Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 817-864 of 1446
$0 Price: $325.05

Buy Details

Availability: In-Stock Item
Item #: 30564 -

New manufactured Tilt / Tilt-Away cable for any 1968-69 Mercury Cougar or Ford Mustang with factory tilt steering column. All new parts developed by our in house steering column expert DW. Not created from used parts. The cable sheathing will not split or crack over time like the originals.Replaces Ford part number C9ZZ-3E520-A*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way...

$0 Price: $259.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0068 -

Keep in mind we can repair these for half or less of the price we charge to sell one outright. We can also install parts and or refurbish these columns. Ford part number C9ZZ-3E520-A *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $481.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31411 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY. Long block, factory C code 289-2V V-8 engine. Rated at 200 Hp with 9.3:1 compression ratio in 1967. 1967 289 engine that may or may not have been in running condition when pulled. Guaranteed to be rebuildable, most of these will already be bored 0.030", and need more. Complete engine less carburetor, distributor, exhaust manifolds, fan, accessories, pulleys, and flex...

$0 Price: $481.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12549 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY. Long block, factory C code 289-2V V-8 engine. Rated at 195 Hp with 8.7:1 compression ratio in 1968. Likely 0.030" bored motor that may or may not have been in running condition when pulled. Guaranteed to be rebuildable. Complete engine less carburetor, exhaust manifolds, fan, distributor, accessories, pulleys, and flex plate. Intake manifold and oil pan are included...

$0 Price: $481.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12550 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY. Long block, factory F code 302-2V V-8 engine. Rated at 210 Hp with 9.0:1 compression ratio in 1968. Likely 0.030" bored motor that may or may not have been in running condition when pulled. Guaranteed to be rebuildable. Complete engine less carburetor, exhaust manifolds, fan, accessories, pulleys, and flex plate. Intake manifold and oil pan are included but oil pan...

$0 Price: $375.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19263 -

Used only in 1968 on non xr7 models and Mustang. Very hard to come by with no splits, burns or cracks. We rarely can supply the color you desire but please let us know your desired color and we will try. Grade A will not have UV ray damage and will look right at home in a low mile car. Satisfaction guaranteed.  

$0 Price: $250.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27460 -

This is a good used main power window wiring harness that passes through the firewall, travels along the passenger side engine compartment and mates the the rectangular power window relay. Fits 1971-73 Mercury Cougars with factory power windows. Also powers the convertible top switch only when power windows are included. This is a Grade A harness that has been tested and inspected. This harness will look and function correctly. We also sell a Grade B harness that will have at least one...

$0 Price: $425.00

Buy Details

Availability: In-Stock Item
Item #: 41328 -

Fits Standard and XR7.Made in the USA

$0 Price: $375.03

Buy Details

Availability: In-Stock Item
Item #: 41329 -

Reproduction body / exterior master fastener kit for the Mercury Cougar that fits both Standard and XR7. *NOTE* If you click on the selections below, they will take you to each of the sub kits that are included in the main fastener kit. In this kit you will receive the following fasteners: Hood Bumpers (adjustable) Hood Latch Dowell Valance (front) Valance (rear) Door Hinges Floorboard Hole Covers Fenders Fender Splash Shield Brackets Hood and Hinges Shock Tower Braces Cowl Brace to Cowl...

$0 Price: $270.00

Buy Details

Availability: In-Stock Item
Item #: 99300 -

Facebook sale item

$0 Price: $360.00

Buy Details

Availability: In-Stock Item
Item #: 99400 -

Facebook sale item

$0 Price: $450.00

Buy Details

Availability: In-Stock Item
Item #: 99500 -

Facebook sale item

$0 Price: $495.00

Buy Details

Availability: In-Stock Item
Item #: 99550 -

Facebook sale item

$0 Price: $315.00

Buy Details

Availability: In-Stock Item
Item #: 99350 -

Facebook sale item

$0 Price: $405.00

Buy Details

Availability: In-Stock Item
Item #: 99450 -

Facebook sale item

$0 Price: $325.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32451 -

Good used motor taken from a 71-73 Cougar. Motor has been taken apart, serviced and tested. We only sell these on an exchange basis and you must send your core in advance.

