Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 193
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 30386 -

Hex bolt for attaching fuel line clips. 5/16-18 bolt. See related items for reproduction clips.

$0 Price: $9.77

Buy Details

Availability: Out of Stock
Item #: 16000 -

Reproduction diaphragm pump that mounts on the front all 67 - 73 Cougar or Mustang Autolite 2V carbs as well as 1967 Autolite 4V Carbs. With today's gas, these commonly fail, especially when sitting for extended periods of time. Complete failure will cause fuel leaks, but many times these will affect performance well before a leak actually starts. Good idea to replace every few years or if sitting for 6 months or more. Replaces Ford Part #: C4AZ-9B559-A.

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 30567 -

Includes 2 hex head Screw & Washer Assembly aka "SEMS" bolts for the throttle cable bracket on the 1970 Cougar or Mustang equipped with the 428 Cobra Jet.

MSRP:$10.00
$10.00 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 30513 -

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The benefit of using this foam float, is that sometimes the hollow brass float will leak, causing a bad reading. This foam version of the float is fuel resistant and will never leak. Replaces Ford part #C0AZ-9202-B.Check out the video below on our new gauge tester: ...

MSRP:$10.00
$10.00 Price: $8.55

Buy Details

Availability: In-Stock Item
Item #: 14258 -

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The problem with these brass floats, is that after year of being in contact with fuel, they will begin to corrode and disintegrate. We suggest going with the new foam floats. They are fuel resistant and will last longer. Find it here. Replaces Ford part #C0AZ-9202-B.Check out the video below on our new gauge tester: ...

$0 Price: $594.77

Buy Details

Availability: In-Stock Item
Item #: 32111 -

Reproduction polished aluminum 600 CFM "Street Warrior" carburetor for the 67 - 73 Cougar or Mustang. Replaces Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. Performance upgrade for stock to mildly modified V-8 enginesCalibrated for excellent street performance right out of the boxFactory preset electric choke for easy startupsVacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing &...

$0 Price: $1,985.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33435 -

1970 428CJ-4V Holley 4150 carburetor, automatic C6 transmission - all 50 states. D0ZF-9510-AD stamped on the carburetor air horn. Holley list #4516, 735 cfm. Core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. *With air conditioning. This carburetor has been previously restored, we have noticed that one of the metering blocks has the wrong number. Still has the manual choke lever, and has a throttle kicker. Look carefully, some...

$0 Price: $550.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33575 -

New Street Avenger carburetor. The 350 CFM Street Avenger carburetor has great features such as optimized street calibrations...two vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters; and an included 3/8" fuel line connection so there are no unnecessary trips back to the parts store. Known to bolt in right out of the box. The Avenger series are the first carburetors to have a limited lifetime warranty. With a great...

$0 Price: $40.25

Buy Details

Availability: In-Stock Item
Item #: 10482 -

Basic kit for rebuilding your Ford Autolite or Motorcraft 2100 or 2 barrel carburetor. Covers all factory 2 barrel carburetors on any 1967-73 Mercury Cougar and Ford Mustang with Autolite or Motorcraft 2100 carburetors. Excludes later 2150 carburetors.

$0 Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 18906 -

Carburetor idle mixture screw caps like originally came on the cars from the factory. Exact reproduction of Ford part number C7AZ-9J500-A. This clip onto the idle mixture screws of any 1967-73 Autolite or Motor Craft carburetor 2100 or 4300. They also will fit the 429 Cobra Jet with Ford numbered Rochester Quadrajet carburetors in 1970-71. Sold as a PAIR.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23814 -

Factory cast aluminum two barrel carburetor spacer plate. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. Fits all Ford 2 barrel carburetors, bore size is 1-5/8 inches in diameter. ...

$0 Price: $2.15

Buy Details

Availability: In-Stock Item
Item #: 11811 -

New 390 2BBL Carburetor spacer gasket for the 1968 X code 390-2V engine. Two needed per installation, one on both sides of the spacer plate.

$0 Price: $5.82

Buy Details

Availability: In-Stock Item
Item #: 15292 -

New carburetor gasket for 67 - 70 Cougar or Mustang with 390 or 428 cobra jet engines and Ford numbered Holley carburetors. One or two needed per installation (with or without spacer plate) sold individually.

$0 Price: $5.95

Buy Details

Availability: In-Stock Item
Item #: 19973 -

New carburetor gasket for all 289-4V, 302-4V, and 351-4V, Mercury and Ford cars from 1964-1970. Same gasket used between intake manifold and spacer, and spacer and carburetor. Sold individually, 2 required for complete installation with Ford 1 inch factory spacer and correct numbered Autolite 4300 carburetors.

