Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-288 of 457
$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27356 -

Engine oil dipstick as found on most any 1970-73 Ford with 351 Cleveland engines (H, or M Code), 1972-73 (Q code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dipstick end is approximately 21-11/16 inches. The handles were painted blue originally. Ford part # D0AZ-6750-A, Ford casting # D0AE-6750-A.*NOTE* In 1970 351W engines also were designated as H codes, 351W has 6 bolts attaching the valve covers,...

MSRP:$160.00
$160.00 Price: $114.25

Buy Details

Availability: In-Stock Item
Item #: 26023 -

Famous 'Cal Custom' aluminum finned oil pan that was so popular throughout the 60's, 70's and 80's. It has not been available for years, but it is back again. Pan is made from all new pressure die cast tooling and then fully machined to offer a precise fit and leak free installation. These look great in combination with the Finned Air Cleaner and Valve Covers. Replaces Ford Part #: C5ZZ-6675.

$0 Price: $30.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33549 -

Used oil screen pick up tube assembly from a small block Ford 260, 289, or 302 engine. This is for most front sump 260, 289, or 302 engines in Ford cars up to at least 1972. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item.* Excludes 351W and 351C engines, and all F Series...

$0 Price: $55.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33553 -

Used oil screen pick up tube assembly from a 385 series big block Ford 429 Cobra Jet or 429 Police engine. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes.  * Excludes regular 429 / 460 passenger car engines, and all F Series pickup trucks, which have rear sump oil pans. Replaces Ford Part #: D0OZ-6622-A ...

Oil Pressure Sending Extension - DUAL PORT - Repro ~ 1963 - 1973 Mercury Cougar - 1963 - 1973 Ford Mustang
Ford Bronco (1966-1977)|Ford F-100 (1973-1983)|Ford F-250 (1973-1986)|Ford F-350 (1973-1986)|Ford Fairlane (1964-1973)|Ford Falcon (1964-1970)|Ford Galaxie (1964-1967)|Ford Gran Torino (1972-1973)|Ford Mustang (1964-1966)|Ford Ranch Wagon (1964-1973)|Ford Ranchero (1964-1973)|Ford Thunderbird (1964-1973)|Ford Torino (1968-1973)|Mercury Comet (1969)|Mercury Comet (1971-1973)|Mercury Cyclone (1969-1971)|Mercury Marauder (1969-1970)|Mercury Marquis (1969-1973)|Mercury Montego (1969-1973)|Mercury Monterey (1969-1973)
0
$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 32221 -

Hex shaped Oil Pressure Sending Unit Extension. Mounts the oil pressure sensor away from the engine blockConstructed from steel with a durable zinc finish. 1/4" NPT male & female ends plus an additional 1/8" NPT female port for items requiring an auxiliary oil pressure source. Eliminates the need for a T-fitting adapter when adding an aftermarket gauge or sensor. Replaces Ford Part # : C2OZ-9B339 and D1UZ-9B339-DP

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16197 -

Hex shaped extension. Made from machined metal. Used and road tested steel extension for installing your oil pressure sending unit. Part shipped normally will not be as clean as the one pictured, we strongly suggest cleaning the inside oil passage prior to installation, it is a used part. Fits all 289, 302, 351W, 390, 427, 428CJ engines. Several versions found on this item. Steel and aluminum construction. We have both in the bin. Please note that the 351C or 351 Cleveland engine has the it's...

$0 Price: $65.00

Buy Details

Availability: Out of Stock
Item #: 33326 -

NOS air cleaner breather element filter assembly for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, "AUTOLITE" marked also FA-79.  Casting number D0OF-9D696-A. Ford part number D0OZ-9D695-A.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 26386 -

Reproduction PCV Plastic Ring for the 1970 and 1971 Mercury Cougar or 1970 - 1971 Ford Mustang with the 429 Cobra Jet or 429 Super Cobra Jet. Decal Text: AutoliteEV-48C9TZ-6A666-A Replaces Ford Part #: C9TZ-6A666-A.

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 10666 -

New air cleaner breather element for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, includes cartridge holder, retainer clip and filter.

$0 Price: $95.40

Buy Details

Availability: In-Stock Item
Item #: 53267 -

Pertronix brand 7mm spark plug wires. These are performance oriented wires compared to the concours spark plug wires. For any 1967-73 Mercury Cougar and Ford with 289 or 302 engines. Black wires and boots, quality spark plug wires taylor made for the small block Ford engines. Recommended by Pertronix for use with the Flame Thrower coils.

$0 Price: $78.17

Buy Details

Availability: In-Stock Item
Item #: 53268 -

Powerful oil filled coil that generates 40,000 volts, designed to work with the either of our Pertronix Ignitors. Sold in black or chrome. *Note - This coil is not necessarily needed with the Pertronix Ignitors, the stock Ford coil works fine for most applications.

$0 Price: $20.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33595 -

Used cover plate or thrust plate that retains the camshaft on the front of Ford V-8 engines such as 351C, 351M, 400, 429, 429CJ, and 460. 1970-76 Mercury Cougar or 1968-76 Ford anything. We have found a Ford number of C8SZ-6269-A. 

$0 Price: $26.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33334 -

Used air cleaner base plug, plugs the area pre cut from the factory. Typically found on 70 - 73 Cougar and Mustang.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 32283 -

Brass screw in plug for select Autolite distributor vacuum advance units from 1968-71, typically the banded single advance units factory installed. Solid brass, originals were not, we believe that they were cadmium plated. Solid plug, should be hollow, with a 3/4 inch hex head. Works as it should. Fits most all vacuum advance that have a plug in the end as shown. *Note, when removing the old plug, there is a spring and washer inside. 

