Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1585-1632 of 4620
$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27254 -

Used driver side hidden headlamp hinge. This part affixes to the backside of the headlamp cover and acts as a hinge. The brass bushings have been inspected for wear, no collision damage and no rust. If you try to use a hinge from a 1967 built prior to 12-15-67 it will not fit on your 1968 Cougar. Ford part number C8WY-13A155-A. Check out this video ...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15986 -

Good used cut off driver side, trunk or deck lid hinge. Fits all 1971-72 Mercury Cougar and Cougar convertible models. Sometime in 1972, the hole spacing for the trunk lid changed from 3 inches to 4-1/4 inches spacing. This hinge will have the 3 inch spacing. These are welded to the body, expect some cleanup to the metal prior to welding. We do not drill spot welds.Additionally fits 1971-73 Mustang hardtop and convertible models (body style 65 and 76). Ford part number D1ZZ-6542700 and...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27238 -

Good used driver side trunk or deck lid hinge. Fits all 1972-73 Mercury Cougar and Cougar convertible models. Additionally fits 1972-73 Mustang hardtop and convertible models (body style 65 and 76). We also sell the driver side hinge individually. Sometime in 1972, the hole spacing for the trunk lid changed from 3 inches to 4-1/4 inches spacing. This hinge will have the 4-1/4 inch spacing. These are welded to the body, expect some cleanup to the metal prior to welding. We do not drill spot...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27237 -

Good used pair of trunk or deck lid hinge. Fits all 1967-70 Mercury Cougar and Cougar convertible models. We also sell the hinges individually. Ford part number C7WY-6542700 and C7WY-6542701.WCCC also sells torsion bars and the tool to remove and install trunk torsion bars.

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27239 -

Good used cut off passenger side, trunk or deck lid hinge. Fits all 1971-72 Mercury Cougar and Cougar convertible models. Sometime in 1972, the hole spacing for the trunk lid changed from 3 inches to 4-1/4 inches spacing. This hinge will have the 3 inch spacing. These are welded to the body, expect some cleanup to the metal prior to welding. We do not drill spot welds. Note that there are an early and late style of these hinges. Early style has a bolt spacing of 3 inches for installing the...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27236 -

Good used passenger side trunk or deck lid hinge. Fits all 1972-73 Mercury Cougar and Cougar convertible models. Additionally fits 1972-73 Mustang hardtop and convertible models (body style 65 and 76). We also sell the driver side hinge individually. Ford part number D1ZZ-6542700. Sometime in 1972, the hole spacing for the trunk lid changed from 3 inches to 4-1/4 inches spacing. This hinge will have the 4-1/4 inch spacing. These are welded to the body, expect some cleanup to the metal prior to...

$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30816 -

Used Grade A - Hood latch brace, brace only, fits all 1967-68 Mercury Cougars. Straight piece, this is typically the only part of the hood latch assembly that gets damaged in a collision. This is Grade A used, we also have Grade B braces that need some massaging to be perfect.Ford part number C7WY-16747-A.

$0 Price: $42.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30817 -

Used Grade B - Hood latch brace, brace only, fits all 1967-68 Mercury Cougars. Grade B brace that will need some massaging to be perfect. These are fairly easy to get straight enough cosmetically. We also sell complete assemblies and Grade A used braces.Ford part number C7WY-16747-A.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20079 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

$0 Price: $60.05

Buy Details

Availability: In-Stock Item
Item #: 10514 -

Improved reproduction left hand hood hinge for the Mercury Cougar and Ford Mustang. Very heavy duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs, originals weigh 3.2 lbs. Hood hinge rivets have the 'plus' markings like seen on the 1969-70 hinges. Save your hinge springs, these do not come with the new springs. It is easier to fit and adjust these hinges without the spring installed on them. We use an old section of seat belt for removing...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14566 -

If you are not looking to match the part numbers of your original hinges, we recommend considering our PREMIUM quality reproduction that is made of thicker material than the originals for added durability and is far superior to any previous reproduction. This listing is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set.   We carefully inspect these hinges before sending them...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14568 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the spring. These will also work on 1967-70 as well....

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14570 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the spring. These will work on all 1967-70 as well. But...

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14572 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped without the spring. These will also work on 1967-70 as well....

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27266 -

Good used OEM original driver side hood hinge. Available individually or as a set. These are far superior to the off shore reproductions you see advertised everywhere. The reproductions are very difficult to make fit and do not last very long. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. It is easier to fit and adjust these hinges prior to installing the springs on them. Here is a helpful youtube video that shows you how to...

