Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 193-240 of 4620
$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25148 -

Ashtray only, for 1970 Mercury Cougar XR7, this has the burl wood and chrome trim.Check out this video

$0 Price: $70.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19008 -

Chrome finish is average at best. Grade B used, will have pits and or obvious blemishes in the brushed chrome, includes the ash tray receptacle. We sometimes have grade A used, see related items. Replaces Ford part number C7ZB-65048A42-A.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24782 -

Used ashtray assembly for use in 1969 Mercury Cougar and Ford Mustang without center consoles. Pebble grain finish, you paint to match your interior color. Cigar lighter and ash tray knob not included. Illumination light socket and wiring available separately.

$0 Price: $31.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24851 -

Under dash installed ashtray for all 1969 Mercury Cougar and Ford Mustang without console. Ashtray drawer combination only used in 1969, smaller version than the 1970 ashtray. Pebble grain finish you paint to match you interior color. Knob and bezel not included. Ashtray only.

$0 Price: $34.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24752 -

Ashtray only for 1969 Mercury Cougar XR7, this has the burl wood and chrome trim. Chrome knob and bezel not included.

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25128 -

Under dash ashtray assembly for 1970 Mercury Cougar XR7, has burl wood and chrome trim. For 1970 the cigar lighter moved to the position where the ignition switch used to be in 1969. Indicator light and wiring assembly not included.  Check out this video

MSRP:$96.00
$96.00 Price: $66.87

Buy Details

Availability: In-Stock Item
Item #: 19211 -

Get the Body, Interior, Electrical, and Chassis Assembly Manuals as a set and save big. These are a must have for anyone doing their own repairs. Even if you pay others to do your repairs you should always have these in hand when you hand the keys to your mechanic as it will save whoever does the work hours. These are the blueprints the line workers used to build these cars in the day. Every nut bolt and clip is shown. The exploded diagrams make it easy to know what goes where. You need to...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0057 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24630 -

Left side axle, 28 spline 27-1/16 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.*Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32503 -

Grille corner backing plate from a 1969 Mercury Cougar. This will be a driver side with the deep square groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do not...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32505 -

Grille corner backing plate from a 1969 Mercury Cougar. This will be a driver side with the shallow groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do not...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32504 -

Grille corner backing plate from a 1969 Mercury Cougar. This will be a passenger side with the deep square groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32506 -

Grille corner backing plate from a 1969 Mercury Cougar. This will be a passenger side with the shallow groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do not...

$0 Price: $37.67

Buy Details

Availability: In-Stock Item
Item #: 14040 -

Great chrome on this reproduction backup / reverse light for the driver side (left hand) of the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15512.

$0 Price: $37.67

Buy Details

Availability: In-Stock Item
Item #: 14025 -

Great chrome on this reproduction backup / reverse light for the passenger side (right hand) of the the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15511.

$0 Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 15819 -

This is the 4 hole version of the ball joint for the 1967 - 1969 Cougar and Mustang. Right is same as left. Two required per car. Hardware included.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24352 -

C8AF-9600-C Standard air cleaner base for all 1968 289-2V (C code), 302-2V (F code), 302-4V (J code), and 390-2V (X code). This is for a closed emissions system (IMCO), that included an oil cap with a fitting going to the air cleaner base and a PCV valve in the passenger side valve cover. About 17.84" inches in diameter. Identified with round nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-G. Ford part number C8AZ-9600-D.*Note - Canada did not...

$0 Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20242 -

Good used air cleaner base with none of the attaching parts. Will have a dent, rust inside or other repairable flaw. Correct for 289 2V or 4V non California Emissions equipped Cougar.*Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25262 -

D1AF-9600-FA Air cleaner base for all 1971 Cougars with the H code 351-2V engine. About 17.84" inches in diameter. Could also be found with casting number D1AF-9600-FB or D1AF-9600-FC. IMAGES BELOW ARE FOR REFERENCE ONLY, EXTRA PARTS ARE NOT INCLUDED Ford part number D1AZ-9600-F. ...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25494 -

D2AF-9600-BC Air cleaner base for all 1972 H code 351-2V engines. About 14.78" inches in diameter. Ford part number D2AZ-9600-B.

$0 Price: $66.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25600 -

D3ZF-9600-AA Air cleaner base for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number D3ZZ-9600-A.  Does not include snorkel.

$0 Price: $98.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24353 -

C8AF-9600-G Standard air cleaner base for all 351 engines, H code 351-2V and M code 351-4V. About 17.84" inches in diameter. Identified with the square nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-C. Ford part number C8AZ-9600-D.

$0 Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 42000 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. Standard Draw pictured above, High Draw pictured to the left. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C7ZZ-14300 ...

$0 Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 42007 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. For 1972-73 Mercury Cougar and Ford Mustang all with V-8 engines.Positive cable is 10 1/4" center to centerNegative cable is 42" center to centerGround wire is 41" center to center Replaces Ford Part # :...

$0 Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41981 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For any 1970-71 Mercury Cougar or Ford Mustang with 302 or 351 engine and 43-55 AMP alternators. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces...

$0 Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41863 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For all 1972-73 Mercury Cougar or Ford Mustang with 43-55 AMP alternators and V-8 engines. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part...

$0 Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 41998 -

Each of these great OEM Style kits include all three required cables, proper terminal and post clamp ends. Unlike CONCOURS CORRECT cables, these do not have the Ford part numbers on them. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) NOTE: These cables are technically correct...