$0 Price: $326.88

Buy Details

Availability: In-Stock Item
Item #: 11736 -

Set of restored windshield pillar post mouldings / trim for the Mercury Cougar convertible. If your stainless parts have no real damage you may consider investing in a cheap standing buffer and polishing kit. When you purchase one of our restored stainless trim parts you are paying for the removal of dings and scrapes as well as the polishing of the part. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

$0 Price: $316.89

Buy Details

Availability: Out of Stock
Item #: 18595 -

Used driver side (left hand) convertible top boot trim moulding / trim for the 1971-73 Mercury Cougar convertible. If it were not for the paint over-spray on the black stripe of the drivers side piece these would be ready to bolt on and go! This is the best used example we have ever had in stock. We have several sets in stock with moderate to heavy pitting that are reasonably priced. Ford casting number reads D1WB-76423A19-AA or D1WY-76423A19-A. *Note - This item is not correct for a Ford...

$359.99 Price: $449.85

Buy Details

Availability: In-Stock Item
Item #: 25904 -

Sold as a pair, comes with stud and nut mounting kit. Correct for all 69-70 Mustang / Shelby / Standard Cougar convertibles.  Replaces Ford part # C9ZB-76423A18-A & C9ZB-76423A19-A (Not for XR7). Are you thinking about installing a convertible top yourself? Check out our video below for help. ...

$0 Price: $289.89

Buy Details

Availability: In-Stock Item
Item #: 30217 -

Restored driver side (left hand) convertible top boot moulding / trim for the Mercury Cougar XR7 convertible. These are unique to the XR7 as the standard convertibles used the shorter version (same as Mustang) that ended at the quarter window. We require you send a restorable core in exchange in advance to get this pricing. If your part is missing the aluminum belt-line weatherstrip mount then the part you receive in exchange will also be missing it.Ford part # C9WB-76423A19-A. ...

$0 Price: $289.89

Buy Details

Availability: In-Stock Item
Item #: 30218 -

Restored Passenger side (right hand) convertible top boot moulding / trim for the Mercury Cougar XR7 convertible. These are unique to the XR7 as the standard convertibles used the shorter version (same as Mustang) that ended at the quarter window. We require you send a restorable core in exchange in advance to get this pricing. If your part is missing the aluminum belt-line weatherstrip mount then the part you receive in exchange will also be missing it. Casting # C9WB-76423A18-B. ...

$384.99 Price: $481.23

Buy Details

Availability: In-Stock Item
Item #: 11597 -

Nice reproduction of the convertible boot moulding for the 1971 - 1973 Ford Mustang, but also works on the 1971 - 1973 Cougar. *The Cougar originally would have had a different contour and a painted black stripe down the length of the moulding.

$0 Price: $314.87

Buy Details

Availability: Rare / NOS Part
Item #: 10356 -

NOS driver side (left hand) fender extension moulding / trim for the Mercury Cougar including XR7 and Eliminator. This unit is missing its wrapper and does show some shelf wear as do most delicate NOS trim parts.Ford part # C9WY-16075-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If...

$0 Price: $314.87

Buy Details

Availability: Rare / NOS Part
Item #: 10355 -

NOS passenger side (right hand) fender extension moulding / trim for the Mercury Cougar including XR7 and Eliminator. This unit is missing its wrapper and does show some shelf wear as do most delicate NOS trim parts.Ford part # C9WY-16074-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon...

$0 Price: $300.00

Buy Details

Availability: Rare / NOS Part
Item #: 41117 -

This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some very minor freckling in the chrome. Usually the attaching nuts are missing from the Ford boxes. May or may not include the Ford box, depends on stock.Mercury part # D1WY-16958-A, Mercury casting # D1WB-16958-AA.

$0 Price: $385.00

Buy Details

Availability: Rare / NOS Part
Item #: 42378 -

1969 - 1970 Cougars came factory equipped with stainless trunk mouldings and 1967 - 1968 Cougars came equipped with anodized aluminum trunk lid mouldings. However if you ordered a 67-68 service replacement deck moulding from Ford anytime after 1968 you would have received a stainless steel replacement. We recently obtained 15 of these that were stored improperly where the packaging had deteriorated and the mouldings showed shelf wear. We sent them out to be polished and the results are...