$0 Price: $60.05

Buy Details

Availability: In-Stock Item
Item #: 10513 -

Improved reproduction right hand hood hinge for the Mercury Cougar and Ford Mustang. Very heavy duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs, originals weigh 3.2 lbs. Hood hinge rivets have the 'plus' markings like seen on the 1969-70 hinges. Save your hinge springs, these do not come with the new springs. It is easier to fit an adjust these hinges without the springs installed on them. We use an old section of seat belt for removing...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14567 -

If you are not looking to match the part numbers of your original hinges, we recommend considering our PREMIUM quality reproduction that is made of thicker material than the originals for added durability and is far superior to any previous reproduction. This listing is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set.   We carefully inspect these hinges before sending them...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14569 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the spring. These will also work on 1967-70 as well....

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14571 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. You can find the hood hinge apron nuts here. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with...

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14573 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped without the spring. These will also work on 1967-70 as well....

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11264 -

Good used OEM original passenger side hood hinge. Available individually or as a set. These are far superior to the off shore reproductions you see advertised everywhere. The reproductions are very difficult to make fit and do not last very long. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. It will be easier to fit and adjust the hinge prior to installing the spring on the hinge. Here is a helpful youtube video that shows you how...

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23682 -

Good used OEM original hood hinge set. Available individually or as a set. These are far superior to the off shore reproductions you see advertised everywhere. Fits 1971-73 Mercury Cougar and Ford Mustang. The reproductions are very difficult to make fit and do not last very long. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the springs.Ford...

$0 Price: $52.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19246 -

Used hood latch for a 1969 Mercury Cougar, it will fit the 1970 too. Starting in 1969 until 1970, Mercury had three different hood latches. This early 1969 version has the shortest handle, and is the hardest to operate. Those early 1969 latches are a two finger operation for those of us with large hands. The part shipped will likely not be as clean as the one in the picture.Replaces Ford part number C9WY-16700-A.

$0 Price: $52.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19262 -

Used hood latch for a 1969 Mercury Cougar, it will fit the 1970 too. Starting in 1969 until 1970, Mercury had three different hood latches. This late 1969 version has the medium length handle. Those early 1969 latches are a two finger operation for those of us with large hands. The part shipped will likely not be as clean as the one in the picture.Replaces Ford part number C9WY-16700-B.

$0 Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19290 -

Used hood latch for a 1970 Mercury Cougar, it will fit the 1969 too. Starting in 1969 until 1970, Mercury had three different hood latches. This 1970 version has the longest handle, and is the easiest to operate. Those early 1969 latches are a two finger operation for those of us with large hands. The part shipped will likely not be as clean as the one in the picture.Replaces Ford part number D0WY-16700-B.

$0 Price: $96.25

Buy Details

Availability: In-Stock Item
Item #: 14062 -

A modern touch to this classic muscle car look. This kit is the same Scott Drake "Shelby Style" Billet hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, machined billet aluminum top plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are Machined billet aluminum top plates and the deluxe is stainless steel. Common...

$0 Price: $63.35

Buy Details

Availability: In-Stock Item
Item #: 13779 -

This kit is the same Scott Drake "Shelby Style" DELUXE hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between the standard version and this deluxe version, is that the standard is chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the...

$22.95 Price: $33.17

Buy Details

Availability: In-Stock Item
Item #: 42020 -

This kit is the same Scott Drake "Shelby Style" hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the exact location varied from...

$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30815 -

Used hood release latch by itself, this is a component of the hood latch assembly for any 1967-68 Mercury Cougar.

$0 Price: $25.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32039 -

Welded in hooked retainer for the rear seat back installation on any 1967-73 Mercury Cougar or Ford Mustang coupe or hard top body style. This bracket welds to the edge of the package tray. Two hooks per car, sold individually. We cut out a individual sections as shown. Make good measurements prior to removal of your old brackets. You will need to drill out the spot welds prior to installation. For sure that basic Ford part number is 62118.

$0 Price: $89.96

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22994 -

This is the large horizontal bracket that reinforces the front bumper on any 1971-72 Mercury Cougar. This is one of 6 brackets needed for mounting the front bumper. These were bare steel and some of our used brackets will have some erosion or minor rust. Structurally they are fine. Replaces Ford part number D1WY-17A792-A.

$0 Price: $70.90

Buy Details

Availability: In-Stock Item
Item #: 23440 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position.  These horns are close but not actually correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B Lo / C7WF-13801-B Hi and 1971-73 used D0DF-13802-A Lo /...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 23563 -

This item has been discontinued until further notice.Basically correct looking except for screws in place of the rivets. The High or Low tone is indicated in raised letters located on the perimeter of the horn. Replaces Ford Part #: C9ZZ-13832 / C9ZZ-13833 or C9ZF-13801-B / C9ZF-13802-C.