$0 Price: $110.95

Buy Details

Availability: In-Stock Item
Item #: 30671 -

Reproduction manual choke cable and knob. This one closely resembles the factory manual choke as found on all 1969-70 Mercury Cougar Eliminators with the G code Boss 302 engine and the 1969-70 Ford Boss 302 Mustang. Additionally this style choke was used on all 1970 428 Cobra Jet engines. See the experts for dash mounting locations.

$0 Price: $24.85

Buy Details

Availability: In-Stock Item
Item #: 32356 -

Carburetor choke pull off for most 2V and 4V Autolite or Motorcraft carburetors 1958-74. Diaphragm with a hook on it, to 'pull off' the choke. Ford basic part number is 9J549, part of the dashpot assembly. We do not think that it will fit Holley carburetors. Also fits AMC and Jeep that used Autolite and Motorcraft carburetors. 

$0 Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 31594 -

Clips or clamps for attaching the 3/8" hard fuel lines to the body of any 1968-73 Mercury Cougar or Ford Mustang. Clips only, save your attaching body bolts. Sold in packages of 4 clips as shown. Will work on 1967 cars if you change to 3/8 lines. 1971-73 Cougar owners can use item 27565 attaching bolts, they are the same as the fuel tank mounting bolts. See related items. Replaces Ford 354663-S8

$0 Price: $61.85

Buy Details

Availability: In-Stock Item
Item #: 41055 -

Reproduction Convertible Brake & Fuel Line Clamp Kit for the 1970 Mercury Cougar - 1970 Ford Mustang 

$0 Price: $67.35

Buy Details

Availability: In-Stock Item
Item #: 41057 -

Reproduction Convertible Fuel Vapor Line Clamp Kit for the 1970 Mercury Cougar - 1970 Ford Mustang 

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 41056 -

Reproduction Coupe Brake and Fuel Line Clamp Kit for the 1970 Mercury Cougar - 1970 Ford Mustang 

$0 Price: $67.35

Buy Details

Availability: In-Stock Item
Item #: 41058 -

Reproduction Coupe Fuel Vapor Line Clamp Kit for the 1970 Mercury Cougar - 1970 Ford Mustang 

$0 Price: $31.85

Buy Details

Availability: In-Stock Item
Item #: 41855 -

Exhaust Manifold Choke Stove Rebuild Kit for All Small Block and Big Block Engines 1967 - 1973. Includes Stainless Steel Mesh Filter Element and Choke Stove End Cap Fitting.

$0 Price: $6.95

Buy Details

Availability: In-Stock Item
Item #: 10600 -

Fuel tank filler cap for all 1970 Mercury Cougars with California emissions. All cars with DSO numbers 52 & 53 came with emission controls that vented fuel fumes into a charcoal canister. This is a non-vented fuel cap, and only fits the specific 1970 emissions filler necks.

$0 Price: $5.94

Buy Details

Availability: In-Stock Item
Item #: 10599 -

New replacement gas tank filler cap for all 1967-69 Mercury Cougars and 1970 Cougars without California emissions. This is a vented fuel cap.

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25152 -

OEM used. Rust and damage free. Installation gasket, clamps, and hoses are available. Fits 1970 20 gallon emissions fuel tank. DSO 52 and 53 California.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25024 -

1970 California evaporative system. Tapered hose. This item is not reproduced and it is getting to be hard to find a good pliable hose with no damage.Filler neck not included.

$0 Price: $72.73

Buy Details

Availability: Out of Stock, On Order
Item #: 33885 -

Reproduction fuel filler neck for the 70 Mercury Cougar. Fits 1970 22 gallon non-emissions fuel tank. 49 states (non-California).

$0 Price: $125.00

Buy Details

Availability: Rare / NOS Part
Item #: 33419 -

New Old Stock 1970 California evaporative system tapered filler neck hose. Soft and pliable, never installed.Ford part number D0DZ-9047-A

$0 Price: $75.02

Buy Details

Availability: Out of Stock
Item #: 13693 -

Used factory installed vented fuel, or gas cap as installed on 1967-69 Mercury Cougar 1970 cars without California emissions. Also fits 1969-70 Shelby Mustang. In 1970 California required a non-vented fuel cap.We stock these in limited quantities, and will have an intact paper gasket. Correct "VENTED" embossed and has the "S" stamped onto the center rivet. Price is established by demand, and these normally are only needed for very high level restorations or strict concours judging...

$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 30313 -

Reproduction ribbed aluminum foil backing plate for the gas doors on the 1969 and 1970 Mercury Cougar and XR7 models.