$0 Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41990 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C8ZZ-14300

$0 Price: $50.55

Buy Details

Availability: In-Stock Item
Item #: 15996 -

Everything you need to hold the battery down on your 71 -73 Cougar or Mustang. Included in this kit are the two stainless steel J-bolts, the hold down bracket and the hold down clamp.

$0 Price: $43.55

Buy Details

Availability: In-Stock Item
Item #: 41867 -

Concourse Correct with 22 & 24 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA by Mansfield Mustang to orig. Ford Specs includes attaching bolts Replaces Ford Part # C8ZZ-16060-A

$0 Price: $44.95

Buy Details

Availability: In-Stock Item
Item #: 41848 -

Concourse Correct with 22, 24 & 27 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA to original Ford Specifications, includes attaching bolts. Replaces Ford Part # C9ZZ-16060-A or C9ZZ-16052-P .

$0 Price: $40.65

Buy Details

Availability: In-Stock Item
Item #: 41866 -

Concourse correct with 22 & 24 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA by Mansfield Mustang to orig. Ford Specs includes attaching bolts Replaces Ford Part # C7ZZ-16060-A

$0 Price: $54.64

Buy Details

Availability: In-Stock Item
Item #: 13000 -

New axle bearing for any 8 or 9 inch Ford rear end with 28 splined axles. Common on all Mercury Cougar and Ford Mustang with V-8 engines. Excludes 31 splined axles as found on Boss and Cobra Jet cars.These should be professionally installed with a bearing press.

$0 Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0058 -

Used lower steering column bearing for the 67-73 Cougar or Mustang. The tilt columns take an upper and lower bearing, while the fixed column only takes an upper. The upper bearing can be found here. Outside diameter: 1.500"Inside diameter: 1.060" *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $68.85

Buy Details

Availability: Rare / NOS Part
Item #: 33114 -

NOS long shaft bearing for use on all 289, 302, or 390 engines. After 50 years of heat and use, many idler adjusting bearings have seized or are on their way out. This is your answer! This part requires a press to install it. Bearing surface is 1-7/16", bearing diameter is 1.180".  Shaft length (sticking out of bearing) 1 1/8" Ford numbers C4AZ-2990-A, C4AA-2A898-A. Check out this video ...

$0 Price: $54.85

Buy Details

Availability: In-Stock Item
Item #: 11-0413 -

Repair your own idler / tensioner with our bearing for use on all 289, 302, or 390 engines. After 50 years of heat and use, many idler adjusting bearings have seized or are on their way out. This is your answer! This part requires a press to install it. Bearing surface is 1-7/16", bearing diameter is 1.180".  Shaft length (sticking out of bearing) 1 1/8" Overall length 2-3/4" Ford numbers C4AZ-2990-A, C4AA-2A898-A. Check out this video ...

$0 Price: $59.85

Buy Details

Availability: In-Stock Item
Item #: 11-0414 -

Repair your own idler / tensioner with our kit which includes a dust cover and is for use on all 289, 302, or 390 engines. After 50 years of heat and use, many idler adjusting bearings have seized or are on their way out. This is your answer! This part requires a press to install it. Bearing surface is 1-7/16", bearing diameter is 1.180".  We have had a machinist shorten the shaft on these bearings so that they are easily pressed into the cast pulley brackets that use the short...

$0 Price: $83.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0083 -

Grade B used A/C center vent for standard (non XR7) model Cougars. These will have some defective chrome plating, and pitting. Fits the standard model (65A or 65C) Cougars with padded dash face pads. See our other listing for Grade A versions of this air conditioning center register or vent.*Note - Will not fit XR7 model Cougars.Replaces Ford casting number C7WA-19623 and C7WY-19893-A.

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0085 -

Grade B used A/C center vent for XR7 (non Standard) model Cougars. These will have some defective chrome plating, and pitting. Fits the XR7 model (65B) Cougars with woodgrain dash faces. See our other listing for Grade A versions of this air conditioning center register or vent. *Note - Will not fit Standard model Cougars. Replaces Ford number C7WY-19893-D.

$19.85 Price: $37.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10322 -

Dash color painted steel bezel that houses the courtesy lights on all 1969-70 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL ACCY. Sold pit free, often times we can select your desired color, but plan on detailing them if your undergoing a restoration.Replaces Ford part number C9WB-10964. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

$19.85 Price: $93.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16198 -

Dash color painted steel bezel that houses the courtesy switches with DEFOG on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL DEFOG. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-B. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

$0 Price: $92.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0100 -

Complete grade "A" bezel with perfect woodgrain and aluminum surround. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column. Notice the circular rings around the gauges are not discolored on this premium grade part. Ford part number C9WY-10B883-A. Check out this video

$0 Price: $92.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1021 -

Complete grade "A" bezel with perfect woodgrain and aluminum surround. The 1970 bezel is unique from 1969 in that 1969 had no curved cut-out for the larger diameter column. Notice the circular rings around the gauges are not discolored on this premium grade part. Ford part number D0WY-10B883-A. Check out the video below on our new gauge tester: ...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1237 -

Complete grade "B" bezel will have faded woodgrain, dull aluminum surround and there will also be a few scratches or cracks. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column.  Ford part number C9WY-10B883-A. Check out this video