$0 Price: $260.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20430 -

Used driver side (left hand) Sport Special rocker panel moulding / trim for the Mercury Cougar. These only came on the midyear 1969 Sport Special Cougars, but have been popular with all 1967 - 1970 Cougar owners for years now. We regret not being able to come up with anything better than these "driver quality" units shown here. Notice the two small extra screw holes. These are very costly to have restored so be aware this is an expensive endeavor should you go that route. To learn more...

$0 Price: $260.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12019 -

Used passenger side (right hand) Sport Special rocker panel moulding / trim for the Mercury Cougar. These only came on the midyear 1969 Sport Special Cougars, but have been popular with all 1967 - 1970 Cougar owners for years now. We regret not being able to come up with anything better than these "driver quality" units shown here. Notice the two small extra screw holes. These are very costly to have restored so be aware this is an expensive endeavor should you go that route. To learn...

$0 Price: $270.86

Buy Details

Availability: Rare / NOS Part
Item #: 42375 -

Replaces Ford part number C9WY-16039-B.

$0 Price: $270.86

Buy Details

Availability: Out of Stock
Item #: 42354 -

NOS driver side (left hand) front wheel lip moulding / trim for your Mercury Cougar.Ford part # C7WY-16039-A.

$0 Price: $303.89

Buy Details

Availability: Rare / NOS Part
Item #: 42385 -

Front driver side wheel lip moulding. Fits all 1971-73 Mercury Cougars.Replaces Ford part number D1WY-16039-A.

$0 Price: $319.86

Buy Details

Availability: Rare / NOS Part
Item #: 18669 -

Driver side rear wheel lip moulding. Fits any 1967-68 Mercury Cougar except GT-E models.Replaces Ford part number C7WY-6529165-A.

$0 Price: $341.87

Buy Details

Availability: Rare / NOS Part
Item #: 18707 -

New Old Stock driver side rear wheel lip moulding for any 1969-70 Mercury Cougar.Replaces Ford part number C9WY-6529165-A, or D0WY-6529165-A.

$0 Price: $358.88

Buy Details

Availability: Rare / NOS Part
Item #: 42361 -

Why is this right rear wheel lip so costly and difficult to find these days? Consider this... The right rear was the first to go obsolete from Ford. The right rear is the one most likely to get damaged because of it being the corner that is in the "blind spot". Remember, these early Cougars did not have RH mirrors! Lastly and maybe the most relevant is the fact that the right rear wheel is your traction tire which means more damage from flying road debris, loose tire chains and the like. It...

$0 Price: $378.86

Buy Details

Availability: Rare / NOS Part
Item #: 42386 -

Rear passenger side wheel lip moulding. Keep in mind we will take a restorable core moulding in partial trade on this very hard to find part.Replaces Ford part number D1WY-6529164-A.

$0 Price: $374.85

Buy Details

Availability: In-Stock Item
Item #: 20450 -

This is a four piece set of correctly restored, anodized aluminum hood / fender trim. You will need to paint the recessed areas black or argent depending on whether your Cougar is an Eliminator, XR7 or Standard model. Our 1970 mouldings are sold on exchange basis or outright. If you have extra 1969-1970 cores we would be happy to purchase or or allow an in store credit for them. Ford part numbers from the MPC are as follows: D0WY-16074-A, D0WY-16075-A, D0WY-16856-A, and D0WY-16857-A. Clips are...

$0 Price: $279.86

Buy Details

Availability: In-Stock Item
Item #: 30296 -

Restored three piece anodized aluminum rear moulding / trim set for the rear of the 67-68 Mercury Cougar. These pieces attach to the rear deck / trunk lid and the quarter extensions. New and used clips also available separately. Ford part #: Driver side quarter extension moulding C7WY-6529313-A, passenger side C7WY-6529314-A, deck lid moulding C7WY-6542512-A. *NOTE* Keep in mind that we do give in-store credit for extra core trim and mouldings you may have laying around (from a Cougar of...