$35.00 Price: $35.95

Buy Details

Availability: In-Stock Item
Item #: 13848 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position. We do offer the correct used Cougar horns.Replaces Ford Part # C7ZZ-13832. These horns are close but not correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B...

$35.00 Price: $38.57

Buy Details

Availability: Out of Stock
Item #: 13850 -

This item has been discontinued until further notice.The High tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13832 or C9ZF-13801-B.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27368 -

Tested and working used Hi tone horn. The High tone is indicated in raised letters located on the perimeter of the horn. 1967-68 Cougars used part number C7WF-13801-B Hi tone. Every horn is bench tested and inspected for cosmetic defects, if they do not function properly, and pass a visual inspection, they get recycled. The used horns at WCCC can be used as-is or you can clean and detail them for you show car.NOTE* - High tone horn is on the passenger side ...

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27374 -

Tested and working used Hi tone horn. The Hi tone is indicated in raised letters located on the perimeter of the horn. 1971-73 Mercury Cougar used part number D0DF-13801-A Hi tone. Every horn is bench tested and inspected for cosmetic defects, if they do not function properly, and pass a visual inspection, they get recycled. The used horns at WCCC can be used as-is or you can clean and detail them for you show car.

$35.00 Price: $35.95

Buy Details

Availability: In-Stock Item
Item #: 13852 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position. Replaces Ford Part # C7ZZ-13832. These horns are close but not correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B Lo / C7WF-13801-B Hi and 1971-73 used...

MSRP:$35.00
$35.00 Price: $28.67

Buy Details

Availability: Out of Stock
Item #: 13851 -

This item has been discontinued until further notice.The Low tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13833 or C9ZF-13802-C.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10867 -

Attaches behind the drivers side horn on all 1969-70 Mercury Cougar and Ford Mustangs with air conditioning. We believe that this part was installed to maintain clearance with the A/C condenser. Ford part number C9ZF-13925-A as seen in the 1969 Electrical Assembly Manual.

$0 Price: $75.47

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24088 -

Good used grade B horn bar with minimal pitting similar to what is shown in our pictures. Good for a driver quality classic or send it in for re-chrome for your show car. Will have all three vinyl pads / inserts in place but we cannot guarantee we will have your desired color. Please mention in the comments section what color you desire. Ford part number C7WA-3D755-A. Check out this video ...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19026 -

Good used grade B pad with dull trim ring and bad center emblem. Emblem will show discoloration, warping, cracks in the lens and maybe all three! Please let us know in the comments section when you make your online order what color you desire. Also keep in mind reproduction Mustang emblems are available and you can easily remove the COUGAR emblem and replace it with a Mustang emblem Check out this video ...

$0 Price: $43.65

Buy Details

Availability: In-Stock Item
Item #: 32359 -

Wire extension for horn relocation, when the drag pak or drag pack option was ordered typically with 3.91 or 4.30 rear axle ratio. Fits all 1969-70 Mercury Cougar or Ford Mustang with factory oil coolers. Should also fit Torino and Cyclone. Reproduction of Ford part number C9DB-13A840-A.

$0 Price: $33.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19285 -

Decent used horn ring but unlike our grade "A" used horn ring this one will have very minor pitting but no open blisters in finish. Good value for your driver quality 68-69 Ford / Mercury with two spoke steering wheel.

$0 Price: $78.25

Buy Details

Availability: In-Stock Item
Item #: 15309 -

Reproduction Two Spoke Steering Wheel Horn Ring for the 1968 and 1969 Mercury Cougar. This is a very good reproduction piece. The original horn contact pieces fit nicely. This casting, while different than the 1968 version with the empty cavities is actually stronger. *NOTE* Save your old horn ring, you will need to transfer the rubber spacer and the horn contacts to this reproduction part.*CUSTOMER REVIEW* Called WCCC the other day after calling around to a lot of garages and auto parts...

$0 Price: $28.75

Buy Details

Availability: Out of Stock
Item #: 13767 -

Aluminum flexible tube that connects the vapor canister to the air cleaner. To give this the look of the originals that had a black paper exterior coating you can spray paint it flat black. If anyone knows of a source to buy the original paper coated foil tubes we would like to hear from you. Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct.3ft long 7/8" O.D. 3/4" I.D. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A...

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 19996 -

Black paper wrapped aluminum flexible tube that connects the vapor canister to the air cleaner. This is as close to concours as we can find, 3/4 inch diameter, 36 inches long, and black outside, brown paper color inside.  Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A or D0AZ-9D667-A