$0 Price: $439.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32242 -

Original part removed from an Eliminator parts car many years ago. The frame is the same as the 69-70 common fuel door with 2 extra holes drilled, the cat emblem is the same as what is found on a 1970 Standard / Eliminator Cougar center grille. On the units that have a faded background foil, we gently remove the emblem and replace the black foil with a reproduction. Keep in mind we do not retake pictures each time we get a different unit in stock (which is seldom).This will work on any 69-70...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24678 -

Good used fuel door framed insert, without the crest as shown. These in most cases will not include the thin foil backing plate as shown. "A" grade will have minor rust pitting and some dullness on the chrome, overall very good used.Foil backing plate available in reproduction, see related items.

$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24679 -

Fair used fuel door framed insert, without the crest. These most often will not include the thin foil backing plate as shown. "B" grade will have some rust pitting and some dullness on the bright work, overall fair used. Foil inserts available used in limited quantities.

$0 Price: $130.01

Buy Details

Availability: In-Stock Item
Item #: 31996 -

Restored fuel door framed insert without the background decal or crest, for the 1969 - 1970 Mercury Cougar. Foil backing plate available in reproduction. At the moment there are no reproductions on the walking cat, you can however polish up your old cat and re-use it in this frame.

$0 Price: $38.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33264 -

New Old Stock gas door. Fits all 1969-70 Mercury Cougars. Ford part number C9WY-65405A26-A

$0 Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24757 -

Used gas door with hinge spring. The black painted door as shown in the picture is a service replacement fuel door. Used doors are bare steel and will come with the hinge and spring.  Ford part number C9WY-65405A26-A

$0 Price: $194.85

Buy Details

Availability: Rare / NOS Part
Item #: 33148 -

This filter ONLY fits the following 1967 - 1973 Cougars: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many Mustang applications. Replaces Ford Part #: C7OZ-9155-A, Filter FG-19.

$0 Price: $18.05

Buy Details

Availability: In-Stock Item
Item #: 41436 -

This filter ONLY fits the following Ford Holley 1967 - 1973 Cougars: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many Mustang applications. This is a service replacement filter, it has D2AE-9155-AA stamped on the body of the filter. Replaces Ford Part #: C7OZ-9155-A, Filter FG-19 and C9AZ-9155-B,  FG-39.

$0 Price: $30.69

Buy Details

Availability: In-Stock Item
Item #: 33629 -

This filter fits all V8 Mercury Cougars or Ford Mustangs with the Autolite Carburetor. This filter fits all 1967 - 1973 Cougars except for the following: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many 6 cyl Mustang applications. These Filters are precisely designed and engineered to meet OEM requirements and fitment. Delivering high efficiency filtration, our filters meet modern engine demands for maximum fuel flow. Prevents harmful contaminants such as dirt,...

$0 Price: $8.15

Buy Details

Availability: In-Stock Item
Item #: 11802 -

This filter fits all V8 Mercury Cougars or Ford Mustangs with the Autolite Carburetor. This filter fits all 1967 - 1973 Cougars except for the following: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many 6 cyl Mustang applications. These Filters are precisely designed and engineered to meet OEM requirements and fitment. Delivering high efficiency filtration, our filters meet modern engine demands for maximum fuel flow. Prevents harmful contaminants such as dirt,...

$0 Price: $20.91

Buy Details

Availability: In-Stock Item
Item #: 41857 -

Quality U.S.A. made hose with concours repeating GAS markings. Also include OEM mounting hardware. Replaces Ford Part #: C7ZZ-9327-A. Check out our video on replacing the fuel system on a '68 Cougar

$0 Price: $28.05

Buy Details

Availability: In-Stock Item
Item #: 14961 -

This is the OE steel tube that goes from the Ford Holley carburetor to the Carter X fuel pump. This was copied to fit the vintage Ford Holley 4150 carburetors as originally found on 1968 390-4V, and 1968-70 428CJ engines. *Note - Designed to fit OEM Carter X fuel pump with screws holding two halves together. Modern Carter fuel pumps are crimped and will need some bending of this tube to fit. Please see item 11761 tube for use with generic Carter fuel pumps. **Note - Excludes 1969 390-4V with...

$0 Price: $40.65

Buy Details

Availability: In-Stock Item
Item #: 31551 -

This is the steel tube that goes from the carburetor to the fuel pump. Designed to fit OEM Carter X fuel pump with screws holding two halves together. Modern Carter fuel pumps are crimped and will need some bending of this tube to fit. Please see item 11761 tube for use with generic Carter fuel pumps.

$0 Price: $30.89

Buy Details

Availability: In-Stock Item
Item #: 19902 -

This is the steel tube that goes from the carburetor to the fuel pump on the 289 or 302 with the AutoLite 4300 4 barrel carberator. Original steel version.

  • < Prev