$0 Price: $279.86

Buy Details

Availability: In-Stock Item
Item #: 20328 -

Restored three piece anodized aluminum rear moulding / trim set for the rear of the 67-68 Mercury Cougar. These pieces attach to the rear deck / trunk lid and the quarter extensions. New and used clips also available separately. Ford part #: Driver side quarter extension moulding C7WY-6529313-A, passenger side C7WY-6529314-A, deck lid moulding C7WY-6542512-A. If you select this option (paying a core charge), we will randomly select mouldings off the shelf. Paying the core charge does not...

$0 Price: $274.86

Buy Details

Availability: In-Stock Item
Item #: 11517 -

Restored four piece aluminum rear window moulding / trim set correctly restored with an anodized and a bright dip finish and polished to a very high luster.Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.

$0 Price: $322.38

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15506 -

Good set of four diecast original top mouldings for both two tone paint Cougar hardtops and 1970 Cougars with a factory installed Hounds-Tooth checkered vinyl top. No broken studs, cracks, bends or chips. Originally these came painted on most cars, but in rare cases like the 1970 Hounds-tooth edition or select two tone paint cars, they came chrome plated. These mouldings will need to be re-chromed to look their best.

$0 Price: $385.88

Buy Details

Availability: Out of Stock
Item #: 10136 -

Restored 6 piece vinyl top moulding / trim set for the Mercury Cougar equipped with the full vinyl top. You could have gotten your 1971-3 Cougar with either a full or half vinyl top and the moulding trim set for each is very different. This full top set has 6 pieces where the half top set is only 2 pieces. While this moulding / trim is restored, you will need to paint the detail stripe semi-gloss black yourself.  *RESTORATION TIP* You will need a can of good quality semi-gloss black...

$0 Price: $345.24

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20315 -

Good set of four, used wheel lip mouldings for your 1967 - 1968 Mercury Cougar. What is considered to be an "acceptable core" is solely at our discretion. If you are in question as to what good cores are, please send quality, in focus, close-up digital pictures to westcoast@classic-cougar.com *NOTE* Some "on the edge" cores that need extra labor can be given a partial credit.Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

$0 Price: $358.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27142 -

Set of used windshield pillar post mouldings / trim for the Mercury Cougar convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. With a bit of elbow grease and time, you can make those trim pieces look better than new! Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

$0 Price: $400.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27139 -

This original FoMoCo, six piece windshield trim set for the Mercury Cougar convertible. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions. This package is also an excellent option for you Mustang owners as well. The four upper pieces are wider than the coupe versions, but the lowers are the same (with about an inch cut off the ends). The trim is... trimmed so it will fit underneath the pillar trim pieces. *NOTE* If your trim has...

$0 Price: $349.89

Buy Details

Availability: In-Stock Item
Item #: 20432 -

This 3-piece blemished front trim set and a scratch obtained during shipping, an irregularity in the anodized plating process, a ding in a hard to reach spot, a slip on the buffer wheel... There are many reasons why we label our restored trim parts as blems. We carefully examine every trim part that comes back from our restorer for the smallest of imperfections. If we would not place them on our $40,000.00 Cougar we do not expect you to. From 10-15 feet away these look as good as our...

$0 Price: $449.85

Buy Details

Availability: In-Stock Item
Item #: 11673 -

*NOTE* Due to the difficulty in obtaining 69 aluminum trim we no longer sell these without first having you send us your cores. Keep in mind we pay well for quality 69 hood lip mouldings. Do not contact us with pretzel shaped parts, parts you have attempted to fix or flattened out parts. We require trim parts showing only minor dings / dents, scratches and dullness. These restored mouldings have the correct "bright dip" anodized finish and look almost like NOS! This set is offered at a great...

$0 Price: $287.95

Buy Details

Availability: In-Stock Item
Item #: 32005 -

This listing is for the person who only has rust under the lip at the front and does not want to pay shipping on an entire frame that must ship via truck freight. It will come as shown unless you contact us. The part will be the same price no matter where we cut it, let us know in the comments section where you would like us to cut if you want something other than what is shown. ...