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31118 -

Used power steering oil cooler for many 1971-73 Ford, Lincoln and Mercury cars with air conditioning. Specifically these came from 1971-73 Mercury Cougar or Ford Mustangs with factory installed air conditioning and power steering. This unit mounts to the top of the A/C compressor. This installs inline with the low pressure return hose.  Manufactured by the Blissfield Company and has a Ford stamped number of D1AA-3D746-AB. The Ford engineering number is D1AZ-3D746-D. 

$0 Price: $11.85

Buy Details

Availability: In-Stock Item
Item #: 10061 -

Aluminum Preheater hose that is used to preheat carburetor air. This 2" X 18" aluminum flex / stretch type hose attaches from the exhaust manifold shroud to the bottom of your air cleaner snorkel.  This hose is sold individually and does not come with clamps.If you prefer, you can grab the cloth type hose here.  ...

$0 Price: $79.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25040 -

Has casting number D0OE-6312-B stamped on the inside. Application for 1970 all 351 engines, 1971 M code 351-4V, and 1971 and 1972 H code 351-2V engines with power steering or idler pulley. Dual sheave crankshaft pulley measurement of 8.00" and 6-11/16" diameters. No air conditioning. Ford Master Part number D0OZ-6A312-E. Four bolts hold it on too.

$0 Price: $143.87

Buy Details

Availability: Out of Stock
Item #: 31397 -

Single sheave crankshaft pulley. No options, one single fan belt around the crank shaft pulley, water pump pulley, and the alternator. Probably found on Boss 351, and other 351C cars without power steering or air conditioning.Pulley marked D1ZE-6312-AA.

$0 Price: $97.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25039 -

D0OE-6312-A For both Windsor and Cleveland 351 engines starting in 1970. This is a single sheave pulley, meaning without air conditioning and without power steering. One groove with a diameter of 6-11/16 inches in diameter. Ford Master Part number D0OZ-6A312-A. A four bolt hole crankshaft pulley for use with 1970 and upward crank dampeners.

$0 Price: $85.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24992 -

D0AE-6312-C For both the Cleveland and Windsor variety. Starting in 1970 Ford tried to standardize many of the engine parts. This is the "with air conditioning" pulley for all 1970 - 1971 351-2V & 351C-4V engines, and all 1972 -1973 351-2V engines. Triple sheave 6-23/32", 8.00", 8-13/32" inch diameters. A four bolt hole crank shaft pulley for use with 1970 and upward crank dampeners. Ford Master Part number D0AZ-6A312-C. *Excludes 1972 and 1973 Q code 351CJ engines. This means all 1972 and...

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18592 -

Applications, 1970 - 1971 - 1972 351c engines, All with or without air conditioning. Casting number D0OR-B. 6-1/4" diameter and 7/16" sheave width.

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18589 -

Applications, 1970 351w engines, 1971 429CJ engines, and 1973 351c engines. All with or without air conditioning. Casting number D0AR-A. 5-3/4" diameter and 7/16" sheave width.

$0 Price: $85.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21612 -

Applications various 302 / 351/ 429 engines. All with or without air conditioning. Casting number D0AR-B. 5-13/32" diameter and 7/16" sheave width.Ford part number C9TZ-3A733-D.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24597 -

Used water pump pulley used on 1970-73 Mercury Cougar and Ford Mustang with 351 engines and air conditioning. This pulley is 5-15/16 inches in diameter. Pulley stamped C9OE-8509-F.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10291 -

Single sheave pulley 6-61/64 inches in diameter. This pulley is designed to run on the inner most belt plane next to the water pump. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2-5/16 inches. Applications:1970 Boss 302 Eliminators with power steering**1970 351 with power steering**1971 - 1973 351 engines with power steering or with idler pulley without air conditioning* Ford casting number D1AE-8509-BA....

$0 Price: $81.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24643 -

Single sheave pulley 6-61/64 inches in diameter. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2-5/16 inches. Applications:1970 Boss 302 Eliminators with power steering**1970 351 with power steering**1971 - 1973 351 engines with power steering or with idler pulley without air conditioning* Ford casting number C9OE-8509-G.  Ford part number C9OZ-8509-D Note:  * The Master Parts...

$0 Price: $576.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 14735 -

Usually ships in 3-5 business days. Reproduction direct fit OE style 3 row MaxCore radiator, designed for optimal performance with increased tube size and amount of fins. Our supplier uses higher copper purity for long lasting durability and heat transfer.

$19.00 Price: $43.85

Buy Details

Availability: Out of Stock
Item #: 32768 -

New old stock Chrome radiator cap. Motorcraft stamped, with RS-512A, and 13# Pound rating is stamped on cap. Replaces Ford Part #: C9ZZ-8100-A.

$19.00 Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 14184 -

These concours quality Zinc caps are made in America and bear all the original markings. O.E.M. details include original letter style, "S.M.C.O." and "Autolite". Pound rating is stamped on cap. Replaces Ford Part #: C7ZZ-8100-A.

$19.00 Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 14190 -

These concours quality Zinc caps are made in America and bear all the original markings. O.E.M. details include original letter style, "S.M.C.O." and "Autolite". Pound rating is stamped on cap.