade rubber and unlike the NOS and other reproductions has a solid center shaft. The center shaft of the NOS (and reproductions of the NOS) are a flat piece of steel that is bent into a circle to make the shaft for the eyelet bolt to go through. These premium eyelet bushings have a milled center shaft with no breaks, giving them superior strength. See the inset image for a graphical comparison.Two per car, these are used on one end of the leaf springs...

Price: $46.85

Buy Details

Availability: Normal Stock Item
Item #: 10863 -

Reproduction rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on 1967 - 1968 Mercury Cougar and Ford Mustangs. New part with a fine threaded stud, also called a pinion bumper. The correct casting number is seen on this rubber axle bumper is C3AA-4906-C, this version has fine threads. The version most often seen on the 1969-70 is C9OA-4906-A. It will have a course threaded mounting stud.

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 10576 -

Gasket for sealing the 8 inch third member in most corporate Ford rear ends. Typically found in all 1967-68 Mercury Cougar and Ford Mustang with 289 or 302 engines. Exception for Mustangs with the GT option, those cars would have had 9 inch rear ends.

Price: $1.85

Buy Details

Availability: Normal Stock Item
Item #: 13002 -

New outer axle gasket for any 8 or 9 inch Ford rear end with 28 splined axles. Common on all Mercury Cougar and Ford Mustang with V-8 engines. Excludes 31 splined axles as found on Boss and Cobra Jet cars. One required per side, two per car.

Price: $9.85

Buy Details

Availability: Normal Stock Item
Item #: 26617 -

Rubber isolator pads for Mercury Cougar rear leaf springs. Sold individually, four per car. Replaces Ford part #: C6OZ-5741.

Price: $374.85

Buy Details

Availability: Standard Dropship
Item #: 43106 -

Factory replacement leaf springs. All springs include front eye bushings. These may be shipped directly from the manufacturer. The leaf springs differed between the Mustang and the Cougar. These are Factory spec replacement leaf springs for the Cougar. NOTE: If you have a Cougar with a front bench seat, it would have come from the factory with a heavier duty leaf spring the account for the weight of a 6th person. These heavier duty springs are only necessary if you ever intend on actually...

  • < Prev
For your convinence, you can view this page on our old site by the following link:
View Page On Old Site.