Contact Us / Visit Us (click here)
Due to a Global Cyber Issue some credit / debit cards are not able to be processed at this time.
International Customers Click Here [Updated 6/2024]
Loading Trivia . . .
  • Moulding / Trim Set - Front - Set of 4 - Restored ~ 1970 Mercury Cougar - 20450
  • Moulding / Trim Set - Front - Set of 4 - Restored ~ 1970 Mercury Cougar - 20450
  • Moulding / Trim Set - Front - Set of 4 - Restored ~ 1970 Mercury Cougar - 20450
  • Moulding / Trim Set - Front - Set of 4 - Restored ~ 1970 Mercury Cougar - 20450
  • Moulding / Trim Set - Front - Set of 4 - Restored ~ 1970 Mercury Cougar - 20450

Item #: 20450

Login to add this item
to a saved wishlist
Price: $374.85
    Cost: 29988
    Earns: 1500
    Bonus: 0


    In-Stock Item - Next Business Day



    This is a four piece set of correctly restored, anodized aluminum hood / fender trim. You will need to paint the recessed areas black or argent depending on whether your Cougar is an Eliminator, XR7 or Standard model. Our 1970 mouldings are sold on exchange basis or outright. If you have extra 1969-1970 cores we would be happy to purchase or or allow an in store credit for them.

    Ford part numbers from the MPC are as follows: D0WY-16074-A, D0WY-16075-A, D0WY-16856-A, and D0WY-16857-A.

    Clips are not included. If you need new clips: SKU # 10543

    *NOTE* Keep in mind we will buy your extra core trim or allow credit towards the purchase of our restored trim. if you have no core trim to exchange, we do have cores for sale.

    DID YOU KNOW?  Kurt Lawrance at Kurt's Restoration & Collision (formerly KTL Restorations in Danville Virginia) reports that the correct color for the 1970 hood trim set can be obtained from RM Paint, Diamont code C2MMA878.50. The same basic color can be obtained in aerosol can form from multiple sources that market it as 67-68 Mustang / Cougar lower dash paint.  

    Aluminum trim restoration & core exchanging video:

    Shipping Weight: 5.00 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    When sending us your core(s), we will need a copy of your invoice. Or at the very least, your invoice number which is located at the top left corner of your original invoice. We will also need the date of your purchase.

    Once you have your trim cores packed, we suggest that you take them outside and throw them up into the air as high as you can. After your box lands, jump on it. If you do not think that it will survive, you have not packed it well enough. We have discovered that this type of abuse is typical with shipping. We are not responsible for any damages that may occur in shipping.

    Do not send us pretzel shaped parts, parts you have attempted to fix yourself, or flattened out parts. We need trim parts showing only MINOR dents, dings, dullness, or scratches.

    Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores.

    Keep in mind we buy most trim and mouldings found on a Cougar.

    No Reviews Found, be the first to review this product.
    Number of questions: 1
    Please login to ask a question.
    Are the required hood lip moulding / trim clips included with the set of 4 restored pieces ?
    January 24, 2023 4:19 PM
    WCCC Admin Answered:
    Clips are not included. If you need new clips: ??SKU # 10543
    January 25, 2023 2:38 AM

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?

    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...
    - MartinD
    My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...
    - Frank
    Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...
    - Mike Dunlap
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)